No Audio ( Bootcamp )

Joathan wrote:

Good evening , I tried all the procedures that have been spoken , but my MBP 13 beginning in 2011 only installs windows 8 or 8.1 UEFI mode, the Bootcamp it restarts and is black screen and the MBP is like being turned off , however in my view it this caught , already waited more hours and not leave the black screen. created with the USB drivers , left plugged into the MBP as he restarted , took the test without the USB and all test always latch on the black screen. As I understand it , the audio drive does not work for that was installed using the UEFI mode, but I can not get him to install the windows without being in UEFI mode . someone could help me ? I wanted to turn the windows into my MBP necessity reasons. hesitate a secret q I can the boot without using the UEFI mode? Thank you ! Another detail , not in UEFI mode can not install windows 7. Sorry translating , I am Brazilian and I used google translator to help me 🙂 .

PT_BR:

Boa noite, tentei todos os procedimentos que aqui foram falados, porém meu MBP 13 inicio 2011 so instala windows 8 ou 8.1 em modo UEFI, pelo Bootcamp ele reinicia e fica tela preta e o MBP é como se estivesse desligado, porem no meu ver ele esta travado, ja esperei mais de horas e nao sai da tela preta. criei o USB com os drivers, deixei plugado no MBP enquanto ele reiniciava, fiz o teste sem o USB e em todos os teste sempre trava na tela preta. Pelo que entendi, o drive de audio nao funciona por que foi instalado usando o modo UEFI, mas nao consigo fazer com que ele instale o windows sem ser no modo UEFI. alguem poderia me ajudar ? queria muito rodar o windows dentro do meu MBP por motivos de necessidade. exite algum segredo q eu possa da boot sem usar o modo UEFI? Obrigado! Outro detalhe, nem em modo UEFI consigo instalar o windows 7. Desculpe a traduçao, sou brasileiro e usei o google tradutor para me ajudar :).

1. Did you modify the Bootcamp info.plist to create a USB?

2. If the option to create a USB was there normally, you must use a USB2 flash drive. A USB3 flash drive will not work.

3. Your Mac does not support EFI Boot. It is a preUEFI machine.

1. Where can I change this file ? I do not shifted in anything like that. I have to change it, and by what ?

2. I created a USB with the bootcamp drivers q he requested a drive to save the drivers.

I think my pendriver is 1.0 or at most 2.0, 3.0, I 'm sure it is not .

3. I came to this conclusion after reading your topic and now confirming that it is not UEFI !

However , is there any way to install any version of windows ?

PT_BR:

1. Onde que eu posso alterar esse arquivo? eu nao mexi em nada do tipo. Tenho que alterar ele e por o que?

2. eu criei uma USB com os drivers do bootcamp q ele solicitou uma unidade para salvar os drivers.

Acredito que meu pendriver seja de 1.0 ou no maximo 2.0, 3.0 eu tenho certeza que ele nao é.

3. Cheguei a essa conclusão depois de ler seu topico e agora confirmando que ele não é UEFI!

Porem, existe alguma forma de instalar qualquer versao do windows?

1. If you did not change it, you do not need to change it. It is fine as it is. There a few 2011/2012 models, which support both DVD and USB installations.

2. This is how you can check if your USB is a USB2.0.

3. You can see the attached link for Windows versions supported on your Mac.

System requirements to install Windows on your Mac via Boot Camp - Apple Support

4. Do you have any unknown devices on Windows Device Manager? These will have a yellow triangle and an exclamation mark.

I apologize for hijacking this post!

Loner T,

I am new to this forum and am trying to install windows 8 on my Macbook 5.1.I see you are very experienced with this but can't figure out how to message you privately. I will give good ratings, could you pleasehelp me out? Please let me know if i should start a thread or something.

Thanks

1. I managed to install Windows by using the DVD-boot mode: Efi Boot , just so I could install windows .

2.

3. Yes, the reported link, my mac supports w7 , w8 and Vista. but as I said, only installs using Efi boot . otherwise , the screen goes black and not the boot .

4. Exactly, after installing windows in the device manager were the yellow triangle and an exclamation point in the audio driver.

PT_BR:

1. Eu consegui Instalar o Windows usando o Modo de inicialização do DVD: Efi Boot, Só Assim que consegui Instalar windows.

2.

3. Sim , no link informado, o meu mac suporta w7, w8 e Vista. mas como falei, só instala usando o Efi boot. fora isso, a tela fica preta e nao da boot.

4. Exatamente, apos instalar o windows, no gerenciador de dispositivos ficaram os triangulo amarelo e um ponto de exclamação no driver de audio.

Tanks..

Treewilly wrote:

I am new to this forum and am trying to install windows 8 on my Macbook 5.1.I see you are very experienced with this but can't figure out how to message you privately. I will give good ratings, could you pleasehelp me out? Please let me know if i should start a thread or something.

Thanks

Please start a new thread in the Bootcamp discussions. I am willing to accept the bribe of good ratings. 😁 (seriously, this is not about ratings)

EFI boot on your machine will cause problems. The black screen should be addressed first. Did you check if your USB is a USB2 device?

According to MacBook Pro (13-inch, Early 2011) - Technical Specifications your Mac has a DVD drive. Is it possible to remove the current Windows installation, and use Bootcamp Assistant and use the DVD and re-install Windows without using EFI Boot? NC drivers can be installed after Windows is fully installed.

As he promised , I tried to use bootcamp to install windows 7 64bit versions , 8 64bit and 64bit 8.1 , in all installation attempts using the bootcamp and the DVD MBP Driver , when you restart the screen is black and not boots installation. I created the pendriver with bootcamp drivers and already used pendriver USB 1.0 and USB 2.0. I not created a pendriver not windows installation, this pendriver just with the bootcamp drivers. I'm no expert , but I believe after it was made ​​an upgrade from Fireware the MBP , it was so. is there any way to downgrade the FireWire ? I do not know what else to do , already I tried everything and whenever the boot using DVD, is black screen ! detail , I can install Debian without any problems , all the macbook is including sound, on Debian it runs quiet. I appreciate the help!

PT_BR:

Como tinha falado, eu tentei usar o bootcamp para instalar as versoes do windows 7 64bits, 8 64bits e 8.1 64bits, em todas as tentativas de instalação usando o bootcamp e o Driver DVD do MBP, ao reiniciar a tela fica preta e nao inicializa a instalação. Eu criei o pendriver com os drivers do bootcamp e ja usei pendriver de USB 1.0 e de USB 2.0. não criei um pendriver para instalação do windows não, esse pendriver só é com os drivers do bootcamp. não sou nenhum especialista, mas acredito que depois que foi feita uma atualização do Fireware do MBP, ele ficou assim. existe alguma maneira de fazer o downgrade do fireware? não sei mais o que fazer, ja tentei de tudo e sempre que da boot usando DVD, fica tela preta! detalhe, consigo instalar o Debian sem problemas nenhum, tudo que o macbook tem inclusive o som, no Debian ele roda tranquilo. Agradeço pela ajuda!

1. Disconnect all external storage, and any other disk drives. You should only have the Mac.

2. Insert your DVD.

3. Run Bootcamp Assistant.

4. If it asks for a USB, insert a USB2 flash drive. Firewire will not be recognized.

5. Partition your internal disk.

6. Do not interrupt the installation. Do not use the Alt/Option key.

7. Do you still get a black screen?

Yes! Following these steps , made ​​exactly as described, after the bootcamp is the disk partition , it automatically restarts correct! then that's where my drama begins! in every video I see on youtube and procedures that do, are exactly followed to the letter . follow the bootcamp manual, and always happens this black screen ! already tried one assistance , but unfortunately in the city where I live we do not have technical assistance from apple .

PT_BR:

Sim! após essas etapas, exatamente feita como descrito, depois que o bootcamp faz a partição do disco, ele automaticamente reinicia correto! então, é ai que o meu drama começa! em todos os vídeo que vejo no youtube e os procedimentos que faço, são exatamente seguidos a risca. segui o manual do bootcamp, e sempre acontece essa tela preta! já tentei uma assistência, mas infelizmente na cidade onde moro não temos assistência técnica da apple.

When you are in OS X, is there a Bootcamp volume in Finder? It may not be there, but we should check.

If you are using a DVD, can you see files on the DVD in Finder? If you right click on the DVD and click on Get Info, what is the format of the DVD?

R- Yes , there is a partition with BOOTCAMP name.

R- Yes , I can see the DVD files .

R- It is written : UDF ( Universal Disk Format ) .

PT_BR:

R- Sim, existe uma partição com o nome BOOTCAMP.

R- Sim, consigo ver os arquivos do DVD.

R- Esta escrito: UDF (Formato de Disco Universal).

Can you check if any of the following logs exist in your Bootcamp volume?

find /Volumes/BOOTCAMP/Windows/ -name "setup*.log" -print

/Volumes/BOOTCAMP/Windows//Inf/setupapi.dev.log

/Volumes/BOOTCAMP/Windows//Inf/setupapi.offline.log

/Volumes/BOOTCAMP/Windows//Inf/setupapi.setup.log

/Volumes/BOOTCAMP/Windows//Logs/SetupCleanupTask/setupact.log

/Volumes/BOOTCAMP/Windows//Logs/SetupCleanupTask/setuperr.log

/Volumes/BOOTCAMP/Windows//Panther/FastCleanup/setupact.log

/Volumes/BOOTCAMP/Windows//Panther/FastCleanup/setuperr.log

/Volumes/BOOTCAMP/Windows//Panther/setupact.log

/Volumes/BOOTCAMP/Windows//Panther/setuperr.log

/Volumes/BOOTCAMP/Windows//Panther/UnattendGC/setupact.log

/Volumes/BOOTCAMP/Windows//Panther/UnattendGC/setuperr.log

/Volumes/BOOTCAMP/Windows//setupact.log

/Volumes/BOOTCAMP/Windows//setuperr.log

/Volumes/BOOTCAMP/Windows//System32/Sysprep/Panther/IE/setupact.log

/Volumes/BOOTCAMP/Windows//System32/Sysprep/Panther/IE/setuperr.log

Sorry my absence, after Test bootcam All versions of how to make mac OSX (Leopard , Lion, Mountain Lion , Maverick , Yousemite ) , shortly after partitioning and the resumption made ​​by own bootcamp , the MBP just get the black screen and nothing happens !!! Tested with all the above mentioned versions . When running in all versoses the command " / Volumes / BOOTCAMP / Windows / " Do not have a file if you want ! entodas attempts partition is empty !

PT_BR:

Desculpe Minha ausencia , apos Testar o bootcam de Todas versões como fazer mac OSX (Leopard , Leão, leão de montanha , Maverick , Yousemite ) , logo apos o particionamento e o reinicio feitos pelo proprio bootcamp , o MBP simplesmente fica com a tela preta e nada acontece!!! Testei com todas as versoes acima citadas . Ao executar em todas as versoses o comando "/ Volumes /BOOTCAMP/Windows/ " Não tem um arquivo se quer! entodas as tentativas a partição encontra-se vazia!

Can you check if your DVD can start the Windows installer on a Windows PC?

1. Back up OSX using Time Machine - Mac Basics: Time Machine backs up your Mac - Apple Support.

2. Boot into Internet Recovery - OS X: About OS X Recovery - Apple Support.

3. Erase your internal drive and restore from the TM backup in Step 1 - OS X Yosemite: Recover your entire system.

Please be aware that TM does not backup Bootcamp partitions. Once OS X is restored

Resetting the System Management Controller (SMC) on your Mac - Apple Support

How to Reset NVRAM on your Mac - Apple Support

Now test the BCA procedure. Please do not interrupt the process, just follow it.