Magic Mouse 1 not scrolling

Just updated my iPad Pro to iPadOS 13.4, and was able to pair my Magic Mouse 1 to it. Point and click work just fine, however can't get scrolling gesture to work. Is this a known bug or is it just me ?

iPad Pro 10.5-inch, Wi-Fi

Posted on Mar 24, 2020 1:16 PM

Reply
Question marked as Top-ranking reply

Posted on Apr 2, 2020 2:55 AM

Apple documentation is very clear as to the user interface devices supported by the iPadOS 13.4 update. The Apple Magic Keyboard, Magic Mouse 2 and Magic Trackpad 2 all have full support - plus generic support is added for third-party input devices.


The original Magic Mouse and Trackpad were not designed or intended to operate with iPadOS - and whilst not supported by iPadOS, remain fully operable with the Mac computers for which they were designed to operate.


Generic device support provides basic input functionality. For example, many Mice require a manufacturer-supplied “driver” to be installed to enable additional “buttons” (beyond the basic/generic left/right mouse-buttons) and any proprietary “touch” functionality. Additional device driver installation is not (and never has been) supported on iOS platforms. For this reason, basic devices, such as a “basic” mouse seem to have full OS support - whereas a feature-rich Mouse (with many bells-and-whistles) only provides its basic functions when connected to iPad.


Many here are clearly disappointed in that the older-generation Magic Mouse/Trackpad, expressly designed for Mac, are not supported by iPadOS - however, all computing systems have limits as to the type of devices that it can support. Older hardware and devices are often not forward-compatible with new operating systems.

Similar questions

96 replies

Jun 9, 2020 4:44 PM in response to rmm74

I have a Magic Mouse 1 which I purchased in December 2009 and I can still scroll. With your finger drag your finger in a downward motion to scroll it towards the bottom and to scroll upwards then push your finger upward to scroll up. Also when replacing your AA batteries with new ones. Open the back cover and take out the old AA batteries. Be sure to use a q-tip to rub the (+) and the (-) where the AA battery sits in the battery slots. All AA battery leaves a battery residue so when you rid of the battery residue then your mouse is good to go. If you don't clean of the AA battery residue then your magic mouse will be sluggish.

Apr 4, 2020 3:32 PM in response to LotusPilot

I started my Mac life on one of the first “Pizza box” Macs in the late 1980’s, early 1990’s.

Used it for DTP and multimedia work when PageMaker was NOT yet owned by Adobe.

I believe PageMaker was designed, developed and owned by a company called Claris, back then.

For multimedia work way back on that Mac, I was using a Mac program called Authorware

Apr 24, 2020 11:26 PM in response to MichelPM

Hah! No apology needed, and I hope I am not getting you riled. Suggestion - read the following 📝 with this recent untouched photo of me in mind: 🤓 Yes, I know I am slightly jaundiced. No need to point it out.


**Again...we do not know if this feature (Magic Mouse 1) will work with iPad in the future. That is up to 🍎 


You really should not speculate on Apple’s decisions (TOU 2. (1.) (2.))...you might be proven wrong...like some were when they were outspoken about the iPad mouse/trackpad support not ever going to happen...and of course...it is here. 


Not only do people want and use this new functionality they want to improve upon it. 


I understand your perspective...(abridged) “old technology, move on”. Got it. Everyone gets it. You have been very clear with personal anecdotes and factoids that support your position in an attempt to educate people to reality and your personal biases. I hope you can understand other perspectives which do not align with yours. They are simply advocating for more utility that suits them. Of course you can debate the value of that utility...and you have, albeit from a biased perspective. 


You truly are a help to so many people on these forums (including me). Can you please let others share their frustrations without dismissing or attempting to invalidate their thoughts. Maybe even try to empathize with them/their frustrations. Their frustrations are a valid form of constructive criticism. 


Something like...”I honestly do not know what Apple’s reasoning to not support the Magic Mouse 1 yet. Many people share your frustration and hopefully Apple will support the Magic Mouse 1 and Magic Trackpad 1 in the near future. In the meantime maybe you could take the time to leave feedback for Apple here... https://www.apple.com/feedback/ipad.html 


🤓

May 8, 2020 2:38 PM in response to Luka264

100% agree. What’s the point of using the mouse if I have to tap on my iPad just to scroll up or down. Basically makes the mouse obsolete. In fact tapping with the ipad is easier than clicking with the mouse! So scrolling should be the #1 feature used by the mouse! I want to be able to scroll from home page to home page (left/right between my apps) with the iPad too.


Also, the double tap feature that normally puts you in expose on the MacBook is just absent. Why??? I suspect a new Apple mouse being released soon they as always they want to make our current products out of use and requiring an update.

May 21, 2020 8:12 AM in response to Khoukharev

Apple cannot force you to do anything. We have the power of choice over which technology we upgrade and which we don't, but logically, because technology itself is not static, at some point there will be limitations, and that's where choice -- and personal responsibility -- comes in.


I am making the choice to stick with my older magic mouse first gen while using my iPad Pro. I'm just using modifications to scroll. It's not Apple's responsibility to cater to my choices, nor is it the world's responsibility to stop the progression of technological innovation because I want them to figure out how to make my magic mouse 1st gen, something created 11 years ago, to do everything a 2nd gen can do with my iPad. It's my responsibility to either find solutions and workarounds or choose to upgrade or whatever.


I choose to drive an older car. Is it the car dealer's fault that I don't have built-in GPS or other next-gen tech in my car? No, it's just reality. When the car manufacturer designed my car, did they have some foresight that it would be lacking in certain features that would become available in the future? Maybe in a Sci-Fi novel, but likely not reality.


I use my technology until it starts using me. It's just how I'm wired. Until Feb of 2019 I was using a 27" 2011 iMac that couldn't upgrade. The graphics card finally died and I got a 2015 27" from my local premium provider that runs flawlessly. I fail to see how my using the life out of a 27" 2011 iMac is planned obsolescence or somehow Apple's fault, in the same way that I fail to see how using a mouse designed for 11yo technology is planned obsolescence or irresponsibility or forcing of anything.


We all have the choice to go through life assuming that everyone else is "going out of their way to cut off users" or "not wanting to do additional work" or we could exercise some measure of personal responsibility and find a healthy balance. And that is probably the most important choice of all.


May 21, 2020 8:31 AM in response to Khoukharev

Talk to the third party app developers.

They are the ones who do not want to support 8 and 9-year old Apple mobile devices, any longer.

Not just Apple.


AND, how long do you think Apple should support their older mobile devices for?


Apple supports new iPad models for up to 5-6 years with third party app developers supporting these unsupported iPads for another, additional 2-3 years after!

So, that is a total of between 7-9 years of iPad/iOS support!

Other device maker and other mobile operating systems and their app developers offer a whole lot less support time than Apple!

Older iPad models, like the iPad 2, 3, 4 and 1st gen iPad Mini have ALL reached this support limit!


I have been telling users here this inevitabilty was coming for the past 4 years that older iPad models were going to come to an end after Apple introduced its new 64-bit code iOS versions back in 2016, with the introduction of iOS 11.


But everyone who had older iPads then decided to keep using them until the final, bitter end.

Well, the end of these old iPad 1, 2, 3, 4 and 1st gen iPad Mini models is now here!

All support has ended.

If these old iPad models all still have apps older apps on them, then these old iPads should still be able to be used and function at some level.


If these device try and get used as a new or reset device, these old iPads ard done!


No Personal technology maker and app developer is going to support their devices forever! Not gonna happen!



May 21, 2020 9:29 AM in response to mj_ali

Look, you do realize that you’re answering an argument different from mine, right?


Its one thing if technology evolved and Apple decided not to spend resources to support it in newer products (this is what you’re answering to). It’s different thing if Apple decided to devote resources specifically to disable older equipment (in this case MM1), so that people have to buy newer one. I’m looking down on Apple for doing the latter.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Magic Mouse 1 not scrolling

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.