iOS 26.1 Face ID gets disabled automatically, overheating and battery drain on iPhone 12 Pro Max

I am using an iPhone 12 Pro Max running iOS 26. After updating to iOS 26.1, I am facing serious issues.




Face ID works properly for about 1–2 days and then automatically gets disabled. To make it work again, I have to restart my phone or reset Face ID. After 2 days, the same problem repeats.




Along with this, the phone is overheating, battery drains very fast and the device feels slow and laggy.




There was no physical damage or water exposure. These problems started only after updating to iOS 26.1




Kindly fix this issue through a software update.




Device: iPhone 12 Pro Max


iOS version: iOS 26.1




Thank you.

iPhone 12 Pro Max, iOS 26

Posted on Dec 8, 2025 10:47 PM

Reply
4 replies

Dec 8, 2025 10:49 PM in response to Kanjanappilli

Kanjanappilli wrote:

the phone is overheating,

📱Facing iPhone heating issues? Here's what worked for me on my iPhone 12 Pro:

1️⃣ Backup on iCloud/iTunes

2️⃣ Log out of Apple ID

3️⃣ Erase (Keep eSIM Data)


❌ DO NOT restore from backups! Set up as new iPhone. Wait 2-3 days - no issue! That Indicates...

✅ No hardware/ iOS issue


Now...

📦 Restore data gradually

🔍 Find app/settings causing heat



My experience says this is purely caused by some third-party app that you may have installed.


I am not aware of the ambient temperature in which you are using the iPhone. However --> Keeping iPhone, iPad, and iPod touch within acceptable ...


Store the device where the temperature is between -20º and 45º C (-4º to 113º F). Don’t leave the device in your car, because temperatures in parked cars can exceed this range.


Use iOS devices where the ambient temperature is between 0º and 35º C (32º to 95º F). Low- or high-temperature conditions might cause the device to change its behavior to regulate its temperature. Using an iOS device in very cold conditions outside of its operating range might temporarily shorten battery life and could cause the device to turn off. Battery life will return to normal when you bring the device back to higher ambient temperatures. Using an iOS device in very hot conditions can permanently shorten battery life.


Dec 8, 2025 10:48 PM in response to Kanjanappilli

It's not always the iOS update's fault!  Many things can cause phone problems.  If you tell people you think it's an iOS update, it might make it harder to fix or find a solution for the real issue.



Remember, the right question often leads to the solution!



Was/Is your device Jailbroken? If that's the situation, please be informed that attributing the issues to iOS updates may not be accurate.



iOS updates aim to enhance user experience, boost security, and fix bugs rather than disrupt core features. The majority of the issues after updates might stem from underlying, unmentioned factors. Updates won't typically alter personal data but may refine settings or features. Backup before major updates for safety. Review Apple's update details and backup advice for a smooth process.


Kindly consider checking your settings and addressing any device issues before attributing the issue to external factors. This could be a pure coincidence that the iOS update affected the iPhone functions.


Before initiating a standard iOS update, it's advisable to create a backup. Have you completed this step? If yes, proceed with the restoration from the backup.



See what each update does: OS — iOS 26, About iOS 18 Updates, About iOS 17 Updates, About iOS 16 Updates, About iOS 15 Updates, About iOS 14 Updates, About iOS 13 Updates, About iOS 12 Updates, and so on...


Dec 8, 2025 10:49 PM in response to Kanjanappilli

You may try some of these steps, please check after each step...


  1. Ensure your screen protector or case isn't obstructing the front-facing camera. See the poic below
  2. If you still need help, reset your Face ID, then set it up again. Go to Settings, tap Face ID & Passcode, then tap Reset Face ID. Next, tap Set up Face ID to set it up again. If Face ID isn't working on your iPhone or iPad Pro
  3. Sometimes, a simple restart can resolve temporary software glitches. Turn off your iPhone, wait for a few seconds, and then turn it back on.
    1. Restart the device. That's it.
    2. Still not solved --> Force restart iPhone - Apple Support
  4. Corporate iPhone Profile Check and Removal Guide
    1. Is this your corporate iPhone? Then please contact the system administrator of your corporate.
    2. If it is your device, in that case, do you have any profile installed by your corporate/organization/enterprise/School Management?
    3. Erase the profile added by you If you have installed a profile on your own --> Install or remove configuration profiles on iPhone - Apple ...
    4. Please contact the system administrator of the organization who provided the profile to you
  5. Parts and service history
    1. With iPhone 12 models and later using iOS 15.2 and later, you can go to Settings > General > About to see the parts and service history of your iPhone and you can see if the camera has been replaced. If the repair was done using genuine Apple parts and processes, you will see "Genuine Apple Part" next to Camera.
    2.  
    3. You will see an Unknown Part  message if the camera installation is incomplete or if the camera:
    4. Was replaced with a nongenuine camera
    5. Was already used or installed in another iPhone
    6. Isn't functioning as expected
    7. This message doesn't affect your ability to use your iPhone or access your camera. Learn more about iPhone parts and service history.
    8. If your iPhone's camera has been previously replaced, repaired, or serviced by an unauthorized service provider, it's worth noting that Apple may decline to provide service for your device. The decision to refuse service will depend on the specific components that were affected by the unauthorized service.
  6. If the issue persists, you can try resetting all settings on your iPhone. This will not erase your data but will reset all personalized settings to their default values. Go to Settings > General > Transfer & Reset > Reset > Reset All Settings and confirm the action. Note that you will need to reconfigure your settings afterward. All settings—including network settings, the keyboard dictionary, the Home screen layout, location settings, privacy settings, and Apple Pay cards—are removed or reset to their defaults. No data or media are deleted.
    1. Reset All Settings: Return iPhone settings to their defaults - Apple Support:- Return iPhone settings to their defaults
    2. You can return settings to their defaults without erasing your content.
    3. If you want to save your settings, back up your iPhone before returning them to their defaults. For example, if you’re trying to solve a problem but returning settings to their defaults doesn’t help, you might want to restore your previous settings from a backup.
  7. Make sure you have the latest updates installed.
    1. Update Over-the-Air (OTA) —> Update your iPhone or iPad - Apple Support (IN)
    2. Update using iTunes/Finder —> Update your iPhone, iPad, or iPod touch - Apple Support (IN)


If none of the above steps resolve the issue, it is recommended to reach out to Apple Support or visit an authorized service center for further assistance. They can provide specific guidance based on your device model and iOS version.



iOS 26.1 Face ID gets disabled automatically, overheating and battery drain on iPhone 12 Pro Max

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.