You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
Just added a CyberPower UPS to which my mac mini 2018 (and monitors) are connected.
On CyberPower site, it is said that a mac can be set with the UPS to shut down in case of power outage without using their software.
The following article say same thing: https://support.apple.com/lv-lv/guide/mac-help/mchlp2987/mac
However, there is no such option as ''UPS'' under ''Energy Saver'' as the article suggests...
macOS 11.4
Is the Mac cabled to the battery, and then rebooted?
Depending on the model, a Schneider APC battery usually has a funky USB cable involved.
If that connection and reboot doesn’t cause the battery to be detected, check with the battery vendor.
Is the Mac cabled to the battery, and then rebooted?
Depending on the model, a Schneider APC battery usually has a funky USB cable involved.
If that connection and reboot doesn’t cause the battery to be detected, check with the battery vendor.
Reset NVRAM and SMC and boot through Safe Mode and try again, assuming an Intel Mac.
Reset NVRAM or PRAM on your Mac - Apple Support
How to reset the SMC of your Mac - Apple Support
How to use safe mode on your Mac - Apple Support
If there are add-on anti-malware or anti-virus apps, add-on cleaner apps, or VPN add-on apps, remoce them and try again.
Thank you both for your answers. Indeed, while I had connected the cable, I had not yet rebooted the mac. Now that I did, the UPS button (including model) is there and I can configure.
Much appreciated!
I mistakingly disconnected a non-UPS power bar where was connected the USB hub I use for connecting the UPS unit, then realized even after reconnecting that the button in Apple Energy Saver disappeared.
I tried to restart, then as it did not bring it back, to completely shut down and cold boot, but it's still not reappearing.
The idea is that I eventually wish indeed to plug that USB hub into the UPS unit of course, so it can do its job in case of power outage.
Have you ever experienced this issue with the CyberPower unit ?
I have a CyperPower UPS. If the usb cable is connected from the UPS to Mac then a UPS menu button should show in the Energy Saver preference. If not try another cable.
How to set mac mini for shutdown with UPS?
