Garageband loops gone missing

Try to rebuild the loop index, if you have not yet done so.

• click the pair of up and down arrows to the right of "Sound Packs Show All " to show the list of installed sound packs. At the bottom of this list should be the command to rebuild the loop index.
• Then wait, it may take a while.

You may also want to check the GarageBand Settings.

• In the GarageBand > Settings click the tab "Loops". If "Filter for more relevant results" should be set, disable it. This option may remove quite a few loops from the browser.

Hi ayane3108,

Let's start up in safe mode and test. This will help and possibly resolve this unexpected behavior in GarageBand.

"Before you begin

To start up your Mac in safe mode, you need to know what type of Mac you have.

1. On your Mac, choose Apple menu  > About This Mac.
2. Look at the information in the window to determine what type of Mac you have:

• If you see an item labeled Chip, followed by the name of the chip, you have a Mac with Apple silicon.
• If you see an item labeled Processor, followed by the name of an Intel processor, you have an Intel-based Mac.

1. Use the corresponding set of instructions below to start up your Mac in safe mode.

Start up your Mac with Apple silicon in safe mode

1. On your Mac, choose Apple menu  > Shut Down.
2. Wait for your Mac to shut down completely. A Mac is completely shut down when the screen is black and any lights (including in the Touch Bar) are off.
3. Press and hold the power button on your Mac until “Loading startup options” appears.
4. Select a volume.
5. Press and hold the Shift key, then click Continue in Safe Mode.
6. The computer restarts automatically. When the login window appears, you should see “Safe Boot” in the menu bar.

Start up your Intel-based Mac in safe mode

1. Turn on or restart your Mac, then immediately press and hold the Shift key until you see the login window.
2. Log in to your Mac.
3. You might be asked to log in again.
4. On either the first or second login window, you should see “Safe Boot” in the menu bar.

Verify your Mac started up in safe mode

If you’re unsure whether your Mac started up in safe mode, you can use the System Information app to check the mode.

1. On your Mac, press and hold the Option key, then choose Apple menu  > System Information.
2. In the System Information app, select Software in the sidebar.
3. In the System Software Overview, look at the value listed next to the item labeled Boot Mode.

• Safe: The Mac is using safe mode.
• Normal: The Mac is not using safe mode.

"

Start up your Mac in safe mode - Apple Support

Cheers.