1 2 3 Previous Next 35 Replies Latest reply: Jan 26, 2013 2:06 PM by steve626
rlh0009 Level 1 Level 1 (0 points)

Running OSX 10.5.8

Followed Superduper instructions , first partitioning a new 1TB external  using GUID and extended journaled format, then doing earase and copy all application of superduper.

But when i try to use the external to boot I get error message  panic "unable to find drive for this platform\ACPI\...."

 

Updated all software.

 

Attempted Carbon Copy before Superduper and was unable to create a bootable external hard drive.

 

Please help. Thank you in advance~


MacBook, Mac OS X (10.5.8)
  • 1. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    Kappy Level 10 Level 10 (226,795 points)

    Clone using Restore Option of Disk Utility

     

      1. Open Disk Utility in the Utilities folder.

      2. Select the destination volume from the left side list.

      3. Click on the Restore tab in the DU main window.

      4. Select the destination volume from the left side list and drag it to the Destination

          entry field.

      5. Select the source volume from the left side list and drag it to the Source entry field.

      6. Double-check you got it right, then click on the Restore button.

     

    Destination means the external backup drive. Source means the internal startup drive.

     

    Drive Preparation

     

    1. Open Disk Utility in your Utilities folder.

     

    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.

     

    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

     

    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.

     

    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.

     

    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • 2. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    How will restore help correct a potential problem located in the source volume? The destination volume is new, formated, and partitioned properly. Please help me understand where you are going with this. Thank you in advance.

  • 3. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    Kappy Level 10 Level 10 (226,795 points)

    I'm not going anywhere. Just giving you an alternative way to clone a drive that is built-into OS X and does not rely on third-party software. It will not fix a problem with the source volume. If you have such a problem, however, you need to fix it before you clone the volume. I've read your original question but did not see any mention of a defective source/boot volume. You can give this a try:

     

    Repair the Hard Drive and Permissions

     

    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.

     

    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.


    Now, erase your external drive and try cloning again. See if that works. I would encourage you to use the tool that is part of Disk Utility, but if you want to use third-party tools you certainly can give them a try.

  • 4. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    Thank you for your help. Yeah, I do not know if there is a problem with the source volume. It starts up fine and to my knowledge no problems other than it is an older machine that needs backing up before catastrophic failure. Thus, I purchased an external hard drive and followed all the recommendations for formatting and partitioning . I have used both SD & CC and still cannot get the system to boot from the external hard drive. I attempted your fix with disk utility and received this error message-> "Restore Failure Could not restore file exists". I have spent days on this "easy" back up solution. Thanks again for your help.

  • 5. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    Kappy Level 10 Level 10 (226,795 points)

    Then I would do the disk and permissions repair suggested. Then try cloning the source drive using Disk Utility. But this time boot from your Leopard DVD and follow this:

     

    Drive Preparation

     

    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.

     

    2. After Click on the Partition tab in the DU main window.

     

    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

     

    4. When it finishes erasing the drive follow the cloning procedure (you are still in Disk Utility):

     

      1. Select the destination volume from the left side list.

      2. Click on the Restore tab in the DU main window.

      3. Select the destination volume from the left side list and drag it to the Destination

          entry field.

      4. Select the source volume from the left side list and drag it to the Source entry field.

      5. Double-check you got it right, then click on the Restore button.

    Destination means the external backup drive. Source means the internal startup drive.


    Now see if it works.

  • 6. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    I started the restore of the MacBook HD to the external HD and I will report back with results. The estimated time until completion is 5 hours. Thank you again for your help and I do hope this works. Have a great evening~

  • 7. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    Well the pinwheel is still spinning and the estimated time remains at 6 hours with very little progress noted on the blue progress bar. I am concerned that something has happened/stuck/crashed etc. The faint rattling sound that is coming from the MacBook is troubling. Your thoughts? Thank you in advance.

  • 8. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    Kappy Level 10 Level 10 (226,795 points)

    Rattling sounds are not good. Could be a sign of the drive failing.

  • 9. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    That was what I was thinking as well. Is there a way to confirm progress without stopping the restore?

  • 10. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    Kappy Level 10 Level 10 (226,795 points)

    Not really. Only the progress bar shows any evidence of something going on. It sure doesn't seem that anything is going on. If there are drive lights blinking to show read/write activity you'd know more directly, but that's probably not the case except on the external drive's enclosure. If there is no light activity, then the restore has died.

  • 11. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    Suggestions? Start it over? Thanks again.

  • 12. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    Do I try again to boot from install disk and then run the restore as you suggested earlier? Thanks

  • 13. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    Kappy Level 10 Level 10 (226,795 points)

    I suppose so. Don't really know what more to do since cloning a disk can only be done one way - using a backup utility of some sort.

     

    Out of curiosity are you at all able to drag a file from the disk to the backup?

  • 14. Re: Running OSX 10.5.8 but cannot boot from Superduper copy on external HD
    rlh0009 Level 1 Level 1 (0 points)

    I will force shut down and then try to drag and drop. Thanks

1 2 3 Previous Next