After installing OS X 10.8.2 my Mac Pro with 32 Gb Ram freezes within 30 minutes invariably. Tried disconnecting all of the peripherals, unloaded Parallels 8, did a clean reload, quit all applications, nothing seems to make a difference. Would appreciate any additional ideas.
Mac Pro, OS X Mountain Lion (10.8.2)
What would you recommend for RAM? What is max?
http://macperformanceguide.com/Recommended-MacPro-Memory.html
http://support.apple.com/kb/HT4433
http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1333-memory
24 3x8GB or 32GB
http://forums.macrumors.com/showthread.php?t=1415666&highlight=w3680
http://ark.intel.com/Product.aspx?id=47917&processor=W3680&spec-codes=SLBV2
Excellent... just ordered
| 1 | 24GB (3x8GB) DDR3 ECC PC10600 1333MHz SDRAM ECC for Mac Pro 'Nehalem' & 'Westmer |
| 1 | "Intel Xeon W3680 Processor" |
Am I reading that I'll have to update firmware to install this? If so, before install or after?
I would read the thread I linked on cpu upgrade to learn the latest - seems some do the firmware to use 1333 and 6-core but may not be essential. Intel modifies their chips at times.
hope you lelft room in wallet for some storage goodies, one I think can really take it up a notch are pcie 6G Sonnet Pro card with 2x240GB SSDs for system or scratch - gets into serious money when you talk about 2x500GB but you also get into 1GB/sec territory too.
Old school SCSI and $2K just to get what one SSD does for $100!
OK... got the new processor, RAM, WD VR 1T hard drive, 256 SSD. The new memory worked great with equipment. Installed the processor, HD and SSD. Now it won't boot.
Red LED's next to Memory and white power switch LED blinks three times than pauses, then repeats.
Took the processor back out and the computer booted normal. I'm guessing the existing system is not yet compatible with the new processor.
Any ideas?
Well which processor? which revision? this is what people were using:
SLBV2
did you use the 5,1 firmware?
Change should be one thing at a time and insure that RAM is fine, then go to next item probably.
4,1 to 5,1 Firmware Update Question
http://forums.macrumors.com/showthread.php?t=1457999
Old processor is W3520
New one is W3680
Firmware is 4.1
I did check RAM, one stick at a time, and it checks out. I also ran it in the machine before attempting the processor upgrade. Took the HD and SSD out also.
Not sure where I can upgrade the firmware?
Found the link to the Flash Firmware Upgrade, installed it and now all of the 'new stuff' works very well. Thanks for all your help The Hatter!
Mac Pro with updated OSX 10.8.2 freezes no matter what.
