Mavericks corrupts external hard drive

My WD MyBook studio 2TB (fw800) suddenly shows up empty on my desktop after a Mavericks upfrade on my mid 2009 mbp.


Disk Drill is now scanning the WD, and the files are there, about 1,4 TB of it...


How do I get the disc structure back?


I have no Mountain Lion OS-mac to test the WD in..


I had a bootable Mountain Lion on the WD, could that be the problem?


In Disk Drill MyBook has four units; EFI(200Mb), MyBook(1,8Tb), Unallocated 128Mb and Lost partition (200Mb)

iOS 7, Ipad mini + ios7

Posted on Oct 24, 2013 1:08 AM

Reply
1,484 replies

Nov 5, 2013 8:27 AM in response to skgordon

Just to add my story. MacBook Air mid 2012. WD My Passport connected with USB When I mounted the drive it's directory was apparently erased in an instant and I was unable to access the contents of the drive. Connecting it on another Air running 10.8, it again failed to mount. However I ran disc utility, which recognised it, but failed to repair the disc. But after this the drive was mounted correctly and its contents accessible on the 10..8 machine. However it is no longer bootable. I was not using any of the WD utilities except the partition WD Smartware which mounts when you plug in the drive. No RAID or other complications this time. So there !

Nov 5, 2013 10:52 AM in response to skgordon

Oh that life were that simple !! That is only what happened to me. Yes the file structure and data seemed intact. The only problem was that the drive was not bootable. Disc utiility failed at "updating boot partitions"

Stay calm. Most problems are eventually solved but those who have lost large amount of data will be pleased to find a solution to what is doubtless a major problem.

Nov 5, 2013 12:35 PM in response to Trocafish

Just found this on the WD forum - maybe this helps others too:


After I discovered the problem, I disconnected all my drives and sent the WD software on my Mac to the trash, then waited for help or resolution. Then, last night, I received a call from a concerned help representative at WD. He asked me to plug in my WD MyBook Studio Edition for Mac to the USB port. I did so and the data was all there exactly as it should have been. We then tried it again via Firewire and the computer did not acknowledge it. The Rep told me that WD was working on a solution to the problem.


So, I plugged back in through the USB port and all was fine. Then I tried to back up the WD HD and could not (USB too slow I guess). So I turned the HD off and disconnected the power and the USB cable. Then I plugged in the firewire, then the power and low and behold, there it was along with all my data. So I backed up everything, and then shut down the computer, and tried restarting. The drive was still there.


Source: http://community.wd.com/t5/External-Drives-for-Mac/All-data-gone-on-My-Book-Stud io-II/td-p/602387/highlight/false/page/8

Nov 5, 2013 1:01 PM in response to Trocafish

Well, I got the call from WD support, but he didn´t do much other than ask a bunch of questions already discussed here in the forum. (remove WD software, wich I already had done, other checks and not much more)

Thanks to friends I got hold of Data Rescue 3 and a Seagate 3Tb to make a Recovery and a Clone of my affected disc, just in case.

So now it is just to sit and wait for a solution.

Nov 5, 2013 1:02 PM in response to skgordon

Gordon,


The recovery tool I used creates individual folders for each file type/extension, but yes, all of the files with the same extension were lumped together into the same folder.


Lightroom was able to import all of the photos from this one large folder and actually they seem to be ordered chronologically. I will need to move these to individual folders and re-organize the data.

Nov 5, 2013 1:13 PM in response to jsac88

Same story with Data Rescue 3. I got most of the data, But new file names ordered in folders named by their file extensions. Some of them I could discard easily, like icons and dmg's. But the images and my movies were watchable and I can rename them.


Images CRW, CR2 and jpg are more of a headache. I wish I could find the year created in the metadata, at least.


Does the EXIF get lost? (I hope not)


Is there an EXIF-reader for batch processing or something? I have about 700Gb of images to sort.

Nov 5, 2013 1:35 PM in response to Bosto

YAY: finally, kudos to 3 guys at Promise (Jerry, Stephen and Victor) (i hope, but everything seems to be working again, although i did lose all my older backups).


NUMBER ONE PROBLEM: MY IMAC DID NOT HAVE THE PROMISE UTILITY INSTALLED. I INSTALLED THAT FROM THEIR SITE DOWNLOAD CENTRE, BUT THEY ALSO SENT ME A LINK TO IT.


granted, they haven't quite released the fully-functional mavericks (osx 10.9) version yet, but the older one does work in command mode to get reports out of it.


AFTER THAT, IT WAS NOTED THAT MY FIRMWARE VERSION WAS OUT-OF-DATE, AND IT REQUIRES THE LATEST ONE TO WORK WITH MAVERICKS (PERMISSION ISSUES, SOMETHING I ALREADY SUSPECTED WAS HAPPENING BUT APPLE ERROR MESSAGES ARE GETTING TO BE LIKE MICROSOFT IT SEEMS)


NEXT ITEM, MAC USERS CAN'T DOWNLOAD THE FIRMWARE UPDATE FROM PROMISE AND EXPECT IT TO WORK, THE .IMG FILE THEY HAVE WON'T WORK UNDER MAVERICKS (APPLE'S NEW PROPRIETARY FILE FORMAT BS AGAIN I SUSPECT).


SO, YOU MUST-MUST-MUST HAVE THAT PROMISE UTILITY INSTALLED AND THEN 'CHECK FOR UPDATES'. THEN INSTALL THE UPDATE VIA THAT UTILITY. THE INSTRUCTIONS SAY TO POWER CYCLE YOUR PEGASUS OR REBOOT YOUR SYSTEM... YOU MUST-MUST-MUST DO BOTH.


THEN, GOD, DEMONS, AND OTHER ASSPORTED SAINTS AND PROPHETS (PROFITS?) PERMITTING, YOU'RE UP- AND-RUNNING AGAIN.


I SURE WISH THE **** SOMEONE HAD SAID ALL THIS A WEEK AGO INSTEAD OF 'OH YAH, WELL WE TESTED EVERYTHING AND OURS WORKS'


GET THE WORD OUT TO PROMISE USERS GUYS AND GALS... GET THAT PROMISE UTILITY AND DO YOUR DUE DILIGENCE!!!


AND IF YOU CAN'T GET THAT HD TO WORK... THEY WILL SEND YOU THEIR EMAIL ADDRESSES - THESE GUYS DO GET IT DONE (BUT ONLINE SUPPORT AT PROMISE.COM... PAH)

Nov 5, 2013 1:52 PM in response to Trocafish

Coppying data to a new drive now.


Drive had not been appearing at all in Mavericks.


I have a windows 7 install and bootcamped into it.


I installed MacDrive and the trial period ran out.


I booted into Windows with the Western Digital Mybook 2TB studio edition 2 attached by usb.


Got a windows prompt that it needed a driver update.


Updated drivers. Everything appeared in windows, but could not be copied over with MacDrive out of trial period.


Had a clean install of Mavericks with no WesternDigital software on it.


Rebooted into Mavericks, the drive appeared, the files appeared, and I am copying them over to another usb'd drive.


Hope this helps someone else. This has been a grizzly transition for me.

Nov 5, 2013 3:23 PM in response to AKabas

AKabas,


Initially when I tried to access the drive from Mavericks it made stuttering noises. After, perhaps, an hour the drive appeared but the files couldn't be accessed. It had its original name. Then, when I tried to reboot and access it subsequently, nothing appeared. No drive on the desktop, nor in the finder, or in disk utility.


Now the drive appears everywhere and I am transferring the files to another drive.

Nov 5, 2013 4:44 PM in response to Trocafish

i am able to recover files using Disk Drill - but as it was my 3tb seagate that was wiped - my iTunes library and personal compositions - it is not possible to sort and organise what Disk Drill spits out - as with all the recvoery programs they organise files into audio, movies...etc, and rename them. there are 80-90000 files.


My files are there - what is missing that the recovery progams cant recover, is the directory structures and file names. without this, I fear I have lost my music server and 6 years of work.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Mavericks corrupts external hard drive

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.