Apple 4K TV Bouncing

Hi All,

I bought the latest Apple 4K TV and connected it to my switch. I use a syslog called Syslog Watcher (syslogwatcher.com) and it's a very good product that catches traps, alarms, alerts on the network and the cisco switch that my Apple 4K TV is connected to is flooding my Syslog Watcher with UP/DOWN events every 1 or 2 seconds, very rapidly. The Syslog watcher is able to handle that rapid influxed of log messages, but I can't have that.

I did everything: I configured my cisco switch interface to be either auto negotiate the speed/duplex and hard coded them to 1Gig/Duplex and still have the problem. I even set the apple TV to sleep never, but it still goes to sleep and floods my Syslog Watcher server with all these flapping interface messages. I bought this 4K TV to replace the previous apple tv. I just swapped them, so the new one was using the same cable and switch port as the old one. The old one didn’t have this issue, so my cable and switch port is fine. I researched and saw similar problems reported on the Apple 4K TV, but I see no resolution and that thread found below has been closed. Does anyone know if there has a been a fix?

Re: Apple TV 4K - Ethernet constantly connects/disconnects while in sleep mode