Can't fresh install macOS high Sierra

Internet/Network Recovery of El Capitan or Later on a Clean Disk

If possible backup your files before proceeding.

1. Restart the computer. Immediately after the chime hold down the (Command-Option-R) keys until a globe appears.
2. The Utility Menu will appear in from 5-20 minutes. Be patient.
3. Select Disk Utility and click on the Continue button.
4. When Disk Utility loads select the drive (usually, the out-dented entry) from the side list.
5. Click on the Erase tab in Disk Utility's main window. A panel will drop down.
6. Set the partition scheme to GUID.
7. Set the Format type to APFS (SSDs only) or Mac OS Extended (Journaled.)
8. Click on the Apply button, then click on the Done button when it activates.
9. Quit Disk Utility and return to the Utility Menu.
10. Select Reinstall OS X and click on the Continue button.

Note:

1. To install the version of OS X that was currently installed use Command-Option-R.

2. To install the original factory version when the computer was new use Command-Option-Shift-R.

Bootable USB Installers for OS X Mavericks, Yosemite, El Capitan, and Sierra

First, review this introductory article: Create a bootable installer for macOS. Second, see this How To outline for creating a bootable El Capitan installer. Simply replace the Terminal command with the one from the preceding article by copying it into the Terminal window. You will need an 8GB or larger USB flash drive that has been partitioned and formatted for use with OS X.

Drive Partition and Format

1. Open Disk Utility in the Utilities' folder.
2. After Disk Utility loads select the drive (out-dented entry with the mfg.'s ID and size) from the side list.
3. Click on the Erase tab in the Disk Utility toolbar. Name the drive, "MyVolume". <---- IMPORTANT!
4. In the drop down panel set the partition scheme to GUID. Set the Format type to Mac OS Extended (Journaled.)
5. Click on the Apply button and wait for the Done button to activate. When it does click on it.
6. Quit Disk Utility.

Create Installer

Open the Terminal in the Utilities' folder. Choose the appropriate command line (in red) depending upon what OS X installer you want. Paste that entire command line from below at the Terminal's prompt:

Command for macOS High Sierra:

sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ High\ Sierra.app

Command for macOS Sierra:

sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app

Command for El Capitan:

sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app

Command for Yosemite:

sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ Yosemite.app

Command for Mavericks:

sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ Mavericks.app

Press RETURN. You will be asked for your admin password. It will not echo to the Terminal window. Then press RETURN again. Wait for the return of the Terminal prompt signifying the process has completed. It takes quite some time to finish. Be patient.

The problem most likely is a defective download of OS X. Try re-downloading the installer. Be sure to use Ethernet. Wi-Fi cannot be relied on.

If you have unreliable Wi-Fi there's nothing you can do except try a different connection with very fast Wi-Fi or where you can use Ethernet.