How to back up Files on Disk Utility

My Mac Book Pro doesn't start. when I press the start button It chimes, apple logo, line loading and turns off. Once and again. I tried the Comand-option-P-R and nothing. Tried a lot of tricks I found online and nothing. Finally -And Im not sure how, I think it was the Comand-R opened the Disk Utility and could hit the repair the disk, It said that It couldn't repair -I have almost full capacity 499GB used- but cant remove files since I cant start the computer. Disk Utility told me to Back up Files and Restore -meaning it will wipe out the data, but i will have it on my back up- How do I back up using external hard drive. Thanks for any help.

MacBook Pro, Mac OS X (10.7)

Posted on Dec 1, 2014 5:08 PM

Reply
Question marked as ⚠️ Top-ranking reply

Posted on Dec 1, 2014 5:13 PM

Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility


Boot to the Recovery HD:


Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


1. Select Disk Utility from the main menu then press the Continue

button.

2. Select the destination volume from the left side list.

3. Click on the Restore tab in the DU main window.

4. Select the destination volume from the left side list and drag it

to the Destination entry field.

5. Select the source volume from the left side list and drag it to

the Source entry field.

6. Double-check you got it right, then click on the Restore button.


Destination means the external backup drive. Source means the internal startup drive.

Note that the above clone includes both your internal boot volume and the Recovery HD volume you used for the above. I suggest that the backup disk you use has a larger capacity than the one in your computer. That way you should be able to boot from this backup. Since the drive you have is 500 GBs then the external drive you use for the backup clone should be at least 750 GBs.

18 replies
Sort By: 

Jan 2, 2015 12:18 PM in response to Kappy

Sorry to bother you but I am doing a similar thing as above and need help.



So I followed the steps you mentioned. Source: Macintosh HD ... Destination: My Passport for Mac. It asked me if I wanted to erase the content on My passport for mac and I said yes. But then it says "Restore Failure: Source volume is read/write only and cannot be unmounted, so it can't be block copied". What does that mean?

Reply

Jan 15, 2017 3:24 PM in response to obarillas

The easiest way to recover your files from a Mac:

If you hard drive has failed on your IMac or apple laptop and is it not booting then Do This To Recover Your Files:


1. Put your device into Target Disk Mode. (You can enter Target Disk Mode by rebooting your Mac and holding down the T key as it boots)

2. Connect your Mac via a Firewire or Thunderbolt cable to another Mac (lets call it the Second Mac)

3. Open Finder in the Second Mac,

4. Look for the First Mac’s “Macintosh HD” under Devices and click on it to open it

5. Located the “Users” folder, Your files and documents are under “Users” folder

6. Drag them to another location in you Second Mac.

7. You have now recovered your documents.

8. Disconnect the First Mac and take it to an apple store where they will charge you $200-$300 to change the hard drive.

9. Back up your files on the Second Mac



Macs can boot into a “Target Disk Mode” that causes them to function like an external hard drive. Connect one Mac to another Mac and you can access its files in the Finder.


Target Disk Mode works with Macs, so you’ll need two Macs for this. Each Mac needs either a Thunderbolt port or a Firewire port.


While in Target Disk Mode, your Mac will act as an external drive and appear in the Finder on your other Mac.


All its internal partitions will appear if it has multiple partitions.


Look for an external drive named “Macintosh HD.” You can click the drive and copy files back and forth like you would with a normal external drive.

Reply

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

How to back up Files on Disk Utility

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.