My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos.

1. I try to enter internet recovery.

2. It gives me a prompt to enter my WiFi password

3. I enter my WiFi password

4. It gives me an apple logo and a progress bar

5. The screen turns grey

6. I leave it for an hour

7. No change

Earlier Mac models

Posted on May 24, 2024 8:01 PM

Reply
Question marked as Top-ranking reply

Posted on May 24, 2024 8:13 PM

Alex3200f44 Said:

"My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos."

-------


Setting the Back Screen to Work:


Try the Following:



  • Boot in Safe Mode: [Hold Down: shift key, upon boot], In Safe ModeLogin Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install.


  • Bug Fixes: Connect an external screen. See if you can boot up and see it all. If so, try updating your Mac. Updates contain bug fixes. Hold down: [commandF1] or [command + dim screen]


  • Reset the SMC and your NVRAMSometimes when changes are made to the system(i.e. updates), system configurations (i.e. for Screen) become manipulated, technically. So, reset the SMC and NVRAM


Based on Personal Experience...

I see you have an extreme obsolete device. So, connect this to an external monitor or TV using HDMI. Do you get what you ware looking for? I would like to say that my 2018 MBP screen went dead 11 times during the times of COVID. With this being the case, sending service is all that was available at that moment. The culprit ended up being the connector between the LogicBoard and the screen. Perhaps this is that case here?

9 replies
Question marked as Top-ranking reply

May 24, 2024 8:13 PM in response to Alex3200f44

Alex3200f44 Said:

"My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos."

-------


Setting the Back Screen to Work:


Try the Following:



  • Boot in Safe Mode: [Hold Down: shift key, upon boot], In Safe ModeLogin Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install.


  • Bug Fixes: Connect an external screen. See if you can boot up and see it all. If so, try updating your Mac. Updates contain bug fixes. Hold down: [commandF1] or [command + dim screen]


  • Reset the SMC and your NVRAMSometimes when changes are made to the system(i.e. updates), system configurations (i.e. for Screen) become manipulated, technically. So, reset the SMC and NVRAM


Based on Personal Experience...

I see you have an extreme obsolete device. So, connect this to an external monitor or TV using HDMI. Do you get what you ware looking for? I would like to say that my 2018 MBP screen went dead 11 times during the times of COVID. With this being the case, sending service is all that was available at that moment. The culprit ended up being the connector between the LogicBoard and the screen. Perhaps this is that case here?

May 24, 2024 9:00 PM in response to Alex3200f44

Alex3200f44 Said:

"My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos: Hello. The computer currently has a copy of Windows. Which has the same issue happening as the mac os x installer so I don't believe safe mode would work. There is not an hdmi port or atleast not one I can see. And i have reset the smc and nvram many times. It could definitely be the connection between the screen and the logic board. But the display works perfectly fine while the apple logo and Internet recovery screens are being shown."

-------


Reinstall the macOS:

One option would be to reinstall the macOS to fix any bugs in this app. Nothing would be lost. It's just that misplaced items would be placed back to where they should be and corrupt system files would be replaced by clean files. Go Here: Reinstall macOS - Apple Support. Boot into Recovery Mode (Intel or Silicon).  Important: Prior to installing an update or performing a reinstallation, to prevent data loss, be sure to Back up your Mac with Time Machine. If you have no backup, then I'd say get this serviced. Set up a Genius Bar Appointment at your local Apple Store. There, it will be looked at and you'll be provided with your options.

May 24, 2024 10:08 PM in response to Alex3200f44

Alex3200f44 Said:

"Hello. I have tried to reinstall mac os x through all means that I could find. Whenever something starts to work. The screen goes blank again. I don't see how this applies to a bootable usb stick."

-------


Troubleshooting a Black Mac Screen:

Corrupt system files for the macOS would be replaced, and missing system files for the macOS would be installed.. So, I take it you've connected an external monitor. What happens when you take a screenshot of your Mac? Doe you see the grey screen? OR do you see you window and Desktop use fine.

May 24, 2024 8:47 PM in response to TheLittles

Hello. The computer currently has a copy of Windows. Which has the same issue happening as the mac os x installer so I don't believe safe mode would work. There is not an hdmi port or atleast not one I can see. And i have reset the smc and nvram many times. It could definitely be the connection between the screen and the logic board. But the display works perfectly fine while the apple logo and Internet recovery screens are being shown.

May 25, 2024 10:43 AM in response to TheLittles

Alex3200f44 Said:

"My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos: There is not a way to connect an external monitor

———-


Connecting an External Monitor:

Use this device:


Get this Serviced:

If it’s still just going black when, then take this in for a Genius Bar Appointment at your local Apple Store. There it will be diagnosed, and you’ll be provided with your options.



May 25, 2024 2:07 PM in response to Alex3200f44

Alex3200f44 Said:

"My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos: There is no usbc on the device. I may have made a fault in describing the issue. But the screen goes pure grey when booting macos usbs

———-


Getting this External Monitor to be Seen:


Some Links to Go By:





This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

My late 2011 Macbook Pro gives me a blank screen whenever i try to boot macos.

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.