How can I safely remove the battery cover on Apple AirTag?

We were able to get the AirTag open by using one of those small rubber jar gripper mats that people use to, of course, help open jars.

1. Press down on the polished stainless steel battery cover of your AirTag and rotate counterclockwise until the cover stops rotating.
2. Remove the cover and battery.
3. Insert a new CR2032 lithium 3V coin battery (available at most electronic and drug stores) with the positive side facing up. You'll hear a sound indicating that the battery is connected.
4. CR2032 batteries with bitterant coatings might not work with AirTag or other battery-powered products, depending on the alignment of the coating in relation to the battery contacts.
5. Replace the cover, making sure that the three tabs on the cover align with the three slots on the AirTag.
6. Rotate the cover clockwise until it stops.

If you can't get it removed I suggest you take it into an Apple Store or Apple Authorized service provider for assistance: Contact - Official Apple Support

The best method is generally to gently press on the cover with two thumbs positioned at the outer edge of the cover; and rotate.

How to replace the battery in your AirTag - Apple Support

NOTE: Do NOT use replacement batteries w/ “bitterant” coating. (common on Duracells)

You’re welcome. 👍

It’s indeed a bit of an acquired technique.

I suspect many with difficulties simply have too high a Squeeze:Torque Ratio.

Indeed, gentle is the answer. I was having the same problem. Your recommendation worked for me. Thanks!