When will Apple fix DRM playback issues with Display Link Docks/Monitors

DRM content will not display correctly when using Display Link with multiple monitors. When will Apple fix this?

MacBook Pro 16″, macOS 12.6

Posted on Oct 27, 2022 2:47 PM

Similar questions

Studio Display: No Camera, No Sound Studio Display with M1 mini not showing (under preferences) itself, and no display camera (under preferences). Screen is connected with images working fine, just no sound or camera. Tried the usual workarounds: unplug / plug (even overnight), other computers w/ Ventura, turned off file vault (for whatever reason), and danced a jig. Nada. Yes, phoned Apple support -- not sure he had seen anything quite like a Studio Display. Escalated the case, and taking their time getting back. Anyone familiar? Happy New Year!
2145 18
ATV4K HDR Metadata Max CLL/FALL I use the ATV4K 3rd gen as a streaming box. I noticed that some shows look very washed out (Andor on Disney+ is a good example). In troubleshooting I found that when content doesn't define HDR metadata, the ATV4K defaults to outputting HDR metadata of 4000/1000 Max CLL/FALL (definitions below). The problem with this is that 4000/1000 is a ridiculously high value. This causes the display to think that it is dealing with incredibly bright content, and it therefore lowers its brightness output to compensate. Has anybody has found a fix or workaround for this issue? MaxFALL (Maximum Frame Average Light Level) indicates the maximum value of the frame average light level (in cd/m2 or nits) of the entire playback sequence. MaxFALL is calculated by averaging the decoded luminance values of all the pixels within a frame. MaxFALL is usually much lower than MaxCLL. MaxCLL (Maximum Content Light Level) indicates the maximum light level of any single pixel (in cd/m2 or nits) of the entire playback sequence. MaxCLL is usually measured off the final delivered content after mastering. If one uses the full light level of the HDR mastering display and adds a hard clip at its maximum value, MaxCLL would be equal to the peak luminance of the mastering monitor.
2088 3
Ultrawide 49" Display <> Macbook Air 2018 in Ventura 13.1 issues Hello, Today I decided to update to macOS Ventura, since doing so I have been experiencing display issues with an external monitor. I believe this is an Apple side issue with macOS Ventura. I have done some research and stumbled upon a few other Apple users having similar issues. On reddit, on /r/ultrawidemasterrace The graphical issue is identical to what I am experiencing (it looks different because my wallpaper is different). I am using a MacBook Air, Retina, 13-inch, 2018 with a 1.6 ghz Dual-Core Intel Core i5 Up to this point, I was having no issue on Monterey or Catalina with running this display. This happened immediately after installing the Ventura software update. For context, I am using a caldigit element hub 4 as my central docking station. I have tried both the hdmi and displayport inputs into this monitor, I normally use dp. I use a dp to lightning converter since the element hub 4 doesn't have DP or HDMI ports, only USB-A and USB-C ports. I have tried connecting the monitor directly to the air, and using the other port for power, this did not help. Users on MacRumor's forum are reporting similar issues since October. Ventura external display problem Temporary fix for external monitor issue over usb-c in Ventura So far, the workarounds seem to be Revert back to previous operating systems Run a process in terminal every single time sudo sleep 20 ; sudo kill -9 $(pgrep WindowServer) Run the monitor in PIP mode (only using half the resolution) Potentially booting from Safe mode Please have one of your Software Engineers address what is causing this bug. My theory is this appears to be tied to the resolution or refresh rate exceeding the graphical capabilities of the macbooks, but this is happening across different models. All of the previous hardware and displays has worked, so it cannot be a hardware issue. I do like the new operating system, and would not want to revert to an older version simply to get my display working again. I have attempted to go into the Displays setting and adjusting the resolution, but I mistakenly selected the "use as main display" dropdown (when using my laptop to adjust settings) and now cannot navigate/access to undo this mistake as it has to be in that mode to see that setting again. Other settings do not allow you to adjust display preferences - another potential fix in the future. I hope apple can roll out a fix quickly, because this is debilitating. Thank you,
8684 30

1 reply

muguy

Level 10

92,060 points

Oct 27, 2022 3:03 PM in response to Dukeofunk

Not so sure it’s an Apple issue

https://support.displaylink.com/knowledgebase/articles/830301-content-protected-video-does-not-play-on-mac-while

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

When will Apple fix DRM playback issues with Display Link Docks/Monitors

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up