You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Не могу активировать Ipad 2 после сброса настроек

Не могу активировать Ipad 2 после сброса настроек.


Через Itunes

Выдает "Выполнить активацию устройства не удалось.


Отсоедините iPad от компьютера, затем подсоедините его снова, чтобы мы смогли его активировать. Приносим извинения за возможные неудобства."


Пробовал много раз


Через WiFi

"Ошибка Активации

Запрос на активацию не удалось завершить. Повторите попытку активации позже"

Тоже пробовал много раз с разных точек доступа

Очень недоволен тем, что не могу активировать девайс, который работал ранее

iPad 2 3G

Posted on Nov 14, 2021 7:27 AM

Reply
Question marked as Top-ranking reply

Posted on Nov 15, 2021 8:21 AM

Translation:


I can't activate iPad 2 after resetting


I can't activate iPad 2 after i reset.


Via itunes

Displays "Device activation failed.


Disconnect the iPad from the computer, then reconnect it so we can activate it. We apologize for any inconvenience."


Tried many times


Via WiFi

"Activation error

The activation request could not be completed. Try activation again later"

Also tried many times from different access points

Very dissatisfied with the fact that I can not activate the device that worked earlier



We see regular reports of issues activating (now 10 year old) iPad2 devices. 


You may have greater chance of success if you connect your iPad to a PC (with iTunes installed) or a Mac (with iTunes or Finder - as appropriate for the installed version of macOS). Once connected to your computer, your iPad will be detected - and you should be able to activate using iTunes.


  1. Make sure that you have the latest version of macOS or the latest version of iTunes.
  2. Check that your computer has an Internet connection.
  3. With the cable that came with your iPad, connect your iPad to your computer. Locate your device on your computer.
  4. Wait while your computer detects and activates your iPad:
  • If you see an alert that shows "Set up as New" or "Restore from Backup", it means your iPad is activated.
  • If you get an error message that says the "activation information was invalid" or "activation information could not be obtained from the device", use recovery mode to restore your iPhone.



A restart of your WiFi Router and/or a change of DNS settings may be helpful.


To restart you home router, disconnect power - then wait at least 30 seconds before restarting. When you router has rebooted (which may take several minutes), force-restart your iPad:


  • On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.
  • On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.





For recommended DNS servers (configured at your home router and/or your iPad), you might choose one of the following Recursive DNS Providers (IPv4 and IPv6 addresses included below):


Quad9

9.9.9.9

149.112.112.112

2620:fe::fe

2620:fe::9


OpenDNS

208.67.222.222

208.67.220.220

2620:0:ccc::2

2620:0:ccd::2


Cloudflare+APNIC

1.1.1.1

1.0.0.1

2606:4700:4700::1111

2606:4700:4700::1001


Should it be necessary to escalate your issue to Apple Support, the quickest route to engaging with Apple Support will be via the  Get Support link at top-right of this page.



You need to be aware that very old first generation iPad2 can only be updated to iOS 9.3.5 (WiFi Only models) or iOS 9.3.6 (WiFi & Cellular models).


Apple ended update support for iPad2 in September 2016. Your iPad cannot be updated to iOS 10 or later major versions of iOS as the internal hardware does not meet the minimum technical requirements for new versions of iOS/iPadOS. This limitation cannot be bypassed; iPad2 is a 32-bit architecture device, whilst all recent versions of iOS/iPadOS are designed for 64-bit hardware platforms. iPad2 is obsolete.


Compatible Apps for your iPad are increasingly difficult to find - as third-party developers are increasingly dropping support for 32-bit devices and iOS versions preceding iOS11/12/13. As older versions of Apps are removed from the Apple App Store, you’ll not be able to (re)download or install them - which may severely limit the usefulness and utility of your iPad. As such, if you want or need to access most current Apps, requiring more recent versions of iOS, you’ll need to consider replacement of your iPad with a newer or current model.


Of current models, even the entry-level iPad9 has specifications and capabilities that will massively outperform you current iPad - and is compatible with the vast majority of current Apps. Other models are more powerful still.


I hope this information provides clarity as to your available options - and the fundamental limitations of your current iPad.





Similar questions

10 replies
Question marked as Top-ranking reply

Nov 15, 2021 8:21 AM in response to Shadyq19

Translation:


I can't activate iPad 2 after resetting


I can't activate iPad 2 after i reset.


Via itunes

Displays "Device activation failed.


Disconnect the iPad from the computer, then reconnect it so we can activate it. We apologize for any inconvenience."


Tried many times


Via WiFi

"Activation error

The activation request could not be completed. Try activation again later"

Also tried many times from different access points

Very dissatisfied with the fact that I can not activate the device that worked earlier



We see regular reports of issues activating (now 10 year old) iPad2 devices. 


You may have greater chance of success if you connect your iPad to a PC (with iTunes installed) or a Mac (with iTunes or Finder - as appropriate for the installed version of macOS). Once connected to your computer, your iPad will be detected - and you should be able to activate using iTunes.


  1. Make sure that you have the latest version of macOS or the latest version of iTunes.
  2. Check that your computer has an Internet connection.
  3. With the cable that came with your iPad, connect your iPad to your computer. Locate your device on your computer.
  4. Wait while your computer detects and activates your iPad:
  • If you see an alert that shows "Set up as New" or "Restore from Backup", it means your iPad is activated.
  • If you get an error message that says the "activation information was invalid" or "activation information could not be obtained from the device", use recovery mode to restore your iPhone.



A restart of your WiFi Router and/or a change of DNS settings may be helpful.


To restart you home router, disconnect power - then wait at least 30 seconds before restarting. When you router has rebooted (which may take several minutes), force-restart your iPad:


  • On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.
  • On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.





For recommended DNS servers (configured at your home router and/or your iPad), you might choose one of the following Recursive DNS Providers (IPv4 and IPv6 addresses included below):


Quad9

9.9.9.9

149.112.112.112

2620:fe::fe

2620:fe::9


OpenDNS

208.67.222.222

208.67.220.220

2620:0:ccc::2

2620:0:ccd::2


Cloudflare+APNIC

1.1.1.1

1.0.0.1

2606:4700:4700::1111

2606:4700:4700::1001


Should it be necessary to escalate your issue to Apple Support, the quickest route to engaging with Apple Support will be via the  Get Support link at top-right of this page.



You need to be aware that very old first generation iPad2 can only be updated to iOS 9.3.5 (WiFi Only models) or iOS 9.3.6 (WiFi & Cellular models).


Apple ended update support for iPad2 in September 2016. Your iPad cannot be updated to iOS 10 or later major versions of iOS as the internal hardware does not meet the minimum technical requirements for new versions of iOS/iPadOS. This limitation cannot be bypassed; iPad2 is a 32-bit architecture device, whilst all recent versions of iOS/iPadOS are designed for 64-bit hardware platforms. iPad2 is obsolete.


Compatible Apps for your iPad are increasingly difficult to find - as third-party developers are increasingly dropping support for 32-bit devices and iOS versions preceding iOS11/12/13. As older versions of Apps are removed from the Apple App Store, you’ll not be able to (re)download or install them - which may severely limit the usefulness and utility of your iPad. As such, if you want or need to access most current Apps, requiring more recent versions of iOS, you’ll need to consider replacement of your iPad with a newer or current model.


Of current models, even the entry-level iPad9 has specifications and capabilities that will massively outperform you current iPad - and is compatible with the vast majority of current Apps. Other models are more powerful still.


I hope this information provides clarity as to your available options - and the fundamental limitations of your current iPad.





Nov 16, 2021 1:00 PM in response to Shadyq19

Shadyq19,


From what we've read, you're unable to activate your iPad, including when trying to activate through iTunes. The following article states for iPhone devices, but it should help with your iPad too: If you can't activate your iPhone - Apple Support


If you follow that article and still have issues activating, you can contact Apple Support for further assistance here: Contact Apple Support


Best wishes.

Nov 19, 2021 6:43 AM in response to port-sigar

Добрый день. Точно такая же проблема. Можете подробно описать, что Вы конкретно делали?

Сменил dns адреса из рекомендуемых в сетевом подключении. Все равно ошибка активации.

Nov 17, 2021 12:53 PM in response to claire504

Все что вы советуете не работет.

Через системный журнал я вижу такое

Nov 17 23:36:22 port-sigar mobileactivationd[86] <Notice>: 0x1f081000 MA: -[MobileActivationDaemon createSessionInfoWithCompletionBlock:]: Session creation requested by Setup<142>

Nov 17 23:36:23 port-sigar mobileactivationd[86] <Notice>: 0x1f197000 MA: -[MobileActivationDaemon createActivationInfoWithCompletionBlock:]: Activation info creation requested by Setup<142>

Nov 17 23:36:23 port-sigar mobileactivationd[86] <Error>: libMobileGestalt MGBasebandSupport.c:195: No kCTMobileEquipmentInfoMEID in CT mobile equipment info dictionary


серийный номер устройства DN6GHCTEDFJ3. по нему вы предлагаете мне обратиться в ремонт.

устройство на протяжении почти 10 лет принадлежало мне. документы о покупке уже давно выброшены. что предлогаете?

сим карта исправная и планшет ее видит. и несколько дней назад тоже видел. после сброса настроек и обновления на 9.3.5 и нет сети и не активируется.


жду от вас более внятной поддержки чем "перезагрузите ipad" или "используйте оригинальный датакабель"


Nov 16, 2021 6:35 AM in response to Shadyq19

+ все аналогично.


3 после обновления на 9.3.5 не могу активировать.


Думаю если яблоко не может обеспечить стабильность работы устаревшей платформы. то пора бы разблокировать этих старичков и ставь что хочешь.

Не могу активировать Ipad 2 после сброса настроек

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.