Q: How do i set my Airport Express into bridge mode to mesh with new cable modem?

Question

triheel

Level 1 (0 points)

Time Warner sent me a new cable modem and My airport express continues blinking orange light. How do I set the airport express into bridge mode?

iMac, iOS 9.2

Posted on Mar 15, 2016 12:08 PM

I have this question too

Solved

Level 9 (53,994 points)

Wireless

A:

You can simply do so using the AirPort Utility on your iMac or iPhone, as follows:

Run the AirPort Utility.
Select the AirPort Express, and then, select Edit.
For a Mac:
- On the Network tab, change Router Mode to: Off (Bridge Mode)
- Select Update and allow the base station to restart.
For an iOS device:
- Select Advanced > DHCP and NAT
- Change Router Mode to: Off (Bridge Mode)
- Select Done and allow the base station to restart.

Posted on Mar 16, 2016 1:55 PM

Q: How do i set my Airport Express into bridge mode to mesh with new cable modem?

All replies

Helpful answers

Accepted Answer · Mar 16, 2016 1:55 PM

Tesserax

Level 9 (53,994 points)

Wireless

Mar 16, 2016 1:55 PM in response to triheel

You can simply do so using the AirPort Utility on your iMac or iPhone, as follows:

Run the AirPort Utility.
Select the AirPort Express, and then, select Edit.
For a Mac:
- On the Network tab, change Router Mode to: Off (Bridge Mode)
- Select Update and allow the base station to restart.
For an iOS device:
- Select Advanced > DHCP and NAT
- Change Router Mode to: Off (Bridge Mode)
- Select Done and allow the base station to restart.