Logic only recieves an audio signal from input 1 on my interface, but not the other inputs.

I have an Mbp M3 Pro, running 14.5 macOS. I am using the Presonus Studio 1810c as my interface which has 4 XLR inputs. The problem is that Logic is only seeing the signal form the #1 input of the interface. When creating a new audio track, setting the desired input to 1, and arming the track for recording, a signal is shown via meters in the track one panel When a mic is connected to input 1 on the interface. This is not the case with the other interface inputs. When a mic is connected to inputs 2,3,4, sound can be heard through the head phones connected to the interface, however, no signal meter is shown in logic. Recording is blank, and there waves in the regions. It will only record when a mic is connected to input 1.

The weird thing is that I can set the input to by any number on the rec. armed track, and logic will still show the signal meter from input 1 on the interface, even with software monitor box unchecked in the settings. Initially I thought maybe it was a setting on the interface that had disabled signals from inputs 2-4 to be sent to that daw, or maybe a bad mic, but i tried all 4 inputs with both mics in garage band and they worked and recorded flawlessly. so with garage band, seeing all 4 inputs and allowing me to record vocals from both mics, it leaves me to believe the issue may be with Logic.

I've alreayd moved the app to the recyle bin and reinstalled from the app store as suggested on this site, but the issue still persists. Any feedback would be greatly appreciated.