Konica Minolta 2530DL

Hey!

I am having the same problem with my km2530DL. It worked perfectly before I upgraded to Leopard. I have tried both Bonjour and USB, and neither works. The printer is recognized, but stops the job prior to printing.

Thanks.

Exactly the same issue here. Anyone have any ideas?

Not sure if this will help, but when I've had similar issues with our 2430DL under Tiger, I turn off the printer and turn it back on and that seems to help.

Haven't had a chance yet to try printing with Leopard so this may be no help here.

Ditto on the Konica Minolta 2530DL issue. Upgraded... can't print. Same behavior as described by others. It just stops.

No known solution... have tried many avenues... Reboot, shut down, printer shut down, direct wire, wireless... all fail. Wish I could offer a solution but I can't.

Even tried gutenprint along with a few other drivers. No luck.

This is not good. I'll post if I can figure anything out but short of a new driver from Konica Minolta, I'm not holding my breath.

Same issue here. I tried Bonjour, Ip (lpd) printing, 2 different drivers and no results. I have noticed though that in the print que, after sending a print job to the machine, it has a strange print que name listed with it. According to all documentation on minolta's site, the print que and the ip have to be the same. Tried that and get yet another strange que name.

It seems that cups is using a different name for the print que no matter what you put in, it changes it to what ever it wants.

The only print job i was able to get out of it was using the webserver built into the printer and telling it to do a test print. But that is bypassing the print driver and cups, and only using safari.

Exact same problem here. I have tried other every conceivable avenue to solve the problem. In the error log I get: Job stopped due to filter errors. I have been able to get the printer to print with some functions using the Xerox Phaser 6115MFP. Like the rest of you, I really need this fixed ASAP!

Hi I HAD the same issue. What I did - I went into the system prefs then security. I disable the firewall, then it printed, enable the FW again reboot and it still works. Hope this may help someone

No firewall here either.

I had a similar problem with my 2430DL (possibly generically similar to 2530?).

I downloaded the driver from the Konica Minolta site and first uninstalled the magicolor driver (since I'd been faffing about trying many different drivers that I'd got stored on my hard drive from previous installations).

Then I re-installed it and it works!

After an archive install, I reinstalled the 2430DL driver and, even with the firewall on, it works.

At least we know that Konica Minolta's drivers aren't terribly far off so a fix shouldn't take too long. Knock on wood.

You could but I doubt you'll get very far. Just a thought. Why not try the 2430Dl driver. Might work?

Hey!

Just wanted to let everyone know - Konica Minolta's Technical Support Phone Number is 877-778-2687, M-F, 7am - 7pm, Central.

I have tried everything and will be calling tomorrow. I need my printer!

Good Luck!