iPhone 6 Glass Screen Protectors do not work on 6s

Paco XXI wrote:

You’ve erased or managed to erase my Post of Dec 29, 2015 7:46 AM. If you erase this one, I’ll treat of letting the Community and whom I want know what this site really is, on the way and media I want.

I can't delete your posts.

You posted completely off topic, against the Terms of Service you agreed to so most likely the hosts deleted it.

"The people" want screen protectors that fit. That is the topic of this thread.

If they wanted a new device, they would (likely) get one.

The rest of your post I don't know what it means.

You have a good grasp of the English language but a lot is lost in translation.

Perhaps post in your native language and we could understand it a bit better.

yep, same problem, I have replaced mine 3 times and still doesn't seal on the top left and right corners, my 6plus never did this...so something is wrong😕

did you tried Zagg HDX?im so sorry coz i spent a lot of money to buy different brand of tempered glass like tech armor,zagg glass,spigen and panzerglass from denmark for $39 i thought the adhesive is off but when i read this thread i know that something is off in 6s not the tempered glass adhesive,i am saving my money to buy a new protector thats why i am waiting for the feedback of zagg HDX.thanks

Reasons are detailed explained in some of my previous posts. There is no solution unless replacing the screen.

Paco XXI wrote:

Reasons are detailed explained in some of my previous posts. There is no solution unless replacing the screen.

The best & easiest solution would be to purchase a screen protector that fits properly.

You can wait for Apple to change the design if you wish but that does (and will do) nothing for your current iPhone.

Apple can replace the screen with no cost in this case. Ask dealer.

Paco XXI wrote:

Apple can replace the screen with no cost in this case. Ask dealer.

Why would they replace the screen? Nothing wrong with it.
The screen protector doesn't fit.

Because there appear to be an upper corners sinking - upper left and right corners - in the screen: three different protectors presented the same fitting failure.

Obviously Apple shall check this screen defect before replacing, but will do if proceeds. The process could take about 15 days.

Unless flat surface of the new screen is wider then design, screen replacing would result in the current defect: all the tempered glass protectors will not touch the screen all around its edges a band about 2 mm wide. Anyway, it's kind better than the actual situation.

On Dec. 18^th I received my iPhone 6s, and having used ZAGG products in the past, immediately ordered their HD Glass Screen Protector. Unfortunately, I didn’t come across this thread until Dec. 28^th, at which time I emailed ZAGG’s CEO, Randall ‘Randy’ Hales, in which I referenced this thread.

That said, on Dec 29^th I received the following response from ZAGG:

“Thank you for emailing ZAGG! Our ZAGG Executive Team has read your email and has requested I respond on their behalf. My name is [deleted] and I appreciate the opportunity to assist you. I understand that you are concerned about the InvisibleShield Glass you are receiving for your Apple iPhone 6s. We have not made any changes to the InvisibleShield. If you have trouble with this InvisibleShield we can definitely change to a different InvisibleShield. We appreciate your feedback. I apologize for any inconvenience this may have caused you.”

Upon receiving my HD Glass today, Dec. 30^th, I registered and installed the protector, and as MALAVE M and others have noted, the edges DID NOT seal properly with the screen. As such, I called the local ZAGG Kiosk, and to my shock was told that this issue occurs in roughly 50% of the HD Glass installations on the iPhone 6s, which either ZAGG is not aware of, or is simply ignoring.

In view of the foregoing, I again emailed ZAGG’s CEO, and not only informed him of the issue with my iPhone 6s, but also referenced FRED BARKER’s post regarding ANKER’s Glass Screen Protector being sold on Amazon, that states “Not compatible with iPhone 6’s”. I even attached a copy of the Amazon ad for both the 6s and 6s Plus, with that statement highlighted. Additionally, I included the link to ANKER’s website, which by the way does not list any Glass Screen Protectors for either 6s model.

In short, ANKER, unlike ZAGG, immediately took action to alert their retailers of the situation, and apparently have pulled any statements on their website that the Glass Protector is compatible with both models.

I’m waiting to hear back from ZAGG, and will be visiting the local kiosk to have the HDX installed, as there have been no issues with that product and the 6s or 6s Plus, at least according to the employee or owner I spoke with.

Before anyone goes running off to MacRumor’s, AppleInsider etc., let’s wait and see what sort of response is forthcoming from ZAGG.

Excellent post! All what you've reported is happening and my estimate for your indicated 50% is it's bigger.

I recommend you read my previous posts, in some of which the reasons for the issue you've been facing are explained in detail, including physical measurements, dimensional analysis and installation photos.

Only tempered glass screen protector has issue and not compatible for iPhone 6s. I've tried Spigen Screen Protector Crystal with no issue, but when i try tempered glass from spigen,tech armor,icarez and zagg all tempered glass are having an air gap on both sides specially on top right and top left down to the bottom sides.

By design, iPhone 6 screen flat surface is only 0,11 mm wider than iPhone 6s one - almost identical. See my posts from Dec 14, 2015 2:09 AM and Dec 20, 2015 5:22 AM. In fact, Apple Store Online sell the same tempered glass protector for both.

This way, the concern couldn't be justified by the difference between them.

so what do you mean?the 3rd party for tempered glass is not the same as apple store online tempered glass?i dont think so, i think the upper right and left screen of 6s is not that flat as in the bottom,i've been observing it when i tried 5 tempered glass, spigen,zagg,icarez and panzerglass has a minimal top right and left that is not properly adhere to the screen and the bottom (home button area) is perfectly sealed but tech armor is the worst,you can see the long air gap from top to bottom on the right side.

As I've already told, if you want you can See my posts from Dec 14, 2015 2:09 AM and Dec 20, 2015 5:22 AM. There are not only the full Apple iPhone 6 and 6s product outer format specifications, including dimensional drawings, but, also, photos and a dimensional analysis.

There are no design differences between the formats of the screen upper and lower portions.

Also, if you analyse carefully this content, you're gonna understand the true issue users are facing.

As I've told, the issue is all around the protector edges, almost uniformly - photo from . Dec 14, 2015 2:09 AM