Wifi connection is gone when I plug my mac into the monitor

I use Mac M1 2020 with Ventura 13.4 OS.

Everytime I plug my mac to monitor using my connector, suddenly my internet gone. It's really painful, I can present my project to my team mate during the meeting with the team. How come this possible with expensive product like mac? Any solution?

MacBook Pro (M1, 2020)

Posted on Jun 14, 2023 2:51 AM

Reply
Question marked as Best reply

Posted on Jun 14, 2023 6:25 AM

Why do I have difficulty with Wi-Fi or Bluetooth devices when USB 3 devices are attached to my computer?



Some USB 3 devices can generate radio frequency interference that can cause Wi-Fi and Bluetooth devices operating in the 2.4GHz band to have issues communicating with your computer. Here are some tips to avoid this issue:

• If your USB device has a cable long enough that you can move the device, place it away from your Mac—and make sure not to place it behind your Mac, or near the hinge of its display. The antennas for Wi-Fi and Bluetooth are located there, and USB 3 devices placed there might interfere with your wireless connections.

• If you're using adapters or dongles on a Mac computer with Thunderbolt 3 (USB-C) ports, plug them into the front port on the left side of your Mac, or into the ports on the right side (if your computer has them). These ports are the farthest away from the antennas, making interference less likely.

• To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. You can change this on your wireless base station. Bluetooth always uses 2.4GHz, so this alternative isn't available for Bluetooth.

from:

About USB on Mac computers - Apple Support

Resolve Wi-Fi and Bluetooth issues caused by wireless interference

Resolve Wi-Fi and Bluetooth issues caused by wireless interference - Apple Support



1 reply
Question marked as Best reply

Jun 14, 2023 6:25 AM in response to LAB_Alfredo

Why do I have difficulty with Wi-Fi or Bluetooth devices when USB 3 devices are attached to my computer?



Some USB 3 devices can generate radio frequency interference that can cause Wi-Fi and Bluetooth devices operating in the 2.4GHz band to have issues communicating with your computer. Here are some tips to avoid this issue:

• If your USB device has a cable long enough that you can move the device, place it away from your Mac—and make sure not to place it behind your Mac, or near the hinge of its display. The antennas for Wi-Fi and Bluetooth are located there, and USB 3 devices placed there might interfere with your wireless connections.

• If you're using adapters or dongles on a Mac computer with Thunderbolt 3 (USB-C) ports, plug them into the front port on the left side of your Mac, or into the ports on the right side (if your computer has them). These ports are the farthest away from the antennas, making interference less likely.

• To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. You can change this on your wireless base station. Bluetooth always uses 2.4GHz, so this alternative isn't available for Bluetooth.

from:

About USB on Mac computers - Apple Support

Resolve Wi-Fi and Bluetooth issues caused by wireless interference

Resolve Wi-Fi and Bluetooth issues caused by wireless interference - Apple Support



Wifi connection is gone when I plug my mac into the monitor

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.