Boot Camp Win 10 wake problems on Macbook Pro

Here's what worked for me...

(Apple OS X 10.12 Sierra, Bootcamp, & Windows 10 Pro 64-bit)

1. Made sure Bootcamp's start-up disc was set identically through both the Mac Bootcamp manager application as well as the Windows Bootcamp Control Panel. I set mine to Windows on both platform.
2. The Windows platform clock needs to be reset. Follow the instructions in this Microsoft forum post:

Microsoft Community See the 2nd post from Senator949 on August 13, 2015, beginning with "And the fix is:"

Instructions are reproduced here in case the links/threads get messed up over time.

1. Open a Commnad Prompt window

(Run as Administrator by right-clicking on the executable)

and enter the following command:

C:\WINDOWS\system32> bcdedit /set

useplatformclock true

2. Verify that useplatformclock is on/true. (Run the following below and check that the result is listed as useplatformclock Yes)

C:\WINDOWS\system32>bcdedit/enum

Screen returns the following. Scroll to the lower section and confirm useplatformclock Yes

Windows Boot Manager

--------------------

...

...

Windows Boot Loader

-------------------

...

useplatformclock Yes

C:\WINDOWS\system32>

3. Restart the computer then test the SLEEP function.

Hi, try the following:

If you're using Mac OS X and want to switch to Windows, do not restart. Instead, shut down and leave the laptop for about 15 minutes to cool. Then boot Windows 10.

Also, keep a fan close to the laptop for extra cooling.

I tried these for one day. Hope this is a fix.

Hi!

Same Problem here...MacMini late2012...

C:\WINDOWS\system32>Powercfg /availablesleepstates
Die folgenden Standbymodusfunktionen sind auf diesem System verfügbar:
Ruhezustand -> Sleep -> supported
Schnellstart -> Quickstart -> supported

Die folgenden Standbymodusfunktionen sind auf diesem System nicht verfügbar:
Standby (S1)
Die Systemfirmware unterstützt diesen Standbystatus nicht.

Standby (S2)
Die Systemfirmware unterstützt diesen Standbystatus nicht.

Standby (S3)
Die Systemfirmware unterstützt diesen Standbystatus nicht.

Standby (S0 Niedriger Energiestand – Leerlauf)
Dieser Standbyzustand wird von der Systemfirmware nicht unterstützt.

Hybrider Standbymodus
Standby (S3) ist nicht verfügbar.

Standbymodes not supported,Systemfirmware does not Support S,S2,S3,S50...

Some Workaround out there?

Same problem here. The only difference is that I use windows more extensively for professional purposes.

A couple additional info if anyone can help. Apparently having your default startup disks on windows and mac os x causes some problems, but both point to my windows partition in my case. Also, my trackpad still clicks while in sleep mode, so force touch is still active. The only way I've found to restart my computer is to completely kill it by holding the power button and start over.

Windows 10 pro, upgraded from windows 8.1 pro

Bootcamp 6.0.

Latest versions of all of the above.

Richard

Same problem here. In addition entirely the same spec. MBPr mid 2015, Yosemite, Windows 10 Pro... have u found any solution?

Has anyone found any solution for this? It renders the Macbook completely unsuable under Windows. I have not shut down my Macbook in months on OS X, always just shut the lid and it went to sleep. On Windows I have to close all my apps, shut it down and then boot it uo and open everything again EVERY single time I would normally just shut the lid (which is approx. 50 times per day). It's like having to jump-start your car every single time you want to use it. Absolutely unusable... :-(

It fixed itself for me after I registered Cortana and switched my account over to an official Microsoft Account. No idea why...

This totally worked! You just saved my life! Well, you saved me from buying a Dell XPS.... 😉

Haha that's almost as bad as dying so glad I could help 😉

Same here 😟 signing in my MS account didn't help and as I'm from the Czech Republic I cannot enable Cortana yet.

This problem on my mid-2015 retina MacBook Pro (with AMD R9 M370X Graphiscs) bothers me almost a month. I've called apple support twice and the only thing they can tell is to download the Bootcamp software again form you Bootcamp assistant and reinstall it on your windows. But it's useless. When I called Apple again, they told me that they will record this problem and contact with Microsoft or some Apple department. They thought a graphics driver update may fix this problem. But Apple didn't tell me when. I've registered Cortana and used Microsoft Account as peterthegreat657 did, it's useless too. If your want to avoid this issue, please turn off the auto-sleep mode on your Windows 10 until they fix this problem. P.S. This problem may cause another: when your MacBook Pro is sleeping, it will be very hot too.

I installed new AMD display drivers specifically for Boot Camp and it appears to have resolved the issue.

Try installing the latest version (15.201 as of this post) from this URL:

http://support.amd.com/en-us/download/desktop/bootcamp

Thank you so much. It seems worked.