michael-tct Author

Level 1

8 points

Airport Express Default Host

Is port forwarding redundant if pointing toward your Default Host?

AirPort

Posted on May 25, 2020 2:55 PM

Reply

Similar questions

Can't put AirPort Express into client mode. I followed the instructions for putting an AirPort Express into client mode (https://support.apple.com/en-us/HT201621 for AirPort Utility 6) and my AirPort Express ended up extending the network instead of operating in client mode. What could I be doing wrong?
1517 8
Is NAT required on ethernet connected roaming network? Do I need to use Router Mode DHCP and NAT when using DHCP Reservations and a Static address on the AP Express base station? The AP Express is connected to the AP Extreme via ethernet cable. Bonus questions... ==== Is it more secure to leave NAT Port Mapping Protocol unchecked, what are the repercussions? I am trying to understand why port 80 and 443 are always open and how to close them, according to Gibson Research this is dangerous... ? I can't find any logs for my AirPort Extreme. I looked in /var/logs. Where are they? ==== I have an AirPort Extreme: Internet Connect using: DHCP Wireless Network Mode: Create a wireless network Network Router Mode: DHCP and NAT DHCP Reservations: I use MAC address to assign IP addresses to all devices in my home. Network Options Enable NAT Port Mapping Protocol Unchecked and an AirPort Express Internet Connect using: Static Wireless Network Mode: Create a wireless network Network Router Mode: Off (Bridge Mode)
485 3
Make airport express 2 work as router and extend to other routers Hi. sorry for my bad techical knowledge in the description. I've connected my airport express 2 to my main routers LAN1 channel - and this works fine: i have wireless connection from both of them. However when i try to connect a third router to the aiport the internet acces switches between the three routers and i cannot make it work on all three at once. I suspect that it's because i don't have the right configuration on the airport. Does anybody know this issue and have a solution? Kind regards - Victor
1038 4

4 replies

michael-tct Author

Level 1

8 points

May 27, 2020 8:45 PM in response to Tesserax

Thanks Tesserax!

Reply

May 25, 2020 3:09 PM in response to michael-tct

Port forwarding is not required on local LAN.

Reply

Level 10

157,902 points

May 28, 2020 9:15 AM in response to michael-tct

You're very welcome!

Reply

Level 10

157,902 points

May 25, 2020 5:52 PM in response to michael-tct

When configured for a "default host," that host is fully exposed to the Internet. Port mapping would serve no purpose in this case. On the other hand, port mapping would be used in cases where you only want select ports to be open for that same host.

Reply

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Airport Express Default Host

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up