And I can't directly connect pc to it became it is in a very place to reach could go check on the make and model. 4 ports
If the cable modem is a router.. 4ports suggests it is.. then it should also have wireless.. please turn on the wireless in the cable router and use that for your PC running minecraft.
I am not helped a lot by your picture.. it looks like one massive blur.. a model number from the base would be far more use.
How would I figure out my broad band?
You are on cable.. now we know.
Also, where would i check the ip you're talking about? With ipconfig? What would it be under in ipconfig?
In windows open a command window.. and type the command
ipconfig /all
When you don't follow something google it.
when I google.. "how to find ipconfig"
The first post says.
Go to the start menu and select Run.... Then type cmd in the box and click OK. At the C:\> prompt type ipconfig . Then press Enter.May 18, 2010
That is how you find stuff out.. google it.
If the computer is too far away to plug into the cable modem.. then use wireless.. or if it does not use wireless.. please explain how you have it connected to the network now.
Remove the TC.. TC= Time Capsule. completely remove it from the network.. plug the computer into the modem with a long cord.. go and buy a longer cord if you don't have one.. or use wireless... and then see how you go. All port forwarding must be setup in your cable router.. please look up the model and google minecraft port forwarding with the model number of your router.
I cannot support port forwarding in routers other than apple.
Once you do all this.. you can put your Time Capsule. (TC for short) back into the network.. it has to be in bridge mode.
To preempt the next question.
You bridge the TC by selecting bridge in the airport utility.. which on windows is messy to say the least.
Don't you have an ipad or iphone.. use the airport utility for iOS.
Anyway I am able to show aprox how it looks in v5.6 utility.
Internet tab.
Connection sharing.. and pick Off (bridge mode).
The TC will then take an IP in the same range as the router. and it will begin to work correctly instead of double NAT.