Apple Event: May 7th at 7 am PT

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Level 1

3 points

Ringer switch - turn off permanently with superglue?

Having used iPhones for some years I've found the most frustrating aspect of their design, is accidentally knocking the exposed Ringer switch (next to the volume control buttons on the side) causing myself, and I'm sure many others, to miss important phone calls.

I have tried to bring this issue to Apple's attention a number of times because it's incomprehensible to me that Apple has never offered a deactivate option for the Ringer switch.

The problem is exacerbated on my iPhone 6 Plus, because it's wider and therefore more exposed.

I have a disabled son whom I've promised I will always be available to receive a call from, anytime, so the Ringer switch to me is worse than useless and a serious liability.

Searching online it seems the only app available to stop the iPhone from turning off the ringer when it's accidentally bumped requires jail breaking the iPhone first.

Then the though of using superglue crossed my mind...

However, before doing something that radical without any idea of the possible consequences I thought it might be wise to ask whether anyone here has tried supergluing the Ringer switch 'Off' on their iPhone?

And...

Was it effective?

iPhone 6 Plus, iOS 9.1

Posted on Nov 4, 2015 3:24 AM

24 replies

snowywebb Author

Level 1

3 points

Nov 4, 2015 9:05 AM in response to Michael Black

I take your point regarding the guidelines Michael...

I like your idea re taping a custom sized block into the slot and enclosing it in a case.and will combine your idea with the case Limegrntains suggested (previous reply).

Another thought that had crossed my mind was using a grinder to reduce the height of the button to stop it protruding but that alternative risks damaging the body of the phone,

Your idea is much less radical.

Nov 4, 2015 9:10 AM in response to snowywebb

I honestly believe the switch recess is so deep, you won't have to modify anything with the metal case. I used it for a year and never switched it once. I found it difficult to switch to silent with my pinky finger when I actually wanted to put it on silent. I'm sure you'll be pleasantly surprised at how difficult it is to use the switch with the case installed. That switch access is about the only complaint people had with the case. However, with your issue, it's a good thing.

snowywebb Author

Level 1

3 points

Nov 4, 2015 10:11 AM in response to Limegrntaln

I located the model you're referring to on my local eBay (Australia) and will be ordering it shortly Limegrntain.

It is clearly more robust and rigid than my current one, which I'd chosen because it had a built in stand... not giving much thought to how significantly the rigidity could be compromised by the different design

Thank you for your advice.

Nov 4, 2015 10:13 AM in response to snowywebb

Let us know how it goes.

ChrisJ4203

Level 10

230,371 points

Nov 4, 2015 10:17 AM in response to snowywebb

Using super glue on the device would void your warranty. You could look for a case that covers the switch area. I know the Otterbox defender case has a cover over the switch that you have to move to be able to move the switch itself. You might take some time to visit places that sell cases, including the Apple Store to see if you could find something that would fit your needs. And you are correct, the setting for the switch control as described above is only for the iPad. The reason for that is because the mute switch on the iPad does not activate a vibrate function. There is no vibrate function on the iPad. That would probably be the reason they do not have that function on the iPhone.

snowywebb Author

Level 1

3 points

Nov 27, 2015 12:29 AM in response to snowywebb

Problem solved!

The Spigen case I originally bought turned out to be a counterfeit.

When I bought the one recommended by Limegrntaln it came with directions to prove it was the genuine article.

Spigen must have had some serious problems with counterfeiters to go to that amount of trouble, but its something to keep in mind if you buy one of their products... if it doesn't come with validation its rubbish.

I've had no problems since using the genuine Spigen case.

Thank you to all that offered assistance.

Nov 27, 2015 1:09 PM in response to snowywebb

Awesome!! I knew this case was the one you were looking for. I knew it was extremely hard to use the switch with this case. Im sorry you got a fake originally. And I'm happy that it worked without you ruining the phone. Glad it worked out!

snowywebb Author

Level 1

3 points

Nov 27, 2015 5:55 PM in response to Limegrntaln

Comparing the genuine with the counterfeit there's not much difference in appearance.

One stand out is inside the genuine case there is a black circle with the Spigen logo set into it, on the counterfeit it is blank.

Another difference is the ringer switch access which, on the counterfeit, is sealed over so the case has to be peeled back to see the switch position, but with the iPhone mounted in the genuine case, as you know, the switch is visible though very well protected..

Thanks again Limegrntain.

Nov 27, 2015 10:46 PM in response to snowywebb

You're welcome, snowywebb. I had a feeling that as soon as you saw what I was talking about, with the switch recess, it would probably be your answer, without mutilating an expensive phone. It ***** you got a counterfeit one, and as you can see, they're easily counterfeited by cheap eBay stores, but, a lot of times, the measurements aren't correct. Genuine Spigen, all the way. Glad it worked out and you had the faith to purchase the true product.

Ringer switch - turn off permanently with superglue?