NCguitarWiz Author

Level 1

8 points

No signal going to Master Audio Track

I'm totally stuck.

I see tracks which are assigned to Stereo Out, but no audio is reaching Master Audio track.

If I switch to Internal Core audio, I get playback.

Using Focvusrite Scarlett 6i6

Thank you in advance

I've checked audio preferences everything looks right

Posted on Nov 8, 2019 9:53 AM

Reply

Similar questions

No sound from external hardware I have an Elektron Digitakt and Focusrite Scarlett 18i8 My first issue is that when I create an audio channel for the Digitakt there is no sound, meters on the 18i8 and in logic are lit up but the audio does not make it to the stereo output, if there is a delay effect on the drums I hear the tail of this when I stop play back I am having the same issue running an audio channel out of output 3 on the 18i8 then back in to input 3 via some pedals. The meters are showing the audio going in but nothing makes it the stereo output in logic. It works ok in Ableton so I’m pretty sure it’s a logic issue. Strangely it will work maybe 10% of the time but as soon as playback is stopped and started again it’s gone. Any help greatly appreciated Thanks
828 2
Help! Not getting any input to Logic Pro from Scarlett 2i2 after Sonoma install After I had updated to os Sonoma 14.1 and everything looked okay in my Logic Pro, I loaded my project and it played great but, when I started a new audio track and using the audio from my iPad into the Scarlett like I always do, there's no audio input to record.. All my settings were the same exact from the previous OS Ventura as well..
2305 8
Audio dropouts when recording in Logic Pro with Scarlett Solo USB interface Hey everyone, I'm having trouble with audio dropouts when recording vocals in Logic Pro and was hoping someone could help me troubleshoot the issue. The vocals will record fine for a few measures but then drop out at specific parts. It's as if the volume of a particular note is causing it to drop, and there's a hum and sometimes a crackle with the absent note. Additionally, I'm not getting any sound when recording guitar, which just started happening. I've already tried using two different mics and cables, attempted takes in low-latency mode in Logic, and ensuring that the recording is enabled for channels. I even bought a new interface, but the issue persists. I'm using a Scarlett Solo USB interface for input and output on my 2020 M1 Mac Mini and only using one channel of the third-party plugin Nectar 3 by iZotope. Here are my audio settings: 1/O Buffer Size: 128; Resulting Latency: 11.6 ms Roundtrip (5.7 ms Output); Processing Threads: Automatic (Recommended); Process Buffer Range: Medium; Multithreading: Playback & Live Tracks; Summing: High Precision (64-bit); Does anyone have any suggestions on what could be causing these audio dropouts and how I can fix them? Any advice would be greatly appreciated. I appreciate any help you can provide.
8394 14

7 replies

Level 6

14,788 points

Nov 8, 2019 6:53 PM in response to NCguitarWiz

Under Logic's Preferences I/O Assignments what is the Output assigned to

In Logic's Preferences/Audio set Bothe Input and Output to the Scarlett. Make sure the volume knob is up at least halfway.

Reply

NCguitarWiz Author

Level 1

8 points

Nov 9, 2019 8:35 AM in response to NCguitarWiz

I did a factory reset on Scarlett, now its working thank you for your help

Reply

Level 6

14,788 points

Nov 8, 2019 11:57 AM in response to NCguitarWiz

Do you have speakers or headphones attached to the Scarlett? If so are the speakers hooked up to Outputs 1-2?

Reply

Level 6

14,788 points

Nov 9, 2019 7:59 AM in response to NCguitarWiz

Almost has to be external. Does the Scarlett have an output Source toggle on the front panel?

Reply

NCguitarWiz Author

Level 1

8 points

Nov 8, 2019 12:51 PM in response to Pancenter

Yes, Outputs 1-2 going to KRK monitors

Reply

NCguitarWiz Author

Level 1

8 points

Nov 9, 2019 6:53 AM in response to Pancenter

Verified I/O settings still nothing

I am truly vexed

Reply

NCguitarWiz Author

Level 1

8 points

Nov 9, 2019 8:32 AM in response to Pancenter

No toggle, sound isn't getting to headphone outputs either.

Reply

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

No signal going to Master Audio Track

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up