'selected device has no input controls' Mic question
Hello I have a xenyx802 behringer mixer with a behringer at2020 condenser mic plugged into the mixer. The mixer is plugged into a firewire audio interface behringer fca202. In my sound preferences on my apple it says that the 'selected device has no input controls'
How do I get this working so that I can record from my new mic?
'selected device has no input controls' - this is because it doesn't need them - it's for interfaces which have no hardware level control: it doesn't affect whether it works or not, it's just that there is nothing to adjust.
Presumably the mixer has a main audio output: do you get audio out of this?
If no: then you haven't routed something correctly in the mixer.
If yes:
If you go into System Preferences>Sound, choose 'Input': can you see the mixer in the list?
If no: driver not properly installed
If yes:
Select the mixer as the input (this is for testing, it doesn't affect GB).
If you feed the mic into the mixer and you can hear it on the main audio output, do you see the meter in the Control Panel moving?
If no: the interface between the mixer and the computer needs looking at.
If yes:
In Garageband, check you have the mixer set as the input.
Record something on a track and play it back (having checked that playback of anything else, e.g. a loop. is OK): can you hear it?
If yes: enable monitoring in the track info.
If no: then we need to look more closely at the problem - please report back.
'selected device has no input controls' - this is because it doesn't need them - it's for interfaces which have no hardware level control: it doesn't affect whether it works or not, it's just that there is nothing to adjust.
Presumably the mixer has a main audio output: do you get audio out of this?
If no: then you haven't routed something correctly in the mixer.
If yes:
If you go into System Preferences>Sound, choose 'Input': can you see the mixer in the list?
If no: driver not properly installed
If yes:
Select the mixer as the input (this is for testing, it doesn't affect GB).
If you feed the mic into the mixer and you can hear it on the main audio output, do you see the meter in the Control Panel moving?
If no: the interface between the mixer and the computer needs looking at.
If yes:
In Garageband, check you have the mixer set as the input.
Record something on a track and play it back (having checked that playback of anything else, e.g. a loop. is OK): can you hear it?
If yes: enable monitoring in the track info.
If no: then we need to look more closely at the problem - please report back.
Do you not get any sound at all? Some devices have no input level controls, meaning you set the levels from the device, not from within GB. Is this what you mean? Have you looked in Audio/Midi setup as well?
Do you not get any sound at all?
---I can listen to headphones
Have you looked in Audio/Midi setup as well
---I added device in audio/midi, but there may be a problem with this when I tested it nothing happened
Have you set the mixer as an input in GarageBand?
---Yes I chose it as input.
Do you have phantom power turned on? Are you sure sound is coming out from mixer?
---phantom power pushed on. I can't detect any sound coming out of the behringer xenyx602
