I have an eleven year old Mac Airbook. Bought a refurbished one to replace it. Ran Migration Assistant and it hung. Restarted Migration Assistant and it said it was successful. New Mac Airbook tried to boot up and says there is an error and loops there. How do I fix this?
caroly47 Said:
"New Mac Airbook won’t boot up after Migration Assistant used from old Mac air book: I have an eleven year old Mac Airbook. Bought a refurbished one to replace it. Ran Migration Assistant and it hung. Restarted Migration Assistant and it said it was successful. New Mac Airbook tried to boot up and says there is an error and loops there. How do I fix this?"
-------
Troubleshooting a Mac Stuck in a Boot Loop:
Is this consistent? If so, it seems you are in a boot loop. So, refer to the following...
I. Boot in Safe Mode:
In Safe Mode, Login Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install. For instructions, go here: How to Use Safe Mode on your Mac - Apple Support
II. Reset your SMC and your NVRAM:
(Applies to Intel-Basel Macs Only) Sometimes changes (i.e. Installations) are made to the system and then settings (i.e. Networking) become corrupted, technically. So, reset both on your Mac. So, reset the SMC and reset the NVRAM or PRAM. It might take three tries. to fix this. So, be certain you have the time to do so.
Start With This:
III. Re-Mount the Drive:
Boot into Recovery Mode (Intel or Silicon) . You need to click the “Mount’ button to proceed. So, select the drives, and then click "Mount" Try rebooting once more. If of no success, then click unmount button, and then the mount button. Try rebooting once more. It looks dulled-out. So, if you cannot click it, then click the First Aid button to fix this volume
caroly47 Said:
"New Mac Airbook won’t boot up after Migration Assistant used from old Mac air book: I have an eleven year old Mac Airbook. Bought a refurbished one to replace it. Ran Migration Assistant and it hung. Restarted Migration Assistant and it said it was successful. New Mac Airbook tried to boot up and says there is an error and loops there. How do I fix this?"
-------
Troubleshooting a Mac Stuck in a Boot Loop:
Is this consistent? If so, it seems you are in a boot loop. So, refer to the following...
I. Boot in Safe Mode:
In Safe Mode, Login Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install. For instructions, go here: How to Use Safe Mode on your Mac - Apple Support
II. Reset your SMC and your NVRAM:
(Applies to Intel-Basel Macs Only) Sometimes changes (i.e. Installations) are made to the system and then settings (i.e. Networking) become corrupted, technically. So, reset both on your Mac. So, reset the SMC and reset the NVRAM or PRAM. It might take three tries. to fix this. So, be certain you have the time to do so.
Start With This:
III. Re-Mount the Drive:
Boot into Recovery Mode (Intel or Silicon) . You need to click the “Mount’ button to proceed. So, select the drives, and then click "Mount" Try rebooting once more. If of no success, then click unmount button, and then the mount button. Try rebooting once more. It looks dulled-out. So, if you cannot click it, then click the First Aid button to fix this volume
New Mac Airbook won’t boot up after Migration Assistant used from old Mac air book
