Mac Pro - NO Optical Audio Out - Apple says Yamaha - Yamaha says Apple

I've used the optical out from my Mac Pro to feed an older Yamaha receiver. Aside from having to select the optical output in the Sound preference pane, it just works.

I'd suggest you do a bit of troubleshooting, find some other piece of gear thats got an optical input and try connecting your Mac Pro to it. If that works, well then you need to look at the Yamaha. If it doesn't you need to trace back to the Mac Pro.

Good optical cable?

Using any adapters?

Have the cable plugged into the optical output and not the optical input?

The other thing you can do is see if you can locate another Mac and see if it will drive the Yammy without any problems.

Tom

And good luck!

Hi Lathe,

Hmmm, maybe were on to something. You mentioned that when you look at "Audio Devices" window, and that got me thinking. You may be using the wrong interface to control how audio is fed out of your Mac.

Audio Devices is the window used for setting up Audio/Midi devices. For instance you can use the Audio Devices window to set the bit rate and channel assignments for the various audio or midi i/o on the Mac. But that only configures the internal hardware. It does not control which audio or midi ports are actually used.

To get your Macs audio to be delivered though the optical output, try the following:

Open System preferences, either by clicking on the System Preferences Dock icon, of by selecting System Preferences from the Apple menu.

In the System Preferences window, click the Sound preference pane.

In the Sound pane window, click the tab labeled Output.

In the list of devices, select the Optical Output.

This should route audio from your Mac, such as music from iTunes, to the Optical output and on to your yammy receiver.

You can do the same for the various sound effects used by the system, by clicking the Sound Effects tab.

Hope that helps.

Tom

Hi Lathe,

I'd recommend trying another piece of gear with that same cable using an optical out to the yamaha receiver. If that looks good, then it's definitely something on the mac side of things and maybe the below will help.

Regarding this comment:
"Can I use the built-in digital output port for everything...just as I would the analog port?"

You technically should be able to use it for everything, but it's possible the Mac is outputting an incompatible digital signal to your receiver. Another test is using a movie from a DVD (or anything with digital tracks) that you can output with testing DTS and AC3 output to the receiver. It's possible your receiver supports some of the newer digital audio tracks as well, so those are worth a try as well.

It should be plug and play with the MAC, but I've had issues with other equipment using digital out to receivers and dealt specifically with the source format not being correct. My workaround for that, which probably doesn't apply to this situation, was using a tool to encode all my audio to AC3.

good luck.

Hi, Lathe,

Have you worked out the digital output issues? I have the same problem and have been using the analog output on the Mac Pro to connect to my pre-Amp in the past. Unfortunately, the Mac Pro analog connection just started making irritating humming noise. I am, thus, looking to troubleshoot and for a new solution as well.

Thanks for sharing.

PCET

irritating humming noise - can caused by poor audio cable, have you tried another one ?