Macbook Pro M2 Kernel Panicking and Keeps Restarting

tuneddriver Said:

"Macbook Pro M2 Kernel Panicking and Keeps Restarting: Hello guys. Today when I was using my new MBP M2 it suddenly restarted and now restarting every 4-5 minutes when I turn it on. Could you help me with this?"

-------

Thank you for the photo.

Troubleshooting a Mac in a Boot Loop:

Being continuous, it seems there is an error in the caches. So, refer to the following...

A. Boot in Safe Mode:

In Safe Mode, Login Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install. For instructions, go here: How to Use Safe Mode on your Mac - Apple Support

B. Reset your SMC and your NVRAM:

(Applies to Intel-Basel Macs Only): Sometimes changes (i.e. Installations) are made to the system and then settings (i.e. Networking) become corrupted, technically. So, reset both on your Mac. So, reset the SMC and reset the NVRAM or PRAM. It might take three tries. to fix this. So, be certain you have the time to do so.

Start With This:

• Reset NVRAM or PRAM on your Mac - Apple Support
• How to Reset the SMC of your Mac - Apple Support

C. Re-Mount the Drive:

Boot into Recovery Mode (Intel or Silicon) . You need to click the “Mount’ button to proceed. So, select the drives, and then click "Mount" Try rebooting once more. If of no success, then click unmount button, and then the mount button. Try rebooting once more. It looks dulled-out. So, if you cannot click it, then click the First Aid button to fix this volume.

tuneddriver Said:

“Macbook Pro M2 Kernel Panicking and Keeps Restarting: Thank you for your answer. I entered the safe mode and updated my software to macOS Monterey 12.6.2 and it seems that the problem has gone. Wish you a great day.”

———-

You are welcome.

👍Excellent Job Torubleshooting!

that's a variety of different issue related to Bus interfaces and WiFi hardware. You should make a Genius Bar appointment to have your Mac looked at. If you can, try running there diagnostic, but that may be very difficult.

One more thing you always do to separate Hardware from added Software, is try to replicate the issue in Safe mode, where no third-party add-on are loaded automatically.

some of those messages refer to AppleT811Pcie port, and wireless LAN.

If you are using an external dongle for LAN access, remove it for debugging.