​​ ​

The Apple Support Community will permanently close on November 20, 2026. Starting today, the site will no longer accept new posts and is available in a read-only state.


You can continue to find trusted guidance and support on the official Apple Support site. 


We want to thank the community members who have contributed their time and expertise to help others with their Apple products.


Turn Off Field Test Mode

My iPhone 4 "inherited" the Field Test Mode from my 3GS (that had been upgraded to iOS4) when I brought across my apps from the 3GS. Field Test Mode with iOS4 seems to operate on an app by app basis, rather than being able to set the signal strength bars or the dB reading and staying in the selected mode for all apps until changed.

So, after numerous searches, I can't find a clear, definitive way to turn off or delete Field Test Mode. I've tried to reset network settings and the usual reboot, etc.

I've passed on a total reset because the Field Test capability was passed from by 3GS backup to the iPhone 4.

Anyone have a clue?

iPhone 4, Mac OS X (10.6.4)

Posted on Jun 27, 2010 3:54 PM

Question marked as Top-ranking reply

Posted on Sep 24, 2012 6:35 PM

I know I am a few years late but I had this problem on my phone and I fixed it.


I activated FTM on iPhone 4 iOS 5.1 and upgraded to iOS 6 and couldn't turn it off .. So this is what I did..


DO NOT DIAL THE CODE MANUALLY. Open "Notes" and create a new note, type *3001#12345#*, then copy it.


Open Phone, dialpad and PASTE the code then press CALL. Once you enter Field Test Mode, press the db to return back to signal bars and press and release (do not hold) the Home button.


This fixes this bloody problem once and for all.


Cheers!

54 replies
Question marked as Top-ranking reply

Sep 24, 2012 6:35 PM in response to Tom Gentry

I know I am a few years late but I had this problem on my phone and I fixed it.


I activated FTM on iPhone 4 iOS 5.1 and upgraded to iOS 6 and couldn't turn it off .. So this is what I did..


DO NOT DIAL THE CODE MANUALLY. Open "Notes" and create a new note, type *3001#12345#*, then copy it.


Open Phone, dialpad and PASTE the code then press CALL. Once you enter Field Test Mode, press the db to return back to signal bars and press and release (do not hold) the Home button.


This fixes this bloody problem once and for all.


Cheers!

Jul 18, 2010 6:49 PM in response to Michael Empire

MichaelEmpire wrote:
Please tell me how on 3.1.2 ( Factory Unlocked ) to keep DBm not Bar for signnal after exiting Fielt Test Mode . Thank you.

When you're in field test mode, you hold the power key until the "Slide to Power Off" shows up. Now hold the home button until it resprings. You will now ALWAYS have the dB meter, even through updates. The only way to remove it is to restore as a new phone.

If you get an upgraded phone model and restore it with a backup from one of these phones that have the dB meter, you will transfer the dB meter to it.

Jul 18, 2010 7:02 PM in response to EBSkater

EBSkater, do you think this is the way AnandTech got their i4 to display the db signal? They didn't detail their "trick".

EBSkater wrote:
MichaelEmpire wrote:
Please tell me how on 3.1.2 ( Factory Unlocked ) to keep DBm not Bar for signnal after exiting Fielt Test Mode . Thank you.

When you're in field test mode, you hold the power key until the "Slide to Power Off" shows up. Now hold the home button until it resprings. You will now ALWAYS have the dB meter, even through updates. The only way to remove it is to restore as a new phone.

If you get an upgraded phone model and restore it with a backup from one of these phones that have the dB meter, you will transfer the dB meter to it.

Aug 22, 2015 7:29 AM in response to Tom Gentry

Hi

From my own experience to go back from dB signal strength to bars follow these steps:


1. Dial *3001#12345#* and hit call.

2. Field test mode opens then toggle signal strength from dB to bars.

3. Just press the home button long enough so that it automatically takes you to the home screen.


And voilà , appear the beautiful bars. 😀

Nov 19, 2013 5:55 PM in response to Madentist

I have an idea.. Backup your phone to iTunes and then erase all settings, do a full reset. Once the phone is done, try the procedure. If it works, go ahead and restore.


If it does not work, download a fresh copy of iOS 7.0.4 and install it, then try. If successfull, do a restore.


Remember this is more likely an iOS glitch and nothing to do with the ID or backup.


If it doesn't work and if you are under the Apple warranty (you probably are), go to an Apple store and swap the phone for another one. Let me know!!

Nov 19, 2013 5:45 PM in response to Madentist

You're not bothering me. Let's try this again.


You opened notes and copied the code? You opened phone, dialpad and pasted the code? Pressed call and entered... FTM


Once you entered FTM mode, you touch the db on top and they turn to bars, right? Then you pressed and released (did not hold) the home button? This all did not work?


If it didn't work, I don't think the issue is the apple ID, I think it may be a glitch in the iOS itself.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Turn Off Field Test Mode

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.