Apple Intelligence is now available on iPhone, iPad, and Mac!

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

how do I access the time capsule

My time capsule is connected by ethernet to my modem but the light is blinking orange. I want the green light.

iPad 2, iOS 5.0.1, I am not able to receive or send em

Posted on Feb 15, 2018 8:43 AM

Reply
Question marked as Top-ranking reply

Posted on Feb 15, 2018 10:53 AM

A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:

  • The base station has not yet been configured because it is new, or the reset switch has been set.
  • You have selected a security configuration that is not recommended.
  • A new firmware update is available for the base station.
  • One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.

AirPort base stations: About AirPort base station status lights (LED) - Apple Support


To find out why your base station's status LED is flashing amber:

  • Open AirPort Utility
  • Click on the AirPort base station
  • Look for a Status setting in the small window that appears. Note: Status only appears if there is an issue or notification.
  • Click on the small amber dot there and another window will open to explain what the "issue" might be.
1 reply
Question marked as Top-ranking reply

Feb 15, 2018 10:53 AM in response to alfred77

A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:

  • The base station has not yet been configured because it is new, or the reset switch has been set.
  • You have selected a security configuration that is not recommended.
  • A new firmware update is available for the base station.
  • One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.

AirPort base stations: About AirPort base station status lights (LED) - Apple Support


To find out why your base station's status LED is flashing amber:

  • Open AirPort Utility
  • Click on the AirPort base station
  • Look for a Status setting in the small window that appears. Note: Status only appears if there is an issue or notification.
  • Click on the small amber dot there and another window will open to explain what the "issue" might be.

how do I access the time capsule

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.