Freeze on Login after upgrade to El Capitan

Question

Level 1

0 points

Freeze on Login after upgrade to El Capitan

I upgraded my macbook Air today to El Capitan, however it freezes on Login screen after upgrade. I was able to boot on safe mode and login successfully.

Please help!!!

MacBook Air, OS X El Capitan (10.11)

Posted on Oct 1, 2015 2:29 PM

Reply

Answer 1

Best reply

Linc Davis

Level 10

209,547 points

Oct 1, 2015 3:08 PM in response to dnaga

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.

Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the requisite skill can verify what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.

Another indication that the test is safe can be found in this thread, and this one, for example, where the comment in which I suggested it was recommended by one of the Apple Community Specialists, as explained here.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a general summary of what you need to do, if you choose to proceed:

☞ Copy a particular line of text to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.

5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is intermittently slow, run the test during a slowdown.

You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual before running it. If you can only test in safe mode, do that.

6. If you have more than one user, and only one user is affected by the problem,, and the affected user is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.

If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.

If the test is taking much longer than usual to run because the computer is very slow, you might be prompted for your password a second time. The authorization that you grant by entering it expires automatically after five minutes.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:

[Process started]

Part 1 of 8 done at … sec
…
Part 8 of 8 done at … sec

The test results are on the Clipboard.

Please close this window.

[Process completed]

The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.

Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step. You'll have incomplete results, but still something. If you close the Terminal window while the test is still running, the partial results won't be saved and you'll have to start over.

12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been saved to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the software that runs this website. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.

______________________________________________________________

Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Reply

Answer 2

Oct 2, 2015 8:15 AM in response to Linc Davis

1 Start time: 09:50:33 10/02/15

2

3 Revision: 1348

4

5 Model Identifier: MacBookAir6,2

6 Memory: 4 GB

7 System Version: OS X 10.11 (15A284)

8 Kernel Version: Darwin 15.0.0

9 Boot Mode: Safe

10 Time since boot: 45 minutes

11

12 UID: 504

13

14 Spotlight: Indexing and searching disabled

15

16 Global prefs (system)

17

18 MultipleSessionEnabled = 1

19

20 Firewall: On

21

22 Listeners

23

24 launchd: dec_dlm

25

26 lost+found

27

28 iNode5506915 xar archive - version 1 (5668704673 B)

29 iNode6627712 xar archive - version 1 (6081795289 B)

30

31 Diagnostic reports

32

33 2015-10-01 SystemUIServer crash

34 2015-10-01 WindowServer crash x4

35 2015-10-01 gamed crash

36

37 HID errors: 13

38

39 Kernel log

40

41 Oct 1 18:23:47 Can't load kext org.virtualbox.kext.VBoxNetAdp - failed to resolve library dependencies.

42 Oct 1 18:23:47 Kext org.virtualbox.kext.VBoxNetAdp failed to load (0xdc00800e).

43 Oct 1 18:25:19 considerRebuildOfPrelinkedKernel com.apple.iokit.IOGraphicsFamily triggered rebuild

44 Oct 2 08:02:21 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x5c14c06e73c12a93, provider is 0x5c14c06e14017893

45 Oct 2 08:02:21 init: error getting PHY_MODE; using MODE_UNKNOWN

46 Oct 2 08:02:25 Can't load kext org.virtualbox.kext.VBoxUSB - failed to resolve library dependencies.

47 Oct 2 08:02:25 Kext org.virtualbox.kext.VBoxUSB failed to load (0xdc00800e).

48 Oct 2 08:02:25 Can't load kext org.virtualbox.kext.VBoxNetFlt - failed to resolve library dependencies.

49 Oct 2 08:02:25 Kext org.virtualbox.kext.VBoxNetFlt failed to load (0xdc00800e).

50 Oct 2 08:02:26 Can't load kext org.virtualbox.kext.VBoxNetAdp - failed to resolve library dependencies.

51 Oct 2 08:02:26 Kext org.virtualbox.kext.VBoxNetAdp failed to load (0xdc00800e).

52 Oct 2 08:03:59 considerRebuildOfPrelinkedKernel com.apple.iokit.IOGraphicsFamily triggered rebuild

53 Oct 2 08:07:59 kauth external resolver timed out (1 timeout(s) of 60 seconds).

54 Oct 2 08:54:16 Sleep failure code 0x00000000 0x1f006500

55 Oct 2 08:54:21 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x892ce10c8a405839, provider is 0x892ce10c2abe2c39

56 Oct 2 08:54:21 init: error getting PHY_MODE; using MODE_UNKNOWN

57 Oct 2 08:54:25 Can't load kext org.virtualbox.kext.VBoxUSB - failed to resolve library dependencies.

58 Oct 2 08:54:25 Kext org.virtualbox.kext.VBoxUSB failed to load (0xdc00800e).

59 Oct 2 08:54:25 Can't load kext org.virtualbox.kext.VBoxNetFlt - failed to resolve library dependencies.

60 Oct 2 08:54:25 Kext org.virtualbox.kext.VBoxNetFlt failed to load (0xdc00800e).

61 Oct 2 08:54:26 Can't load kext org.virtualbox.kext.VBoxNetAdp - failed to resolve library dependencies.

62 Oct 2 08:54:26 Kext org.virtualbox.kext.VBoxNetAdp failed to load (0xdc00800e).

63 Oct 2 09:08:56 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x4de0edcc6f9931ad, provider is 0x4de0edcc0fd6fead

64 Oct 2 09:08:56 init: error getting PHY_MODE; using MODE_UNKNOWN

65 Oct 2 09:10:42 considerRebuildOfPrelinkedKernel com.apple.kext.triggers triggered rebuild

66

67 System log

68

69 Oct 2 09:49:45 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

70 Oct 2 09:49:55 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

71 Oct 2 09:49:55 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

72 Oct 2 09:49:55 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

73 Oct 2 09:50:05 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

74 Oct 2 09:50:05 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

75 Oct 2 09:50:05 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

76 Oct 2 09:50:15 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

77 Oct 2 09:50:15 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

78 Oct 2 09:50:15 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

79 Oct 2 09:50:25 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

80 Oct 2 09:50:25 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

81 Oct 2 09:50:25 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

82 Oct 2 09:50:35 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

83 Oct 2 09:50:35 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

84 Oct 2 09:50:35 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

85 Oct 2 09:50:45 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

86 Oct 2 09:50:45 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

87 Oct 2 09:50:45 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

88 Oct 2 09:50:55 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

89 Oct 2 09:50:55 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

90 Oct 2 09:50:55 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

91 Oct 2 09:51:05 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

92 Oct 2 09:51:05 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not open connection with the kernel watchdog

93 Oct 2 09:51:05 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

94

95 launchd log

96

97 Oct 1 15:25:49 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

98 Oct 1 16:00:59 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

99 Oct 1 16:11:08 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

100 Oct 1 16:18:53 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

101 Oct 1 16:33:32 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

102 Oct 1 16:42:41 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

103 Oct 1 16:58:47 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

104 Oct 1 17:43:20 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

105 Oct 1 18:03:54 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

106 Oct 1 18:21:57 com.apple.xpc.launchd.domain.user.0: Caller not allowed to perform action: loginwindow.1113, action = query service enabled state, code = 1: Operation not permitted, uid = 0, euid = 201, gid = 201, egid = 201, asid = 100045

107 Oct 1 18:23:34 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.

108 Oct 1 18:23:35 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

109 Oct 2 08:02:16 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.

110 Oct 2 08:02:16 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

111 Oct 2 08:54:15 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.

112 Oct 2 08:54:16 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

113 Oct 2 09:08:51 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.

114 Oct 2 09:08:51 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose

115

116 Console log

117

118 Oct 2 09:09:45 fontd: Failed to compile sql statement (90), "DELETE FROM font_table WHERE font_column == ?;"

119 Oct 2 09:09:45 fontd: Failed to compile sql statement (91), "DELETE FROM dir_table WHERE dir_column == ?;"

120 Oct 2 09:09:45 fontd: Failed to compile sql statement (92), "UPDATE OR ABORT font_table SET flags_column == ( flags_column & ?) | ? WHERE font_column == ?;"

121 Oct 2 09:09:45 fontd: Failed to compile sql statement (93), "UPDATE OR ABORT dir_table SET flags_column == ( flags_column & ?) | ? WHERE dir_column == ?;"

122 Oct 2 09:09:45 fontd: Failed to compile sql statement (94), "INSERT INTO name_table VALUES( ?, ?, ? );"

123 Oct 2 09:09:45 fontd: Failed to compile sql statement (95), "INSERT INTO family_table VALUES( ?, ?, ? );"

124 Oct 2 09:09:45 fontd: Failed to compile sql statement (96), "INSERT INTO subfamily_table VALUES( ?, ?, ? );"

125 Oct 2 09:09:45 fontd: Failed to compile sql statement (97), "INSERT INTO fullname_table VALUES( ?, ?, ? );"

126 Oct 2 09:09:45 fontd: Failed to compile sql statement (98), "INSERT OR REPLACE INTO traits_table VALUES( ?, ?, ?, ?, ? );"

127 Oct 2 09:09:45 fontd: Failed to compile sql statement (99), "INSERT INTO loc_names_table VALUES( ?, ?, ?, ?, ?, ?, ?, ?, ? );"

128 Oct 2 09:09:45 fontd: Failed to compile sql statement (100), "INSERT OR REPLACE INTO charset_table VALUES( NULL, ? );"

129 Oct 2 09:09:45 fontd: Failed to compile sql statement (101), "INSERT INTO unicoderanges_table VALUES( ?, ?, ?, ?, ? );"

130 Oct 2 09:09:45 fontd: Failed to compile sql statement (102), "INSERT INTO language_table VALUES( ?, ?, ? );"

131 Oct 2 09:09:45 fontd: Failed to compile sql statement (103), "INSERT INTO varaxis_table VALUES( ?, ?, ?, ?, ?, ?, ? );"

132 Oct 2 09:09:45 fontd: Failed to compile sql statement (104), "INSERT INTO varinstance_table VALUES( ?, ?, ? );"

133 Oct 2 09:09:45 fontd: Failed to compile sql statement (105), "INSERT OR REPLACE INTO lwfn_table VALUES( ?, ? );"

134 Oct 2 09:09:45 fontd: Failed to compile sql statement (106), "INSERT INTO psname_aliases_table VALUES( ?, ?, ? );"

135 Oct 2 09:09:45 fontd: Failed to compile sql statement (107), "INSERT OR REPLACE INTO format_table VALUES( ?, ? );"

136 Oct 2 09:09:45 fontd: Failed to create font store at path /var/folders/jp/2ytyvzdx7w92qfj5jfgg18qw0000gr/C/com.apple.FontRegistry/fontreg istry.user, trying alternative

137 Oct 2 09:09:45 fontd: Failed to create alternative font store at path /tmp/fontregistry.user, falling back to in-memory store

138 Oct 2 09:09:46 fontd: XType - wal checkpoint: 0, -1, -1.

139 Oct 2 09:36:35 storeaccountd: XPC error for connection com.apple.backupd.sandbox.xpc: Connection invalid

140 Oct 2 09:36:35 storeaccountd: XPC error for connection com.apple.backupd.sandbox.xpc: Connection invalid

141 Oct 2 09:36:35 storeaccountd: XPC error for connection com.apple.backupd.sandbox.xpc: Connection invalid

142 Oct 2 09:36:35 storeaccountd: XPC error for connection com.apple.backupd.sandbox.xpc: Connection invalid

143

144 Loaded kernel extensions

145

146 com.kaspersky.kext.klif (3.0.4a41) UUID

147

148 System services loaded

149

150 com.apple.logd

151 - status: 1

152 com.apple.watchdogd

153

154 System services disabled

155

156 _dirty

157 com.apple.mdmclient.daemon.runatboot

158

159 Login services disabled

160

161 com.apple.ManagedClientAgent.enrollagent

162

163 User services disabled

164

165 com.apple.ManagedClientAgent.enrollagent

166

167 User login items

168

169 iTunesHelper

170 - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app

171

172 Firefox extensions

173

174 Mozilla Firefox hotfix

175

176 iCloud errors

177

178 cloudd 69

179 comapple.CloudPhotosConfiguration 31

180 comapple.InputMethodKit.TextReplacementService 8

181 cloudphotosd 8

182 Finder 4

183 bird 1

184

185 Continuity errors

186

187 sharedfilelistd 22

188 sharingd 9

189

190 Restricted files: 234812

191

192 Lockfiles: 24

193

194 Global prefs (user)

195

196 AppleActionOnDoubleClick = Maximize

197

198 Contents of /Library/LaunchAgents/com.kaspersky.kav.gui.plist

199 - mod date: Oct 1 16:59:04 2015

200 - size (B): 667

201 - checksum: 2831085550

202

203 <?xml version="1.0" encoding="UTF-8"?>

204 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

205 <plist version="1.0">

206 <dict>

207 <key>Label</key>

208 <string>com.kaspersky.kav.gui</string>

209 <key>ProgramArguments</key>

210 <array>

211 <string>/Library/Application Support/Kaspersky Lab/KAV/Applications/Kaspersky Anti-Virus Agent.app/Contents/MacOS/kav_agent</string>

212 <string>-autolaunch</string>

213 <string>1</string>

214 </array>

215 <key>RunAtLoad</key>

216 <true/>

217 <key>ServiceIPC</key>

218 <false/>

219 <key>WatchPaths</key>

220 <array>

221 <string>/Library/Application Support/Kaspersky Lab/KAV/kickstart_gui</string>

222 </array>

223 </dict>

224 </plist>

225

226 Contents of /Library/LaunchDaemons/com.kaspersky.kav.plist

227 - mod date: Oct 1 16:59:04 2015

228 - size (B): 830

229 - checksum: 1118839448

230

231 <?xml version="1.0" encoding="UTF-8"?>

232 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

233 <plist version="1.0">

234 <dict>

235 <key>Label</key>

236 <string>com.kaspersky.kav</string>

237 <key>ProgramArguments</key>

238 <array>

239 <string>/Library/Application Support/Kaspersky Lab/KAV/Binaries/kav</string>

240 <string>-r</string>

241 <string>-bl</string>

242 </array>

243 <key>RunAtLoad</key>

244 <true/>

245 <key>ServiceIPC</key>

246 <false/>

247 <key>StandardErrorPath</key>

248 <string>/var/log/kav_daemon_stderr.log</string>

249 <key>StandardOutPath</key>

250 <string>/var/log/kav_daemon_stdout.log</string>

251 <key>KeepAlive</key>

252 <dict>

253 <key>SuccessfulExit</key>

254 <false/>

255 </dict>

256

257 ...and 6 more line(s)

258

259 Contents of /Library/LaunchDaemons/org.virtualbox.startup.plist

260 - mod date: Nov 11 19:13:51 2014

261 - size (B): 76

262 - checksum: 3094394405

263

264 <?xml version="1.0" encoding="UTF-8"?>

265 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

266 <plist version="1.0">

267 <dict>

268 <key>Label</key> <string>org.virtualbox.startup</string>

269 <key>Disabled</key> <false/>

270 <key>RunAtLoad</key> <true/>

271 <key>KeepAlive</key> <false/>

272 <key>LaunchOnlyOnce</key> <true/>

273 <key>ProgramArguments</key>

274 <array>

275 <string>/Library/Application Support/VirtualBox/LaunchDaemons/VirtualBoxStartup.sh</string>

276 <string>restart</string>

277 </array>

278 </dict>

279 </plist>

280

281 App extensions

282

283 com.microsoft.onenote.mac.shareextension

284

285 Bad kernel extensions

286

287 /System/Library/Extensions/AppleOSXUSBNCM.kext

288

289 Installations

290

291 Microsoft OneNote: 10/1/15, 4:49 PM

292 Microsoft OneNote: 9/28/15, 7:45 PM

293 Adobe Flash Player: 9/22/15, 9:44 PM

294 Microsoft OneNote: 8/25/15, 5:34 PM

295 Google Earth: 8/21/15, 12:03 PM

296

297 Elapsed time (sec): 361

Reply

Answer 3

Linc Davis

Level 10

209,547 points

Oct 2, 2015 8:31 AM in response to macrook015

If you are the original poster in this discussion, please sign in to ASC with the same ID you used before. Otherwise I suggest you start your own discussion.

Reply

Answer 4

dnaga Author

Level 1

0 points

Oct 2, 2015 8:37 AM in response to Linc Davis

Below are the results from the test. Please suggest.

----------------