I want to connect a obd2 bluetooth device. Do i have to buy an android?

there is no app that support this device, because of lack Apple's Bluetooth technologie,

Then apparently you misspoke when you said:

"There is a lot of applications compatible with this device, for Windows, for Android, and some of then for IOS as well."

Perhaps this was due to an insufficient command of English.

Anyway, I also consider this issue closed and will spend no further time at least your part of the question.

Adriano, you need to tell us specifically what apps you are trying to use. You also need to state exactly what happens when you try to use these apps with your device, assuming you've confirmed with the developers of the apps that they do indeed support the ELM327. Without that information, it is difficult if not impossible for anyone to offer any advice.

Regards.

Your Bluetooth device is not compatible with iPhone because it isn't Bluetooth LE. Try using a low cost wifi version of the device. This will be compatible with all apps, such as OBD Terminal or EOBD Facile.

Dear Mr Urban!

Answering your question: "HT3647 I want to connect a obd2 bluetooth device. Do i have to buy an android?" My answer for you is: YES!

I have ODB Bluetooth Device (ELM327) and it works so fine with my Android device (Samsung Galaxy 5), I'm using Android Torque app to manage information and it is awsome! There are two version of this app, Torque free which have a lot of resources, like configurable gauges and so on... and Torque Full a payed version with some more resources.

Thank you and have a nice evening!

/Adriano

Hi chaps, I'm new to iPad and came across this thread and would like to join in.

I understand from the above that iPad bluetooth isn't compatible with a whole lot of other bluetooth components out there.

I have recently purchased the Palmer Performance Engineering Dash Command OBD 2 engine diagnostics app via the itunes app store. If it's accepted by Apple as being compatable with an iPad, how do I connect with the OBD 2 socket on my car?

Kind regards,

ND

If it uses one of the bluetooth protocols specified here: http://support.apple.com/kb/HT3647 and / or you can find an app that is designed to do that, then you're fine. If not, then it won't work. What app are you trying to use?

Hi, All

Please allow me to clearify this issue.

I'm the developer of

NovaScan™ - The OBD Vehicle Dashboard, Gauge, Diagnostic and Tuning App for iOS

AppStore Link:

https://itunes.apple.com/us/app/novascan-obd-total-solution/id486952375?mt=8&ign -mpt=uo%3D4

* Currently, there is no 'Open ELM327 Bluetooth Interface' for iOS now.

This is because those bluetooth devices do not comply with

http://support.apple.com/kb/HT3647 and personally I think the manufacturers should make those devices to comply with Apple's policies for better compatibility. It's not that hard.

Thank you.

I may receive some form of compensation, financial or otherwise, from my recommendation or link.

<Edited by Host>

When looking at the latest support document for iOS, it appears that it does not support the particular profile they are talking about. iOS: Supported Bluetooth profiles - Apple Support I would say that is the issue as to why it will not pair.

OK. I give up. You found 2 apps that work. You don't tell us which one you're trying to use, if either, or what happens when you try. Tell ya what... when you want to provide some real information that we can work with to actually answer a question, come back and let us know.

I'm so sorry if I don't make myself clear.

Those two apps that I mention before works using OBDII protocol with does not mean they can connect with ELM327 Bluetooth Device via iPad or iPhone.

Anyway, you already gave up, and I'm not begging for this thing.

If someone else have some thoughts about it, I'll be pleasent to hear, thanks a lot!

/Adriano

Well, I can't find Protocol Log Works in the US App store, but I do see DashCommand.

According to the text in the app store, it requires a compatible 3rd party hardware interface which must be purchased separately. Nowhere in the text does it imply that you can connect via bluetooth. It DOES mention ELM compatible WiFi. Sounds like you just plain can't do that via bluetooth.

Varjak, good evening!

Dear friend, let me try to untangle this whole issue.

The ELM327 is a Bluetooth OBD-II Wireless Transceiver Dongle that you can plug into your car's OBD2 Port to read information from car's computer, engine and other stuff from vehicle.

There is a lot of applications compatible with this device, for Windows, for Android, and some of then for IOS as well.

The first thing you have to do is pair your "bluetooth receiver" (iPhone, iPad, Android Tablet or Phone, Laptop or any other bluetooth computer) to ELM327, then after pairring you will be able to get information from your car do the application.

The fact is neather iPhone nor iPad is able to pair with the ELM327 Bluetooth device.

When you go to, for example, in the iPhone settings, Bluetooth and search for the new bluetooth devices, the ELM327 is not identified at all, and it is not possible to pair. If I take the same steps with my Galaxy 5 Android 2.2 Phone, it imediately recognize the ELM327 device, pair with it, and I'm able collect data from the vehicle using any application compatible with OBD-II protocol.

On Board Diagnostics-OBD-II Protocol is used by most brands of car developers.

The amount of diagnostic information available via OBD has varied widely since the introduction in the early 1980s of on-board vehicle computers, which made OBD possible.

More information about this protocol you can see at: http://en.wikipedia.org/wiki/On-board_diagnostics

More information about ELM327 Bluetooth device can be found at: http://www.amazon.com/Soliport-Bluetooth-OBDII-Diagnostic-Scanner/dp/B004KL0I9I/ ref=pd_sxp_grid_pt_0_2

I hope made myself and other users question clear at this time.

Probably at the end of this, we will find that iPhone, iPad and other IOS devices are not compatible with ELM327 Bluetooth device; and my question will remain open, Why this is happen just with IOS?

Thank you so much for your help.

/Adriano

The ELM327 is a Bluetooth OBD-II Wireless Transceiver Dongle that you can plug into your car's OBD2 Port to read information from car's computer, engine and other stuff from vehicle.

Yes, I know what it is.

There is a lot of applications compatible with this device, for Windows, for Android, and some of then for IOS as well.

Then list the applications for iOS that specifically say that they support that device and that you're trying to us. We cannot help you if you do not provide this information and I don't understand why you keep ignoring that very specific question that you've been asked several times now.

Dear all,

Mr. Urban, Mr. Varjak Paw, Mr. KiltedTim good morning!

Gentlemen, excuse me, but the answer is much simpler than you want to make it appear: iPhone, iPad and most of Apple Bluetooth features are limited for some reazons that I don't agree, but it is what is it. I found my answer in another way, but I found!

Answering Mr. Varjak and Mr. KiltedTim, there is no app that support this device, because of lack Apple's Bluetooth technologie, there is no way to develop something witch will not work, don't you agree?

What I can't agree and understand, is why some "passive" bluetooth technologie can be blocked!

End of question, and from my point of view this case is closed. There is no discussion capable to solve this "problem".

Thanks a lot for you time and kindness.

/Adriano