AirPods Pro indicator doesn't work while not charging, it only works when I plug the lighting cable. So I can't check the battery status on the go
Go ahead and open a case with Apple. That firmware seems to of been pulled due to bugs. But it’s possibly a software or hardware issue. So open the case with Apple
It didn't help :( The firmware is 2c54
If you press the back button once, the light show light up for 2-3 seconds ONLY. Is it not doing this?
Try the below steps. If it still won't indicate the power status when pressing the button, you will need to contact Apple Support.
Try a full re-pair, reset, and try again.
Start with Unpairing/"Forgetting" the Device:
Settings > Bluetooth > Airpods > Forget this device. Confirm it.
Put both Airpods in their case, charge them via Lightning for a few minutes (or preferably until the case is 100%). Unplug them. Open the case and hold the button on the back of the case for 15+ seconds or until the light flashes white. Hold them near your iPhone and see if the pairing screen comes up and pair them. If not, repeat until it does. But if you can't see the screen pop up, then manually pair within Bluetooth.
If it doesn't work, open a case with Apple Support here: https://support.apple.com/airpods
Also please let me know the Firmware Version if it doesn't work:
Settings > General > About > AirPods > Firmware Version
AirPods Pro indicator
