You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
This is a constant problem, I will clean the shavings off best I can however because of the lip/ design of the lid and case you can never get rid of them all. Could I use a stronger magnet to remove the shavings and if I do will that effect any of the permanent magnets, effect antenna, W1 Chip...
Q-tips and cloths are current choice... however this again doesn't work the best.
The absolute best way to clean this off perfectly is scotch tape. Place the tape over the case magnet areas that have the metal shavings stuck on them and using a mechanical pencil with the lead retracted so you are using the plastic tip to push the scotch tape directly on to the areas with the metal shavings stuck on them. Let it sit on there for 30 seconds or so and then slowly remove the scotch tape. Viola! This works because the strength of the tape is stronger than the magnet.
Add me to the list. Mine looks just like that too. I always just thought, "Dang, my pockets are dirty!"... but now realizing it is metal... it's gotta be the hinge.
All is good!
Use tape, works for me. This is the video:Airpods case metal shavings cleaning/去除Airpods盒子上的铁削/AirPods ケースに鉄粉掃除 - YouTube
has anyone tried using an air duster to remove the shards
I have the same problem, it’s veryyyy easy to clean with a piece of scotch tape, use your fingernail to crease the tap into the inside edge on the case. Then do it a few times till it’s clean.
Metal shavings stuck to Airpods case
