Show me I have a problem when converting to Mac and Windows users system image in the following link
http://i.imgur.com/57cRATC.jpg
Try this method in the following link, but I did not understand
[urgent]get "appleSSD.sys" error when installing windows 7 through bootcamp
I ask you to help me in how to apply the method
iMac, OS X Mavericks (10.9.5), i5
Yes sir I used now, HardDisk internal for Windows PC to be an external drive for Mac drive
I've also using the previous codes with the new HardDisk HDD as the following picture:
After the completion of the steps you are trying to install Windows using Boot Camp, but the final result is as follows:
An external hard disk will not work as a substitute for a USB flash disk. You need to use a USB flash disk.
OK i will
You need one like this USB 2.0 Flash Drive .
I will try it tomorrow, good night
I've using the USB SanDisk Cruzer Blade CZ50 16GB 2.0 Flash Drive
But I did not get new results
Your USB is formatted a GUID drive. Can you erase and format it as MS-DOS FAT and then run BCA to create the USB Installer?
DearIdon't understandyour previous postpleaseexplainmore
Your /dev/disk2 shows #0 as GUID_partition_scheme. This will not work. It needs to look as follows.
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *16.0 GB disk3
1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1
Like this, my dear?
Yes, that is correct. Use BC Assistant to build the USB Installer. Your USB will be erased, formatted, renamed to WININSTALL as shown in my post.
Dear, I did what you ordered me to do exactly, but I I did not get new thing
1. Run the SMC Reset and NVRAM Reset.
2. Remove all external storage except the USB Installer.
3. Shutdown your Mac.
4. Startup your Mac and hold the Alt key.
Do you see the WININSTALL USB?
0xc0000428
