Black screen when trying to install Windows 10 w/ Bootcamp

Can you elaborate on how to install the driver during Windows setup, without having access to Windows 10? The bootcampdrivers.com website only shows an install tutorial on a system with Windows 10 fully installed.

I have yet to be prompted for a drivers installation. I think there was a misunderstanding on what step of the installation process I get stuck on.

Here is the part of the installation that finishes fine before the reboot:

This completes, and after the restart I get a screen that looks like this:

This is where I get stuck. I get this result when trying to install Windows 10 1709 and Windows 10 1803. I have also tried to install Windows 10 1607, but after the installation step showed above, the computer restarts to a "CRITICAL_PROCESS_DIED" error, which puts me in another boot loop.

Also SIP has been disabled for all of these installations, because I heard that it can cause problems occasionally.

The name of the file is:

en_Windows_10_1607_build_14393_x64_dvd.iso

The MD5sum in Terminal resulted in:

MD5 (/Users/[My Username]/Downloads/en_Windows_10_1607_build_14393_x64_dvd.iso) = 88b98698600511dcd69596df92b242e5

Here's the output from Terminal:

/dev/disk0 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 500.3 GB disk0

1: EFI EFI 314.6 MB disk0s1

2: Apple_APFS Container disk1 319.0 GB disk0s2

3: Microsoft Basic Data BOOTCAMP 181.0 GB disk0s4

/dev/disk1 (synthesized):

#: TYPE NAME SIZE IDENTIFIER

0: APFS Container Scheme - +319.0 GB disk1

Physical Store disk0s2

1: APFS Volume Macintosh HD 210.8 GB disk1s1

2: APFS Volume Preboot 44.5 MB disk1s2

3: APFS Volume Recovery 1.0 GB disk1s3

4: APFS Volume VM 1.1 GB disk1s4

I was able to remove the Boot Camp partition with no problems.

Here is the output of the repair:

Started partition map repair on disk0

Checking prerequisites

Checking the partition list

Adjusting partition map to fit whole disk as required

Checking for an EFI system partition

Checking the EFI system partition's size

Checking the EFI system partition's file system

Checking the EFI system partition's folder content

Checking all HFS data partition loader spaces

Checking booter partitions

Reviewing boot support loaders

Checking Core Storage Physical Volume partitions

The partition map appears to be OK

Finished partition map repair on disk0

Here is the new result of diskutil list:

/dev/disk0 (internal):

#: TYPE NAME SIZE IDENTIFIER

0: GUID_partition_scheme 500.3 GB disk0

1: EFI EFI 314.6 MB disk0s1

2: Apple_APFS Container disk1 500.0 GB disk0s2

/dev/disk1 (synthesized):

#: TYPE NAME SIZE IDENTIFIER

0: APFS Container Scheme - +500.0 GB disk1

Physical Store disk0s2

1: APFS Volume Macintosh HD 210.7 GB disk1s1

2: APFS Volume Preboot 44.5 MB disk1s2

3: APFS Volume Recovery 1.0 GB disk1s3

4: APFS Volume VM 1.1 GB disk1s4

Ran it, here is the output:

** Checking volume.

** Checking the container superblock.

** Checking the EFI jumpstart record.

** Checking the space manager.

** Checking the object map.

** Checking the APFS volume superblock.

** Checking the object map.

** Checking the fsroot tree.

** Checking the snapshot metadata tree.

** Checking the extent ref tree.

** Checking the snapshots.

** Checking the APFS volume superblock.

** Checking the object map.

** Checking the fsroot tree.

** Checking the snapshot metadata tree.

** Checking the extent ref tree.

** Checking the snapshots.

** Checking the APFS volume superblock.

** Checking the object map.

** Checking the fsroot tree.

** Checking the snapshot metadata tree.

** Checking the extent ref tree.

** Checking the snapshots.

** Checking the APFS volume superblock.

** Checking the object map.

** Checking the fsroot tree.

** Checking the snapshot metadata tree.

** Checking the extent ref tree.

** Checking the snapshots.

** Verifying allocated space.

** The volume /dev/rdisk1 appears to be OK.

I created a Windows 10 USB installer by using the WMCT and installed the latest Windows 10 1803 using Boot Camp. The normal Windows 10 setup sequence failed with the lit-up black screen and cursor as usual. I then restarted and selected the EFI Boot from the USB, and attempted to install Windows 10 with that setup tool. It failed in the same manner, resulting in a lit-up black screen with the cursor.

However, I do have access to all of the Windows repair tools now. I tried to repair Windows startup using the tool, and it said there was nothing to repair.

I haven't found a file named setupapi.dev.log, but if found two files named setupapi.offline.log and setupapi.offline.20160716_044743.log.

Should I look for errors in these files? If so, the files are quite long, what should I look for to find an error?

Okay, I followed the instructions in your tutorial. I formatted a USB, downloaded the Windows support software to it, and then copied over all of the files from the Windows 10 1607 ISO, but I did not create a partition yet as it says in the tutorial.

Which parts should I remove from the USB installer?

Okay, I removed the AMD Drivers from the USB Installer and moved them to my Desktop, in case we need them later.

Should I now follow the rest of your Boot Camp USB installer tutorial and try to install Windows without AMD drivers, or are we going to try to replace the AMD drivers with different ones from another source and then install?

I am connected to my home WiFi in macOS when I run Bootcamp, but I don't connect to it during the Windows installation.