Announcement: Upgrade to macOS Mojave

With features like Dark Mode, Stacks, and four new built-in apps, macOS Mojave helps you get more out of every click. 
Find out how to upgrade to macOS Mojave > https://support.apple.com/macos/mojave

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Question:

Question: High Sierra can't download from Apple servers at all

Hello,


I have just upgradet my iMac to OSX High Sierra.


I Run my OSX from an external SSD connected via USB, due to a internal harddrive fail this is the only way to run this MAC.


When i try to download apps from APP STORE the download starts, but stops after a few kb i downloaded and gives an error message ("There has been an error")

I can't update to the latest High Sierra Combo Update either, the error message sounds:


NSURLErrorDomain error -1005.)(-1005)


So i try to manually download the combo upgrade from this link https://support.apple.com/kb/DL1953?locale=da_DK- The download begins, but after a few kb's downloaded it turns to an error "Network connection lost".


I have absolutely no problems downloading from other websites, i can download small and very large files with no connection problems. I have tried to do the download from apple servers with- and without ethernet cable attached, just to make sure that my Wifi wasn't broken.


Under my own faultfinding i have tried to reset the NVRAM and the SMC controller, but no luck. I have also tried to delete the temporary download files in App Store folder, but no luck here either - the problem still exists.


Any ideas what to do ?

iMac

Posted on

Reply
Question marked as Apple Recommended
Answer:
Answer:

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later

You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac’s PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences.
  6. Start the computer in Safe Mode. Test in safe mode to see if the problem persists, then restart normally.
  7. Use Apple Hardware Test to see if there is any hardware malfunction.
  8. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list. Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  9. Repair permissions on the Home folder: Resolve issues caused by changing the permissions of items in your home folder.
  10. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  11. Download and install the OS X El Capitan 10.11.6 Combo Update or 10.12.6 Combo Update or Download macOS High Sierra 10.13.3 Combo Update as needed.
  12. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Reinstall OS X then click on the Continue button.
  13. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:
  1. Select Disk Utility from the Utility Menu and click on Continue button.
  2. When Disk Utility loads select the drive (out-dented entry) from the Device list.
  3. Click on the Erase icon in Disk Utility's toolbar. A panel will drop down.
  4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)
  5. Click on the Apply button, then wait for the Done button to activate and click on it.
  6. Quit Disk Utility and return to the Utility Menu.
  7. Select Reinstall OS X and click on the Continue button.

If none of the above helps then make an appointment at the Apple Genius Bar for service. If you need to find an Apple Store - Find a Store - Apple.


Posted on

Page content loaded

Question marked as Apple Recommended

Mar 15, 2018 12:53 PM in response to Xelot In response to Xelot

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later

You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac’s PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences.
  6. Start the computer in Safe Mode. Test in safe mode to see if the problem persists, then restart normally.
  7. Use Apple Hardware Test to see if there is any hardware malfunction.
  8. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list. Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  9. Repair permissions on the Home folder: Resolve issues caused by changing the permissions of items in your home folder.
  10. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  11. Download and install the OS X El Capitan 10.11.6 Combo Update or 10.12.6 Combo Update or Download macOS High Sierra 10.13.3 Combo Update as needed.
  12. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Reinstall OS X then click on the Continue button.
  13. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:
  1. Select Disk Utility from the Utility Menu and click on Continue button.
  2. When Disk Utility loads select the drive (out-dented entry) from the Device list.
  3. Click on the Erase icon in Disk Utility's toolbar. A panel will drop down.
  4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)
  5. Click on the Apply button, then wait for the Done button to activate and click on it.
  6. Quit Disk Utility and return to the Utility Menu.
  7. Select Reinstall OS X and click on the Continue button.

If none of the above helps then make an appointment at the Apple Genius Bar for service. If you need to find an Apple Store - Find a Store - Apple.


Mar 15, 2018 12:53 PM

Reply Helpful
User profile for user: Xelot

Question: High Sierra can't download from Apple servers at all