When i move samples around in the workspace, snapping to the grid works correctly. And when i drag & drop samples into the workspace from a finder, for example, the sample is linked specifically to the bars. How to disable snapping to bars when i drag & drop a sample?
MacBook Pro 16″
Ok, I dug a little deeper and think this might help.
Go to your project settings. And go to Smart Tempo page. Make sure the Set Imported Files to: is selected to OFF. See pic.
Ok, I dug a little deeper and think this might help.
Go to your project settings. And go to Smart Tempo page. Make sure the Set Imported Files to: is selected to OFF. See pic.
It should not make a difference when you drag and drop a sample to a track how the region is snapped. You can select how you want that to work in the SNAP menu. On your video you have snapped turned off so it looks like you're able to drop and move the sample anywhere on the track. Pull down the menu and select how you want things to snap. Smart is pretty handy. Also at the bottom of the menu, select absolute value. This makes sure things snap right on the spot.
Thanks for the answer! Yes, I know about this. But no matter what grid snap I set, it still snaps to the bars when I drag and drop it. I would like it to be possible to immediately place the sample in the required position when do it https://youtu.be/CJyh5L1EfuU
It worked as I needed before updating to version 11. And now I don’t know how to set it up(
Thank you, but unfortunately this didn't help(
I found that if i don't use a musical grid, the problem is solved and the snap mode when i drag becomes the same as it was set.
But what if i use a musical grid? Maybe this is a bug?
Thanks, but unfortunately this didn't help(
I found that if i don't use a musical grid, the problem is solved and the snap mode when i drag and drop becomes the same as it was set.
But what to do if i use a musical grid?
Snapping to bars when importing a sample.
