"Your computer was restarted because of a problem." AppleIntelFramebuffer::setPowerState

A Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later

You should try each, one at a time, then test to see if the problem is fixed before going on to the next.

    Be sure to backup your files before proceeding if possible.

1. Shutdown the computer, wait 30 seconds, restart the computer.
2. Disconnect all third-party peripherals.
3. Resetting your Mac's PRAM and NVRAM
4. Reset the System Management Controller (SMC)
5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
8. Repair permissions on the Home folder: Resolve issues caused by changing the permissions of items in your home folder.
9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
10. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
11. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:

     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.

Do you have any third-party USB peripherals connected?

Dealing with Kernel Panics

Disconnect any third-party peripherals including any USB hubs. How to use safe mode on your Mac, Use safe mode to isolate issues with your Mac - Apple Support then boot the computer into Safe Mode: Use safe mode to isolate issues with your Mac - Apple Support and Playing Safe- what does Safe mode do? See Diagnosing problems- crash, freeze, panic, or spinning beach ball?, Don’t Panic! Understanding & Troubleshooting Kernel Panics in macOS, How to fix kernel panics after installing OS X updates | MacIssues, and If your Mac restarted because of a problem - Apple Support.

Kernel panics are indicative of possible hardware failure, so you should Check your Mac with hardware diagnostics or AHT. Kernel panic logs are found in: /Library/Logs/DiagnosticReports/ folder.

If you have no success figuring what is happening then you may need to examine the software you have running when the panics occur. Be sure it’s all current. If you must to resolve the problem erase the disk and reinstall macOS. Follow this outline to reset the computer to the factory-new state: Factory reset of your Mac - Apple Support.

Boot Into Safe Mode

1. If your Mac isn’t already shut down, then shut it down and wait at least 30 seconds before rebooting.
2. Immediately, at or before the chime, press and hold down the SHIFT key. 
3. Release the key after the Apple logo and progress bar appear.
4. Safe mode startup is much slower than normal startup, so be patient.
5. When the Login Screen appears enter your admin password. If you use automatic login, then this means you are in safe mode.

I highly suspect it's because the 10.15.4 update. There are so many people having the exact same issue ever since the update was released. I'm using two DB to usbc adapter and a usb hub which all of them working great before the update. And now I had to resort to disable automatic sleep to prevent this from happening.

This update really dropped the ball here and I'm surprised there hasn't been a fix yet.

This also began happening to me a few days ago. I usually sleep my 16" MBP attached to my external time machine drive via the Apple USB-C to HDMI/USB/Power dongle. Will try leaving it with just power plugged in to see if it helps.

Having this exact same issue on a brand new 16" MBP. Two days old and constant restarts when going to sleep or coming out of it, or plugging in the power brick. Fully up to date.

This has to be a bug.

https://discussions.apple.com/thread/251223341?page=3 This thread says disabling power nap fixes it.