iMac running very slowly - please help!

Question

iMac running very slowly - please help!

Hi.

I have a mid-2011 iMac 27-inch, with 12Gb ram, with 582GB used of a 1TB capacity.

It is incredibly slow to boot, and often takes ages to do tasks that ought to happen in seconds.

I frequently repair disk permissions, and its software is all up to date.

I occasionally glance at Console, and often see huge lists of repeated issues there but I don't know how to fix them.

For example, this morning, I have the following message 1000s of times:

21/03/2015 08:10:22.818 JavaApplicationStub[448]: AppleEvents: Send port for process has no send right, port=( port:287831/0x46457 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.root.default-qos.overcommit

I have this 100s of times:

21/03/2015 08:28:24.275 storeaccountd[406]: AccountServiceDelegate: Accepting new connection <NSXPCConnection: 0x7ffc196ee390> connection from pid 3858 with interface <AccountServiceInterface: 0x7ffc196ee650> (PID 3858)

100s of these:

21/03/2015 08:34:12.000 kernel[0]: BUG in process suhelperd[268]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

and a load of other stuff.

I'm sure some of the errors are due to programs I haven't properly uninstalled as I can see their names mentioned but I know I don't have them any more.

Can anyone suggest anything I can do to clear things up?

Thanks!

iMac (27-inch Mid 2011)

Posted on Mar 21, 2015 12:50 AM

Reply

Answer 1

SeaPapp

Level 7

26,492 points

Mar 21, 2015 4:57 AM in response to staticmouse69

Start up from your recovery partition, Command-R and run Disk Utility to repair the hard drive, not the permissions. Check the Smart Status of the hard drive while in Disk Utility.

Try a Safe Boot to see if that helps OS X: What is Safe Boot, Safe Mode? - Apple Support

Run The Apple Hardware Test Using Apple Hardware Test - Apple Support

Post an EtreCheck report so we can see whats installed http://www.etresoft.com/etrecheck

Reply

Answer 2

Linc Davis

Level 10

209,739 points

Mar 21, 2015 6:02 AM in response to staticmouse69

If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the startup drive, or some other hardware component, is failing. That model was the subject of a recall program (now ended) for defective hard drives. Back up all data immediately, then make a "Genius" appointment at an Apple Store to have the machine tested.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

Reply

Answer 3

Mar 22, 2015 6:32 AM in response to SeaPapp

I followed the steps recommended by @Mike, and here's what happened:

I repaired the hard drive:

User uploaded file

I checked the SMART status. It was verified:

User uploaded file

Then I performed a Safe Boot, but it didn't seem to start up any faster.

I tried to run the Apple Hardware Test but it didn't work. I had a grey screen for a while, then the Apple logo appeared and it booted as normal. I tried three times, and each time it was the same.

And here is the EtreCheck report.

EtreCheck version: 2.1.8 (121)

Report generated 22 March 2015 14:21:00 CET

Download EtreCheck from http://etresoft.com/etrecheck

Click the [Click for support] links for help with non-Apple products.

Click the [Click for details] links for more information about that line.

Hardware Information: ℹ️

iMac (27-inch, Mid 2011) (Technical Specifications)

iMac - model: iMac12,2

1 3.1 GHz Intel Core i5 CPU: 4-core

12 GB RAM Upgradeable

BANK 0/DIMM0

2 GB DDR3 1333 MHz ok

BANK 1/DIMM0

2 GB DDR3 1333 MHz ok

BANK 0/DIMM1

4 GB DDR3 1333 MHz ok

BANK 1/DIMM1

4 GB DDR3 1333 MHz ok

Bluetooth: Old - Handoff/Airdrop2 not supported

Wireless: en1: 802.11 a/b/g/n

Video Information: ℹ️

AMD Radeon HD 6970M - VRAM: 1024 MB

iMac 2560 x 1440

SyncMaster 1680 x 1050 @ 60 Hz

System Software: ℹ️

OS X 10.10.2 (14C1514) - Time since boot: 0:11:8

Disk Information: ℹ️

WDC WD1001FALS-403AA0 disk0 : (1 TB)

EFI (disk0s1) <not mounted> : 210 MB

Macintosh HD (disk0s2) / : 999.35 GB (375.96 GB free)

Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB

OPTIARC DVD RW AD-5680H

USB Information: ℹ️

Apple, Inc. Keyboard Hub

Apple, Inc Apple Keyboard

Apple Internal Memory Card Reader

Apple Computer, Inc. IR Receiver

Apple Inc. MacBook Air SuperDrive

Apple Inc. iPhone

Apple Inc. BRCM2046 Hub

Apple Inc. Bluetooth USB Host Controller

Apple Inc. FaceTime HD Camera (Built-in)

Thunderbolt Information: ℹ️

Apple Inc. thunderbolt_bus

Gatekeeper: ℹ️

Mac App Store and identified developers

Kernel Extensions: ℹ️

/Library/Application Support/Roxio

[not loaded] com.roxio.TDIXController (1.6) [Click for support]

/Library/Application Support/VirtualBox

[loaded] org.virtualbox.kext.VBoxDrv (4.3.24) [Click for support]

[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.24) [Click for support]

[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.24) [Click for support]

[loaded] org.virtualbox.kext.VBoxUSB (4.3.24) [Click for support]

/Library/Application Support/Viscosity

[not loaded] com.viscosityvpn.Viscosity.tap (1.0) [Click for support]

[not loaded] com.viscosityvpn.Viscosity.tun (1.0) [Click for support]

/System/Library/Extensions

[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.0) [Click for support]

[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.0) [Click for support]

[not loaded] com.contourdesign.driver.shuttle (2.2) [Click for support]

[not loaded] com.markspace.driver.MissingSyncBlackBerry (132) [Click for support]

Startup Items: ℹ️

HP IO: Path: /Library/StartupItems/HP IO

Startup items are obsolete in OS X Yosemite

Launch Agents: ℹ️

[running] com.epson.epw.agent.plist [Click for support]

[running] net.culater.SIMBL.Agent.plist [Click for support]

Launch Daemons: ℹ️

[not loaded] com.80pct.asclean.plist [Click for support]

[loaded] com.adobe.fpsaud.plist [Click for support]

[running] com.cleverfiles.cfbackd.plist [Click for support]

[loaded] com.microsoft.office.licensing.helper.plist [Click for support]

[running] com.sec.faxdb.plist [Click for support]

[running] com.smithmicro.schedulerdaemon.plist [Click for support]

[loaded] com.sparklabs.ViscosityHelper.plist [Click for support]

[not loaded] org.eyebeam.SelfControl.plist [Click for support]

[not loaded] org.virtualbox.startup.plist [Click for support]

User Launch Agents: ℹ️

[loaded] com.adobe.ARM.[...].plist [Click for support]

[running] com.amazon.cloud-player.plist [Click for support]

[loaded] com.google.keystone.agent.plist [Click for support]

[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Click for support]

[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Click for support]

[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Click for support]

[running] com.nchsoftware.expressaccounts.agent.plist [Click for support]

[running] com.nchsoftware.expressinvoicefr.agent.plist [Click for support]

[running] com.smithmicro.cleaning.schedulermailer.plist [Click for support]

[running] com.spotify.webhelper.plist [Click for support]

[not loaded] com.victorpimentel.TVShowsHelper.plist [Click for support]

[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]

User Login Items: ℹ️

iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

Garmin Express Service UNKNOWN (missing value)

Dropbox Application (/Applications/Dropbox.app)

COGILOG Startup UNKNOWN (missing value)

Viscosity UNKNOWN (missing value)

ExpanderDaemon Application (/Applications/Utilities/StuffIt 12/StuffIt Expander.app/Contents/MacOS/ExpanderDaemon.app)

COGILOG Startup UNKNOWN (missing value)

Catch Application (/Users/[redacted]/Downloads/Catch.app)

Internet Plug-ins: ℹ️

Default Browser: Version: 600 - SDK 10.10

Flip4Mac WMV Plugin: Version: 3.0.0.126 - SDK 10.8 [Click for support]

OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]

AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]

FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]

Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]

Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]

QuickTime Plugin: Version: 7.7.3

iPhotoPhotocast: Version: 7.0 - SDK 10.8

SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]

AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]

GarminGpsControl: Version: 4.1.0.0 Release - SDK 10.7 [Click for support]

JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version

User internet Plug-ins: ℹ️

Unity Web Player: Version: UnityPlayer version 2.5.5f1 [Click for support]

Aspera Web 3.4.2.90351: Version: Unknown - SDK 10.6 [Click for support]

Unity Player: Version: UnityPlayer version 1.5.0 [Click for support]

Safari Extensions: ℹ️

AdBlock

Add To Amazon Wish List

Duplicate Tab Button

Translate

3rd Party Preference Panes: ℹ️

RCDefaultApp

Déjà Vu [Click for support]

Flash Player [Click for support]

Flip4Mac WMV [Click for support]

MacFUSE [Click for support]

Perian [Click for support]

TVShows [Click for support]

Time Machine: ℹ️

Skip System Files: NO

Mobile backups: OFF

Auto backup: YES

Volumes being backed up:

Macintosh HD: Disk size: 999.35 GB Disk used: 623.39 GB

Destinations:

Anna McQueen's Time Capsule [Network]

Total size: 497.62 GB

Total number of backups: 25

Oldest backup: 2015-03-19 08:12:56 +0000

Last backup: 2015-03-22 11:14:26 +0000

Size of backup disk: Too small

Backup size 497.62 GB < (Disk used 623.39 GB X 3)

Top Processes by CPU: ℹ️

18% Mail

10% iPhoto

2% com.apple.MediaLibraryService

2% WindowServer

1% Safari

Top Processes by Memory: ℹ️

1.77 GB Image Capture Extension

706 MB iPhoto

387 MB Safari

296 MB com.apple.MediaLibraryService

258 MB iTunes

Virtual Memory Information: ℹ️

2.11 GB Free RAM

5.69 GB Active RAM

3.73 GB Inactive RAM

1.35 GB Wired RAM

2.02 GB Page-ins

0 B Page-outs

Diagnostics Information: ℹ️

Mar 22, 2015, 01:42:37 PM /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-22-134237_[redacted].crash

Mar 21, 2015, 09:38:29 AM /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-21-093829_[redacted].crash

Mar 19, 2015, 09:09:37 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_20 15-03-19-210937_[redacted].crash

Mar 22, 2015, 02:13:10 PM /Library/Logs/DiagnosticReports/WhatSize_2015-03-22-141310_[redacted].hang

Mar 22, 2015, 01:57:16 PM Self test - passed

Mar 22, 2015, 01:47:46 PM /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-22-134746_[redacted].crash

Mar 21, 2015, 08:29:14 AM /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-21-082914_[redacted].crash

Mar 20, 2015, 09:01:16 AM /Users/[redacted]/Library/Logs/DiagnosticReports/SIMBL Agent_2015-03-20-090116_[redacted].crash

Reply

Answer 4

Mar 22, 2015 6:32 AM in response to Linc Davis

@Linc, all my data is backed up to a Time Capsule, but I live 250km from the nearest Apple Store which poses a bit of a problem.

In terms of changes, let me give you some more details:

My iMac been really slow to boot for ages. But the rest of the time, it's not really a problem. When I say "really slow", it takes about 20 minutes to complete start up after I put in my password and before I can use it without endless waiting and spinning wheels. But I've been managing mainly by not rebooting very often!

Then last week, I needed to install a virtual machine on my iMac to run an accounting program on Windows. I needed to back this programme up to my Dropbox, but it was full. So in order to free up some space, I tried to run Whatsize to check for any big files I could delete. I upgraded to the latest version of Whatsize, but it was just so incredibly slow to measure the HD - I never even got it to complete a measure - so I contacted them to see if they could help.

They gave me a support utility so they could see what was happening, and from the results, said:

"You computer is struggling really bad

I am not sure what happened, but smth is not right

basically it is using a lot more memory than what you got"

So here I am.

Reply

Answer 5

SeaPapp

Level 7

26,492 points

Mar 22, 2015 6:51 AM in response to staticmouse69

Uninstall CleanMyMac, restart and see if things improve http://macpaw.com/support/cleanmymac/knowledgebase/how-to-uninstall-cleanmymac-2

Reply

Answer 6

Mar 22, 2015 6:56 AM in response to SeaPapp

That's very odd because after the first EtreCheck, I saw lots of references to that ****** program, so I had to download it again and get it to uninstall itself.

Then I did a second EtreCheck and that's what I uploaded.

How can I do it again??

Reply

Answer 7

Linc Davis

Level 10

209,739 points

Mar 22, 2015 7:16 AM in response to staticmouse69

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.

Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a summary of what you need to do, if you choose to proceed:

☞ Copy a line of text in this window to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.

5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.

You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.

Triple-click anywhere in the line of text below on this page to select it:

PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1301 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 475 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n ...and %s more line(s)\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { if(a[2]) next;split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|succ|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|s ful|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*{,/*} .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} '~ "kMDItemKind=Package"' '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0; };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 38;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5

Copy the selected text to the Clipboard by pressing the key combination command-C.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:

[Process started]

Part 1 of 8 done at … sec
…
Part 8 of 8 done at … sec

The test results are on the Clipboard.

Please close this window.

[Process completed]

The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.

Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.

12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.

______________________________________________________________

Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Reply

Answer 8

Mar 22, 2015 8:54 AM in response to Linc Davis

Start time: 16:25:10 03/22/15

Revision: 1301

Model Identifier: iMac12,2

System Version: OS X 10.10.2 (14C1514)

Kernel Version: Darwin 14.1.0

Time since boot: 1:14

UID: 501

Graphics/Displays

AMD Radeon HD 6970M

iMac (Main)

SyncMaster

SerialATA

WDC WD1001FALS-403AA0

USB

USB 2.0 Hub (TERMINUS TECHNOLOGY INC.)

Bluetooth

Apple Magic Mouse

Energy (lifetime)

kernel_task (UID 0): 10.90

Terminal (UID 501): 10.77

Energy (sampled)

WindowServer (UID 88): 10.76

Memory (MB)

kernel_task (UID 0): 1062

Font issues: 3

Nets

en0 192.168.1

en1 192.168.3

Listeners

cupsd: ipp

kdc: kerberos

launchd: afpovertcp

System caches/logs

2.8 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data

Diagnostic reports

2015-02-21 SIMBL Agent crash

2015-02-25 garcon crash

2015-02-26 SIMBL Agent crash

2015-02-26 garcon crash

2015-02-27 Ciel Compta libérale crash

2015-02-27 Microsoft Excel hang

2015-02-27 SIMBL Agent crash

2015-03-06 SIMBL Agent crash

2015-03-10 Ciel Compta libérale crash

2015-03-10 SIMBL Agent crash

2015-03-10 com.apple.WebKit.WebContent hang x4

2015-03-12 Preview hang

2015-03-12 garcon crash

2015-03-13 Microsoft Word hang

2015-03-13 SIMBL Agent crash x2

2015-03-14 SIMBL Agent crash

2015-03-15 SIMBL Agent crash

2015-03-17 garcon crash

2015-03-19 Ciel Compta libérale crash

2015-03-20 SIMBL Agent crash

2015-03-20 com.apple.WebKit.Networking crash

2015-03-22 SIMBL Agent crash x4

2015-03-22 WhatSize hang

HCI errors

Bus: 0xfa Addr: 6 Errors: 18

USB

USB Hi-Speed Bus

Host Controller Location: Built-in USB

Host Controller Driver: AppleUSBEHCI

Bus Number: 0xfa

FaceTime HD Camera (Built-in)

Location ID: 0xfa200000 / 3

Current Available (mA): 500

Current Required (mA): 500

Built-In: Yes

Hub

Location ID: 0xfa100000 / 2

Current Available (mA): 500

Current Required (mA): 2

Built-In: Yes

USB 2.0 Hub

Location ID: 0xfa130000 / 6

Current Available (mA): 500

Current Required (mA): 100

Apple USB SuperDrive

Location ID: 0xfa120000 / 5

Current Available (mA): 500

Current Required (mA): 500

Extra Operating Current (mA): 600

BRCM2046 Hub

Location ID: 0xfa110000 / 4

Current Available (mA): 500

Current Required (mA): 0

Built-In: Yes

Bluetooth USB Host Controller

Location ID: 0xfa111000 / 7

Current Available (mA): 500

Current Required (mA): 0

Built-In: Yes

USB Hi-Speed Bus

Host Controller Location: Built-in USB

Host Controller Driver: AppleUSBEHCI

Bus Number: 0xfd

Hub

Location ID: 0xfd100000 / 2

Current Available (mA): 500

Current Required (mA): 2

Built-In: Yes

Keyboard Hub

Location ID: 0xfd140000 / 5

Current Available (mA): 500

Current Required (mA): 300

Apple Keyboard

Location ID: 0xfd142000 / 6

Current Available (mA): 100

Current Required (mA): 20

IR Receiver

Location ID: 0xfd120000 / 4

Current Available (mA): 500

Current Required (mA): 100

Built-In: Yes

Internal Memory Card Reader

Location ID: 0xfd110000 / 3

Current Available (mA): 500

Current Required (mA): 500

Built-In: Yes

HID errors: 9

Kernel log

Mar 22 13:14:54 VBoxDrv: Failed to open kernel symbols, rc=-102

Mar 22 13:16:29 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild

Mar 22 13:19:47 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)

Mar 22 13:20:15 rtR0InitNative: warning! failed to resolve special kernel symbols

Mar 22 13:20:15 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.

Mar 22 13:20:15 VBoxDrv: Failed to open kernel symbols, rc=-102

Mar 22 13:20:17 utun_start: ifnet_disable_output returned error 12

Mar 22 13:22:13 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)

Mar 22 13:22:42 rtR0InitNative: warning! failed to resolve special kernel symbols

Mar 22 13:22:42 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.

Mar 22 13:22:42 VBoxDrv: Failed to open kernel symbols, rc=-102

Mar 22 13:22:45 utun_start: ifnet_disable_output returned error 12

Mar 22 13:24:34 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild

Mar 22 13:56:24 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff80461b23d8

Mar 22 13:57:49 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)

Mar 22 13:58:16 rtR0InitNative: warning! failed to resolve special kernel symbols

Mar 22 13:58:16 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.

Mar 22 13:58:16 VBoxDrv: Failed to open kernel symbols, rc=-102

Mar 22 13:58:17 utun_start: ifnet_disable_output returned error 12

Mar 22 15:12:03 ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)

Mar 22 15:12:31 rtR0InitNative: warning! failed to resolve special kernel symbols

Mar 22 15:12:31 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.

Mar 22 15:12:31 VBoxDrv: Failed to open kernel symbols, rc=-102

Mar 22 15:12:35 utun_start: ifnet_disable_output returned error 12

Mar 22 16:22:42 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff802c2803d8

System log

Mar 22 16:14:40 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:14:42 Safari: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 16:14:42 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:14:42 QuickTime Player: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 16:14:42 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:17:32 com.apple.backupd: Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/Time Machine Backups/Backups.backupdb/Anna's iMac (2)/2015-03-22-154423.inProgress/UUID

Mar 22 16:18:31 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:18:33 WhatSize: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 16:18:33 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:18:45 com.apple.backupd: Disk image already attached: /Volumes/Anna McQueen's Time Capsule/Anna's iMac (2).sparsebundle, DIHLDiskImageAttach returned: 35

Mar 22 16:21:14 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:21:18 WhatSize: CGImageCreate: invalid image colorspace: NULL.

Mar 22 16:21:19 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:21:25 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "WhatSize" for over 1.00 seconds. Server has re-enabled them.

Mar 22 16:22:05 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:22:05 WhatSize: CGImageCreate: invalid image colorspace: NULL.

Mar 22 16:22:05 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:24:40 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

Mar 22 16:24:42 Terminal: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 16:24:42 SIMBL Agent: AppleEvents: Send port for process has no send right, port=( port:33031/0x8107 rcv:1,send:0,d:0 limit:5) (findOrCreate()/AEMachUtils.cp #526) com.apple.main-thread

launchd log

Mar 17 10:52:09 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.Samsung.performOperations.plist, error = 2: No such file or directory

Mar 17 10:52:24 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.Samsung.performOperations.plist, error = 2: No such file or directory

Mar 17 10:53:01 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.Samsung.performOperations.plist, error = 2: No such file or directory

Mar 17 10:54:15 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.samsung.printerDriverInstaller.plist, error = 2: No such file or directory

Mar 17 11:03:19 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.Samsung.performOperations.plist, error = 2: No such file or directory

Mar 17 11:03:28 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.Samsung.performOperations.plist, error = 2: No such file or directory

Mar 17 11:03:54 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.Samsung.performOperations.plist, error = 2: No such file or directory

Mar 17 11:05:16 com.apple.xpc.launchd.domain.system: Could not read path: path = /Library/LaunchDaemons/com.samsung.printerDriverInstaller.plist, error = 2: No such file or directory

Mar 20 08:51:56 com.apple.xpc.launchd.domain.system: Could not parse plist: path = /Library/LaunchDaemons/com.80pct.asclean.plist, error = 109: Invalid property list

Mar 20 08:53:04 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.309, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 21 09:29:11 com.apple.xpc.launchd.user.501.100005.Aqua: Could not import service from caller: caller = otherbsd.304, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 22 13:04:19 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.305, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 22 13:15:17 com.apple.xpc.launchd.user.501.100008.Aqua: Could not import service from caller: caller = otherbsd.302, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 22 13:20:27 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.304, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 22 13:23:28 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.302, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 22 13:37:33 com.apple.xpc.launchd.domain.pid.Install Adobe Flash Player.648: Could not resolve origin of domain. XPC services in this domain's bundle will not be bootstrapped: error = 109: Invalid property list, taint = (null)

Mar 22 13:58:27 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.302, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Mar 22 15:02:30 com.apple.xpc.launchd.user.501.100006.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents/com.embercode.TVShowsHelper.plist, error = 2: No such file or directory

Mar 22 15:02:30 com.apple.xpc.launchd.user.501.100006.Aqua: Could not read path: path = /Users/USER/Library/LaunchAgents/net.sourceforge.tvshows.plist, error = 2: No such file or directory

Mar 22 16:12:09 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.392, service = com.fiplab.RSSBotLoginHelper, error = 119: Service is disabled

Console log

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 09:37:28 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 10:07:28 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 10:37:28 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 11:07:28 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 11:37:28 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 12:07:29 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 12:41:06 fontd: Failed to create font store at path /var/folders/cg/qn0qtqps50z91rmmfsgw4ds00000gn/C/com.apple.FontRegistry/fontreg istry.user, trying alternative

Mar 22 12:45:04 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 13:04:20 fontd: Failed to open read-only database, regenerating DB

Mar 22 13:39:51 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 13:51:38 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 14:17:37 osascript: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Mar 22 15:02:30 applet: Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:

/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper

Loaded kernel extensions

org.virtualbox.kext.VBoxDrv (4.3.24)

org.virtualbox.kext.VBoxNetAdp (4.3.24)

org.virtualbox.kext.VBoxNetFlt (4.3.24)

org.virtualbox.kext.VBoxUSB (4.3.24)

System services loaded

com.adobe.fpsaud

com.apple.Kerberos.kdc

- status: 1

com.apple.locationd

- status: 1

com.apple.watchdogd

com.cleverfiles.cfbackd

com.microsoft.office.licensing.helper

com.sec.faxdb

com.smithmicro.schedulerdaemon

com.sparklabs.ViscosityHelper

System services disabled

org.samba.winbindd

org.eyebeam.SelfControl

com.sfr.sfr3g

com.apple.mrt

Login services loaded

com.adobe.ARM.UUID

com.amazon.cloud-player

com.apple.mrt.uiagent

com.epson.epw.agent

com.google.keystone.user.agent

com.nchsoftware.expressaccounts.agent

com.nchsoftware.expressinvoicefr.agent

com.smithmicro.cleaning.schedulermailer

com.spotify.webhelper

net.culater.SIMBL.Agent

Login services disabled

com.macpaw.CleanMyMac.volumeWatcher

com.macpaw.CleanMyMac.trashSizeWatcher

com.apple.FTMonitor

org.eyebeam.SelfControl

com.apple.imagent.monaco

com.macpaw.CleanMyMac.helperTool

com.victorpimentel.TVShowsHelper

com.marketcircle.BPSyncHelper

com.iLike.Agent

User services disabled

com.macpaw.CleanMyMac.volumeWatcher

com.macpaw.CleanMyMac.trashSizeWatcher

com.apple.FTMonitor

org.eyebeam.SelfControl

com.apple.imagent.monaco

com.macpaw.CleanMyMac.helperTool

com.victorpimentel.TVShowsHelper

com.marketcircle.BPSyncHelper

com.iLike.Agent

Startup items

/Library/StartupItems/HP IO/HP IO

/Library/StartupItems/HP IO/StartupParameters.plist

User login items

iTunesHelper

- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app

Dropbox

- /Applications/Dropbox.app

ExpanderDaemon

- /Applications/Utilities/StuffIt 12/StuffIt Expander.app/Contents/MacOS/ExpanderDaemon.app

Catch

- /Users/USER/Downloads/Catch.app

Safari extensions

AdBlock

- com.betafish.adblockforsafari

Add To Amazon Wish List

- com.amazon.safari.wishlist

Duplicate Tab Button

- com.thiemo.safari.tabduplicator

Translate

- com.sidetree.Translate

Firefox extensions

Walnut for Firefox

Greasemonkey

Johan Sundström

Google Translator for Firefox

Amazon \Add to Wish List\ Button

Barre de Confiance CM-CIC

AvantGarde

Adblock Plus

All-in-One Sidebar

Red Cats (blue flavor)

FireFTP

eBay Sidebar

ReloadEvery

Widgets

pomodoro

iCloud errors

bird 21

cloudd 7

CallHistorySyncHelper 2

Safari 1

Continuity errors

sharingd 6

Restricted files: 196

Lockfiles: 27

Accessibility

Keyboard Zoom: On

Scroll Zoom: On

Contents of /Library/LaunchAgents/com.epson.epw.agent.plist

- mod date: Jun 17 00:00:00 2008

- checksum: 668685742

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>KeepAlive</key>

<dict>

<key>PathState</key>

<dict>

<key>/Library/Printers/EPSON/InkjetPrinter/EPW/IJEPWAgent.app</key>

<true/>

</dict>

<key>Label</key>

<string>com.epson.epw.agent</string>

<key>ProgramArguments</key>

<array>

<string>/Library/Printers/EPSON/InkjetPrinter/EPW/IJEPWAgent.app/Contents/MacOS /IJEPWAgent</string>

</array>

<key>RunAtLoad</key>

<true/>

</dict>

</plist>

Contents of /Library/LaunchAgents/net.culater.SIMBL.Agent.plist

- mod date: Dec 9 13:59:22 2010

- checksum: 1107421619

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>net.culater.SIMBL.Agent</string>

<key>Program</key>

<string>/Library/ScriptingAdditions/SIMBL.osax/Contents/Resources/SIMBL Agent.app/Contents/MacOS/SIMBL Agent</string>

<key>RunAtLoad</key>

<key>LimitLoadToSessionType</key>

<key>OnDemand</key>

</dict>

</plist>

Contents of /Library/LaunchDaemons/com.80pct.asclean.plist

- mod date: Mar 10 07:48:46 2014

- checksum: 1791717848

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.80pct.asclean</string>

<key>ProgramArguments</key>

<array>

<string>/private/var/asclean</string>

</array>

<key>UserName</key>

<key>GroupName</key>

<string>wheel</string>

<key>RunAtLoad</key>

<key>Debug</key>

</dict>

</plist>

Contents of /Library/LaunchDaemons/com.cleverfiles.cfbackd.plist

- mod date: Aug 4 17:51:14 2013

- checksum: 928112517

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist

PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"

"http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Disabled</key><false/>

<key>Label</key><string>com.cleverfiles.cfbackd</string>

<key>ProgramArguments</key>

<array>

<string>/Library/Application Support/CleverFiles/BackService.app/Contents/MacOS/cfbackd</string>

</array>

<key>OnDemand</key><false/>

</dict>

</plist>

Contents of /Library/LaunchDaemons/com.sec.faxdb.plist

- mod date: Mar 17 11:05:15 2015

- checksum: 3944748029

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>GroupName</key>

<string>wheel</string>

<key>Label</key>

<string>com.sec.faxdb</string>

<key>OnDemand</key>

<key>ProgramArguments</key>

<array>

<string>/Library/Printers/Samsung/Fax/FaxDB/faxdbd</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>ServiceDescription</key>

<string>Samsung Fax DB</string>

<key>UserName</key>

<key>ThrottleInterval</key>

<key>StandardOutPath</key>

<string>/Library/Logs/Samsung/MacFax/FaxDB.log</string>

<key>StandardErrorPath</key>

...and 5 more line(s)

Contents of /Library/LaunchDaemons/com.smithmicro.schedulerdaemon.plist

- mod date: Apr 7 15:41:41 2008

- checksum: 4089351027

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.smithmicro.schedulerdaemon</string>

<key>OnDemand</key>

<key>ProgramArguments</key>

<array>

<string>/Library/Smith Micro/Common/schedulerdaemon</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>UserName</key>

</dict>

</plist>

Contents of /Library/LaunchDaemons/com.sparklabs.ViscosityHelper.plist

- mod date: Oct 16 09:43:57 2014

- checksum: 1039347562

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.sparklabs.ViscosityHelper</string>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/com.sparklabs.ViscosityHelper</string>

</array>

<key>Sockets</key>

<dict>

<key>MasterSocket</key>

<dict>

<key>SockFamily</key>

<key>SockPathMode</key>

<key>SockPathName</key>

<string>/var/run/com.sparklabs.ViscosityHelper.socket</string>

<key>SockType</key>

<string>Stream</string>

</dict>

...and 1 more line(s)

Contents of /Library/LaunchDaemons/org.eyebeam.SelfControl.plist

- mod date: Oct 12 15:01:57 2014

- checksum: 1559827522

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>org.eyebeam.SelfControl</string>

<key>Disabled</key>

<true/>

<key>StartInterval</key>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/org.eyebeam.SelfControl</string>

<string>--checkup</string>

</array>

</dict>

</plist>

Contents of /Library/LaunchDaemons/org.virtualbox.startup.plist

- mod date: Mar 11 15:39:40 2015

- checksum: 3094394405

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key> <string>org.virtualbox.startup</string>

<key>Disabled</key> <false/>

<key>RunAtLoad</key> <true/>

<key>KeepAlive</key> <false/>

<key>LaunchOnlyOnce</key> <true/>

<key>ProgramArguments</key>

<array>

<string>/Library/Application Support/VirtualBox/LaunchDaemons/VirtualBoxStartup.sh</string>

<string>restart</string>

</array>

</dict>

</plist>

Contents of /private/etc/crontab

- mod date: Feb 10 09:35:12 2008

- checksum: 795173808

[N/A]

Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist

- mod date: Feb 3 18:37:59 2015

- checksum: 394026997

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.adobe.ARM.UUID</string>

<key>ProgramArguments</key>

<array>

<string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>StartInterval</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist

- mod date: Nov 17 09:56:48 2009

- checksum: 366865046

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.adobe.ARM.UUID</string>

<key>ProgramArguments</key>

<array>

<string>/Applications/Adobe Reader 8_/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>StartInterval</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.amazon.cloud-player.plist

- mod date: Mar 9 10:57:44 2014

- checksum: 2707474481

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>EnableTransactions</key>

<key>KeepAlive</key>

<true/>

<key>Label</key>

<string>com.amazon.cloud-player</string>

<key>Program</key>

<string>/Applications/Amazon Cloud Player.app/Contents/MacOS/Amazon Music Helper</string>

<key>RunAtLoad</key>

<true/>

</dict>

</plist>

Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist

- mod date: Mar 21 08:37:17 2015

- checksum: 494922104

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.apple.FolderActions.folders</string>

<key>Program</key>

<string>/usr/bin/osascript</string>

<key>ProgramArguments</key>

<array>

<string>osascript</string>

<string>tell application "Folder Actions Dispatcher" to tick</string>

</array>

<key>WatchPaths</key>

<array>

<string>/Users/USER/Dropbox/Company stuff/Anna's invoices/New Ciel Invoices/toto</string>

<string>/Users/USER/Dropbox/New Ciel Invoices/To do</string>

<string>/Users/USER/Movies/catch torrents</string>

<string>/Users/USER/Movies/Catch</string>

</array>

</dict>

</plist>

Contents of Library/LaunchAgents/com.google.keystone.agent.plist

- mod date: Oct 8 22:11:32 2014

- checksum: 1992155819

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.google.keystone.user.agent</string>

<key>LimitLoadToSessionType</key>

<key>ProgramArguments</key>

<array>

<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.** ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>

<string>-runMode</string>

<string>ifneeded</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>StartInterval</key>

<key>StandardErrorPath</key>

<key>StandardOutPath</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

- mod date: Mar 30 16:33:16 2013

- checksum: 3497535427

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.macpaw.CleanMyMac.helperTool</string>

<key>OnDemand</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/Users/USER/Library/Application Support/CleanMyMac/CleanMyMacHelperTool</string>

</array>

<key>RunAtLoad</key>

<key>WatchPaths</key>

<array>

<string>/Users/USER/.Trash</string>

</array>

</dict>

</plist>

Contents of Library/LaunchAgents/com.macpaw.CleanMyMac.trashSizeWatcher.plist

- mod date: Mar 30 16:33:17 2013

- checksum: 2282156322

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.macpaw.CleanMyMac.trashSizeWatcher</string>

<key>OnDemand</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/Users/USER/Library/Application Support/CleanMyMac/CleanMyMacHelperTool</string>

<string>-watchTrashSize</string>

</array>

<key>RunAtLoad</key>

<key>StartInterval</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

- mod date: Mar 30 16:33:16 2013

- checksum: 3520574044

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.macpaw.CleanMyMac.volumeWatcher</string>

<key>OnDemand</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/Users/USER/Library/Application Support/CleanMyMac/CleanMyMacHelperTool</string>

<string>-cleanWinJunk</string>

<string>-cleanTrashes</string>

<string>-cleanMacOSJunk</string>

</array>

<key>RunAtLoad</key>

<key>StartOnMount</key>

<true/>

</dict>

</plist>

Contents of Library/LaunchAgents/com.nchsoftware.expressaccounts.agent.plist

- mod date: Jul 5 14:29:53 2014

- checksum: 1694747663

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.nchsoftware.expressaccounts.agent</string>

<key>ProgramArguments</key>

<array>

<string>/Users/USER/Library/NCH Software/ExpressAccounts/ExpressAccountsAgent</string>

<string>-service</string>

</array>

<key>OnDemand</key>

<key>RunAtLoad</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.nchsoftware.expressinvoicefr.agent.plist

- mod date: Aug 4 09:27:23 2014

- checksum: 1017913959

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.nchsoftware.expressinvoicefr.agent</string>

<key>ProgramArguments</key>

<array>

<string>/Users/USER/Library/NCH Software/ExpressInvoice/ExpressInvoiceAgent</string>

<string>-service</string>

</array>

<key>OnDemand</key>

<key>RunAtLoad</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.smithmicro.cleaning.schedulermailer.plist

- mod date: Apr 7 15:43:10 2008

- checksum: 1431059542

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.smithmicro.cleaning.schedulermailer</string>

<key>OnDemand</key>

<key>ProgramArguments</key>

<array>

<string>/Library/Smith Micro/Common/schedulermailer</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>UserName</key>

</dict>

</plist>

Contents of Library/LaunchAgents/com.spotify.webhelper.plist

- mod date: Jan 18 17:16:53 2015

- checksum: 925427895

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Label</key>

<string>com.spotify.webhelper</string>

<key>KeepAlive</key>

<dict>

<key>NetworkState</key>

<true/>

</dict>

<key>RunAtLoad</key>

<true/>

<key>Program</key>

<string>/Users/USER/Library/Application Support/Spotify/SpotifyWebHelper</string>

<key>SpotifyPath</key>

<string>/Applications/Spotify.app</string></dict>

</plist>

Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist

- mod date: Mar 11 15:40:11 2015

- checksum: 3654809970

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<dict>

<key>Disabled</key>

<true/>

<key>KeepAlive</key>

<key>Label</key>

<string>org.virtualbox.vboxwebsvc</string>

<key>Program</key>

<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>

<key>Sockets</key>

<dict>

<key>Listeners</key>

<dict>

<key>SockServiceName</key>

<key>SockType</key>

<string>stream</string>

<key>SockFamily</key>

</dict>

...and 1 more line(s)

Bad plists

Library/Preferences/com.analogworks.Earth.plist

Library/Preferences/com.radiodirectory.Car.plist

Library paths

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbcapi.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbcapi_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbcis12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbencod12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbextenv12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbextf.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbfile12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbftp12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbicu12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbicu12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbicudt12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbjdbc12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbjodbc12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdblib12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdblib12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbmlsynccli12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbodbc12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbodbc12_n.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbodbc12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbodbcansi12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbodbcinst12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbodm12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbperfapi12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbrsa12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbrsa12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbrsakp12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbscript12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbserv12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbsmtp12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbsrvmon12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbtasks12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbtasks12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libdbtool12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libmlcrsa12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libmljodbc12.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/librsoesupp12_r.dylib

/Applications/EBP-Compta et Devis-Factures 2015/SetupSyb/System/lib32/libsybbr.dylib

/Applications/Microsoft Office 2011/Office/MicrosoftSetupUI.framework/Libraries/mbupgx.dylib

/Applications/Microsoft Office 2011/Office/OPF.framework/Versions/14/Resources/OPF_Common.dylib

/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/Fm20.dylib

/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/MicrosoftOLE2TypesLib.dylib

/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/RefEdit.dylib

/Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/RichEdit.dylib

/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib

/Library/Frameworks/HPServicesInterface.framework/Versions/B/Libraries/libHPIOn etsnmp.5.dylib

/Library/Frameworks/MacFUSE.framework/Versions/A/Resources/Debug/libfuse.dylib. dSYM/Contents/Resources/DWARF/libfuse.dylib

/Library/Frameworks/MacFUSE.framework/Versions/A/Resources/Debug/libfuse_ino64. dylib.dSYM/Contents/Resources/DWARF/libfuse_ino64.dylib

/Library/Printers/Samsung/M2070/SCMS/libscmssc.dylib

/Library/Printers/Samsung/Utilities/AutoSetup/DOC.dylib

/Users/USER/Library/Application Support/Firefox/Profiles/jvxz9mwa.default/gmp-gmpopenh264/1.1/libgmpopenh264.dy lib

/Users/USER/Library/Application Support/Firefox/Profiles/jvxz9mwa.default/gmp-gmpopenh264/1.3/libgmpopenh264.dy lib

/Users/USER/Library/Application Support/Vuze/plugins/aeantivirus_v/BDUpdateServiceCom.dylib

/Users/USER/Library/Application Support/Vuze/plugins/aeantivirus_v/libbdscan.dylib

/Users/USER/Library/Application Support/Vuze/plugins/aeantivirus_v/libsmartscn.dylib

/Users/USER/Library/Application Support/Vuze/plugins/aznettor/libevent-2.0.5.dylib

/usr/lib/libPrintServiceQuota.1.dylib

/usr/lib/libbz2.1.0.3.dylib

/usr/lib/libdvdcss.2.dylib

/usr/lib/libgimpprint.7.dylib

/usr/local/lib/libfuse.2.dylib

/usr/local/lib/libfuse_ino64.2.dylib

App extensions

com.getdropbox.dropbox.garcon

Installations

Microsoft AutoUpdate for Mac: 05/10/2011 09:08

Office 2011 14.1.3 Update: 21/09/2011 09:17

MacKeeper: 05/08/2011 14:11

MacKeeper: 05/08/2011 14:07

Final Draft: 21/07/2011 15:40

Bad kernel extensions

/System/Library/Extensions/BJUSBLoad.kext

Elapsed time (sec): 1398

Reply

Answer 9

Linc Davis

Level 10

209,739 points

Mar 22, 2015 10:09 AM in response to staticmouse69

A

Disconnect the external display and the USB hub. See whether there's an improvement.

B

Uninstall "SIMBL" or "EasySIMBL" as follows. Back up all data before making any changes.

Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:

/Library

In the Finder, select

Go ▹ Go to Folder...

from the menu bar, paste into the box that opens by pressing command-V, then press return. A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.

Application Support/SIMBL

InputManagers/SIMBL

LaunchAgents/net.culater.SIMBL.Agent.plist

LaunchAgents/net.infinite-labs.SIMBLEnablerForSandboxedApps.plist

ScriptingAdditions/EasySIMBL.osax

ScriptingAdditions/SIMBL.osax

Log out and log back in. There may also be an item named "EasySIMBL" in the Applications folder. Delete it, if so.

Make sure you never reinstall any variant of SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

C

You can also try removing "VirtualBox."

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.

I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.

Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.

Back up all data before making any changes.

You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.

If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.

Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

D

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.

Back up all data before proceeding.

Step 1

If you have more than one user, and the one in question is not an administrator, then go to Step 2.

Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):

sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.

The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.

Step 2 (optional)

Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.

Start up in Recovery mode. When the OS X Utilities screen appears, select

Utilities ▹ Terminal

from the menu bar. A Terminal window will open. In that window, type this:

resetp

Press the tab key. The partial command you typed will automatically be completed to this:

resetpassword

Press return. A Reset Password window will open. You’re not going to reset a password.

Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.

Select your username from the menu labeled Select the user account if not already selected.

Under Reset Home Directory Permissions and ACLs, click the Reset button.

Select

 ▹ Restart

from the menu bar.

E

Back up all data.

Run the following command in the same way as before. It moves to the Trash "semaphore" files that have not been cleaned up by the system and may be interfering with normal operation. The files are empty; they contain no data. There will be no output this time.

find L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.??????? -exec mv {} .Trash/ \; 2>&-

Log out or restart the computer and empty the Trash.

F

Back up all data before proceeding.

Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.

Start up in safe mode to rebuild the font caches. Restart as usual and test.

Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.

If you still have problems, then from the Font Book menu bar, select

File ▹ Restore Standard Fonts...

You'll be prompted to confirm, and then to enter your administrator login password.

Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

G

The symbol cache file is very large. It stores data used in logs and crash reports, and it may have grown because there have been a lot of crashes. The file is created automatically, and if deleted, it should be recreated when you restart the computer. Initially, at least, it will be a lot smaller.

I've seen one unverified report that a system became unbootable when the cache was deleted. That would have been due to a corrupt installation of OS X, but you should be prepared to reinstall if necessary. There is no reason to panic as long as you have good backups, which you should already have if you got this far.

Enter the following command in the same way as before:

sudo mv /S*/*/Caches/com.apple.coresymbolicationd /tmp/

Restart the computer.

Reply

Answer 10

Mar 24, 2015 1:41 AM in response to Linc Davis

Hi. I did everything you recommended in your list, but nothing has changed.

Do you have any other suggestions or is it a clean reinstall??

Reply

Answer 11

Mar 24, 2015 6:23 AM in response to Linc Davis

By the way, I have now realised that after completing steps D and G last night, my TC back up became corrupted and Time Machine can no longer synch, telling me there's a lack of space. The oldest backup is now 7.30am today, and also the most recent.

When I try to delete the sparsebundle to start over, I get the message: The operation can’t be completed because the item “bands” is in use.

From browsing the forums, I'm thinking I have to erase the Time Capsule and try again. Is that right?

Reply

Answer 12

Linc Davis

Level 10

209,739 points

Mar 24, 2015 11:03 AM in response to staticmouse69

I did everything you recommended in your list, but nothing has changed.

Then you have, as I first suggested, a hardware fault.

I have to erase the Time Capsule and try again. Is that right?

That's an unrelated issue, and you haven't provided enough details. You should start a new discussion to address it, if you can't find a solution by searching the site. One thing you should never do is erase your only backup. If you don't already have another backup, back up immediately to a locally-attached hard drive. You need more than one backup anyway to be safe, as this experience shows.

Reply

Answer 13

Mar 25, 2015 1:27 AM in response to Linc Davis

Thanks for your help.

Reply

Answer 14

SeaPapp

Level 7

26,492 points

Mar 25, 2015 3:08 AM in response to staticmouse69

So you didn't uninstall Clean My Mac? That piece of software is garbage and the source for many slow downs.

Reply

Answer 15

Mar 25, 2015 3:18 AM in response to SeaPapp

Hi Mike

I did already reply to your post about that:

staticmouse69Mar 22, 2015 6:56 AM Re: iMac running very slowly - please help!
Re: iMac running very slowly - please help!in response to Mike Sombrio

That's very odd because after the first EtreCheck, I saw lots of references to that ****** program, so I had to download it again and get it to uninstall itself.

Then I did a second EtreCheck and that's what I uploaded.

How can I do it again??

Reply