Iphone 6 ring/silent switch not working

I've had a similar experience. The silent switch on my iPhone6 would not stay in the silent position, it just would flip back up to ring mode. After careful inspection, it appeared to have some grit in the button. I used the point of a pin to scrape away in foreign material and a blow with some compressed air. The switch is working normally again. Just an alternative, before taking your phone to Apple, it might just be a bit dirty.

Thanks, I must of had a sand grain in the switch as I have been at the beach the last few days. I got a pen knife and moved the debris. The switch now goes back and forth as it should.

I HAVE A TEMPORARY FIX FOR THIS! I LOOKED THIS QUESTION UP DUE TO HAVINF THE SAME ISSUE AND FOUND THAT **IF I STICK A DEBIT CARD/ ID/ HARD PLASTIC CARD IN THE CRACK WHILE PUSHING IT TO THE WAY I WANT *which is on* IT WILL SWITCH 🙂 your welcome!

Similar issue. Silent/Ring button on left side of my iPhone 6 will not switch to silent mode. Taking into Apple today.

I have an iPhone 6, it's not even a year old yet and it's been playing up. The volume switch on the side (silent/non silent) won't work and the volume control also. I tried all the solutions mentioned but none have worked. Does anyone know if warranty would cover this?

redskiesblue wrote:

Does anyone know if warranty would cover this?

Whether or not it's covered by warranty depends on why it isn't working. Make an appointment at the Genius Bar at your local Apple Store for evaluation. Only Apple can give you the definitive answer to that question.

By the looks of it you're not alone nbarkson. I'm having the same issue with my iPhone 6 Plus at the moment only it is stuck off silent. I'm in the process of getting it replaced under warranty as Apple Technician has inspected and deemed it to be a hardware fault. In the meantime I have found that you can use the 'Assistive Touch' function of the phone which creates an on screen virtual home button which you can use to make changes to different settings (including mute/unmute) that would normally be done via the phones physical buttons. It can also be customised to have between 1-8 settings/functions that you would use regularly. Hope this helps.

The same is happened to mine, mute/silent button doesn't work anymore.

You need to go to general>accesibility and then all the way down to "accesibility shortcut" and then select AssistiveTouch. Then go to the homescreen, triple click the home button (it will open assistive touch, click it) select device and then unmute. And done! If you want to hide assistive touch triple click again.

Thank you! This solved my problem. The external mute button is still stuck but the virtual button serves the same purpose.

What if I don't have warrant?

I have a very similar issue. The switch on my iPhone 6 is hard to get into silent mode. I can get it there, but it seems like it's just barely holding on and will flick back to ring mode very easily.

I have had the same issue. iPhone 6 plus. I assumed the switch was bad and as I last ditch effort before selling the phone I fixed it by using a swab with a bit of alcohol and a pin. Cleaning got it to work, but it is still not working all the time reliably. So occasionally I flip it several times for it to work. I also used a magnifying glass to really see into that tiny switch. It also took flipping it on and off a lot as I was cleaning. The switch is bad if it is easily prone to getting dirt in it and failing.

Same problem here...just started 2 days from warranty expiring!

you have to go to the genius bar and replace the iPhone