Mac mini (mid 2010)grey startup screen

Question

Level 1

8 points

Mac mini (mid 2010)grey startup screen

My Mac has developed a problem where it has the solid grey screen on start up no apple logo or loading bar it doesn’t get that far.

Ive tried the following but the grey screen stays:

reset pvram

boot into into recovery mode (doesn’t boot into it grey screen stays)

boot into safe mode (see above)

select bootable startup (see above)

command+v (can’t remember what boot mode this is - see above)

unplug power for 30secs replug for 5secs power on still the same

anything else I could try? This was what I could find from a google search

thanks

Posted on Sep 2, 2019 7:02 AM

Reply

Answer 1

Top-ranking reply

den.thed

Level 10

82,540 points

Sep 2, 2019 7:55 AM in response to Matty1080

Sounds like maybe the Hard Disk has failed.

If you can not startup in recovery, to repair or reinstall, as per > About macOS Recovery - Apple Support

You can always startup from the original 10.6 Snow Leopard Disc 1 that came with your Mac Mini.

Go to Apple > Utilities > Disk Utility and see if you can Repair your Macintosh HD.

Reply

Answer 2

macjack

Level 10

111,204 points

Sep 2, 2019 8:37 AM in response to Matty1080

Try Single User Mode (hold command-s keys)

At the prompt, enter this command:

/sbin/fsck -fy

Press the Return key.

This will check your directory and report that it was OK or repaired. Then enter this command to startup normally:

reboot

Reply

Answer 3

macjack

Level 10

111,204 points

Sep 2, 2019 10:13 AM in response to Matty1080

Try booting from the original DVD disc holding the c key. If the hard drive is the problem then it should boot from the disc as that uses a separate system from the hard drive. Or, if you have another disk with a system on it, try that.

Reply

Answer 4

den.thed

Level 10

82,540 points

Sep 2, 2019 11:26 AM in response to Matty1080

Matty1080 wrote:

But it doesn’t boot, so I wouldn’t be able to even boot from the disc?

That's not necessarily true. You should still be able to startup from the original install disc or an external disk that has macOS or a macOS installer loaded on it.

If you are using a wireless keyboard to input startup commands?

It may no longer be paired with your Mac and you need to use a wired USB keyboard.

(most any Apple, generic or windows USB keyboard will work)

Then if you are still unable to startup in any of the above mentioned modes, then you will need to make a service appointment with your local Apple Authorized Service Provider.

Reply