Q: com.apple.AddressBook.InternetAccountsBridge[2010]: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mDNSResponder ... more
-
Dec 13, 2015 3:58 PMby Linc Davis,Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
-
Dec 14, 2015 10:38 AMby Linc Davis,1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, please back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the requisite skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Another indication that the test is safe can be found in this thread, and this one, for example, where the comment in which I suggested it was recommended by one of the Apple Community Specialists, as explained here.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is intermittently slow, run the test during a slowdown.
You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual before running it. If you can only test in safe mode, do that.
6. If you have more than one user, and only one user is affected by the problem,, and the affected user is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any one of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If the test is taking much longer than usual to run because the computer is very slow, you might be prompted for your password a second time. The authorization that you grant by entering it expires automatically after five minutes.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
Test startedPart 1 of 4 done at: … sec
…
Part 4 of 4 done at: … secThe test results are on the Clipboard.
Please close this window.The intervals between parts won't be exactly equal, but they give a rough indication of progress.
Wait for the final message "Please close this window" to appear. If you don't see it within about 15 minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step. You'll have incomplete results, but still something. If you close the Terminal window while the test is still running, the partial results won't be saved and you'll have to start over.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been saved to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "close this window" message. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the software that runs this website. Please post the test results on Pastebin, then post a link here to the page you created.
If you have an account on Pastebin, please don't select Private from the Paste Exposure menu on the page, because then no one but you will be able to see it.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
______________________________________________________________
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
-
Dec 14, 2015 2:32 PMby Madman1234,I have a Macbook Pro Retina, so it's fine
1 Start time: 22:26:35 12/14/15
2
3 Revision: 1407
4
5 Model Identifier: MacBookPro12,1
6 Boot ROM Version: MBP121.0167.B15
7 System Version: OS X 10.11.2 (15C50)
8 Kernel Version: Darwin 15.2.0
9 Time since boot: 3:13
10
11 USB
12
13 USB-PS/2 Optical Mouse (Logitech Inc.)
14
15 Energy impact, lifetime (relative)
16
17 WindowServer (UID 88): 778.88
18 com.apple.WebKit.WebContent (UID 501): 24.52
19 bash (UID 501): 5.35
20 Safari (UID 501): 3.24
21 com.apple.WebKit.WebContent (UID 501): 2.39
22
23 Energy impact, sampled (relative)
24
25 WindowServer (UID 88): 6.18
26 mdworker (UID 501): 2.96
27 kernel_task (UID 0): 2.47
28 Terminal (UID 501): 2.37
29 AddressBookSourceSync (UID 501): 2.01
30
31 GPU usage, lifetime (ms/s)
32
33 WindowServer (UID 88): 1580.38
34 kernel_task (UID 0): 211.22
35 com.apple.WebKit.WebContent (UID 501): 31.01
36 com.apple.WebKit.WebContent (UID 501): 2.16
37
38 GPU usage, sampled (ms/s)
39
40 WindowServer (UID 88): 6.86
41
42 CPU usage, lifetime (ms/s)
43
44 com.apple.WebKit.WebContent (UID 501): 92.20
45 kernel_task (UID 0): 54.26
46 bash (UID 501): 53.51
47 WindowServer (UID 88): 42.13
48 Safari (UID 501): 26.03
49 com.apple.WebKit.WebContent (UID 501): 18.21
50
51 CPU usage, sampled (ms/s)
52
53 mdworker (UID 501): 54.80
54 WindowServer (UID 88): 23.15
55 AddressBookSourceSync (UID 501): 19.46
56 com.apple.AddressBook.InternetAc (UID 501): 8.87
57 sandboxd (UID 0): 7.50
58 socketfilterfw (UID 0): 5.09
59 com.apple.WebKit.WebContent (UID 501): 4.78
60 com.apple.WebKit.WebContent (UID 501): 3.85
61
62 Memory (MB)
63
64 kernel_task (UID 0): 1022
65
66 Firewall: On
67
68 TCP/IP
69
70 DHCP Configuration
71
72 System caches/logs
73
74 2,2 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
75
76 Diagnostic reports
77
78 2015-12-14 OutBank crash
79
80 HID errors: 13
81
82 Kernel log
83
84 Dec 13 17:27:21 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xec80597b599f7873
85 Dec 13 19:02:23 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xec80597b59abe6fb
86 Dec 13 20:01:31 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xec80597b51744e6b
87 Dec 13 21:45:48 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xec80597b51897e6b
88 Dec 14 00:08:23 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xec80597b5185b4bb
89 Dec 14 09:33:23 Process launchd [1] disabling system-wide I/O Throttling
90 Dec 14 09:33:23 Process launchd [1] disabling system-wide CPU Throttling
91 Dec 14 09:34:04 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x1804914c06dd60f3, provider is 0x1804914b479e82f3
92 Dec 14 09:34:04 init: error getting PHY_MODE; using MODE_UNKNOWN
93 Dec 14 09:34:04 [IGPU] Scheduler Throttle Cap = 100ms.
94 Dec 14 09:35:58 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0xd785d63051311e2b, provider is 0xd785d62f91bcd42b
95 Dec 14 09:35:58 init: error getting PHY_MODE; using MODE_UNKNOWN
96 Dec 14 09:37:46 considerRebuildOfPrelinkedKernel com.apple.iokit.IOEthernetAVBController triggered rebuild
97 Dec 14 09:38:33 Process launchd [1] disabling system-wide I/O Throttling
98 Dec 14 09:38:33 Process launchd [1] disabling system-wide CPU Throttling
99 Dec 14 09:38:46 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0xcd05aaa17825e28b, provider is 0xcd05aaa0b8d1048b
100 Dec 14 09:38:46 init: error getting PHY_MODE; using MODE_UNKNOWN
101 Dec 14 09:38:47 [IGPU] Scheduler Throttle Cap = 100ms.
102 Dec 14 09:40:33 considerRebuildOfPrelinkedKernel com.apple.iokit.IOEthernetAVBController triggered rebuild
103 Dec 14 09:42:03 utun_start: ifnet_disable_output returned error 12
104 Dec 14 09:42:03 utun_start: ifnet_disable_output returned error 12
105 Dec 14 19:13:16 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0xc47b505c41c6faf1, provider is 0xc47b505b826babf1
106 Dec 14 19:13:16 init: error getting PHY_MODE; using MODE_UNKNOWN
107 Dec 14 19:13:17 [IGPU] Scheduler Throttle Cap = 100ms.
108 Dec 14 22:20:14 ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xc0bf77f707f45b17
109
110 System log
111
112 Dec 14 22:17:57 OutBank: CGContextSaveGState: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
113 Dec 14 22:17:57 OutBank: CGContextConcatCTM: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
114 Dec 14 22:17:57 OutBank: CGContextRestoreGState: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
115 Dec 14 22:17:57 OutBank: CGContextGetCTM: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
116 Dec 14 22:17:57 OutBank: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
117 Dec 14 22:17:57 OutBank: CGContextSaveGState: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
118 Dec 14 22:17:57 OutBank: CGContextConcatCTM: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
119 Dec 14 22:17:57 OutBank: CGContextSaveGState: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
120 Dec 14 22:17:57 OutBank: CGContextSetCompositeOperation: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
121 Dec 14 22:17:57 OutBank: CGContextDrawImages: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
122 Dec 14 22:17:57 OutBank: CGContextRestoreGState: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
123 Dec 14 22:17:57 OutBank: CGContextRestoreGState: invalid context 0x0. If you want to see the backtrace, please set CG_CONTEXT_SHOW_BACKTRACE environmental variable.
124 Dec 14 22:18:25 com.apple.backupd: Error: (-8084) SrcErr:YES Copying /Users/USER/Library/Containers/de.stoegerit.OutBankMac/Data/Library/Saved Application State/de.stoegerit.OutBankMac.savedState/windows.plist to (null)
125 Dec 14 22:19:40 WindowServer: _CGXRemoveWindowFromWindowMovementGroup: window 0x38 is not attached to window 0x47
126 Dec 14 22:19:41 Safari: tcp_connection_tls_session_error_callback_imp 178 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22
127 Dec 14 22:20:10 Safari: tcp_connection_tls_session_error_callback_imp 177 __tcp_connection_tls_session_callback_write_block_invoke.434 error 32
128 Dec 14 22:20:10 Safari: tcp_connection_tls_session_error_callback_imp 176 __tcp_connection_tls_session_callback_write_block_invoke.434 error 32
129 Dec 14 22:20:10 Safari: tcp_connection_tls_session_error_callback_imp 175 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22
130 Dec 14 22:20:10 Safari: tcp_connection_tls_session_error_callback_imp 173 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22
131 Dec 14 22:21:36 Safari: tcp_connection_tls_session_error_callback_imp 185 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22
132 Dec 14 22:21:38 WindowServer: _CGXRemoveWindowFromWindowMovementGroup: window 0x38 is not attached to window 0x47
133 Dec 14 22:21:39 Safari: tcp_connection_tls_session_error_callback_imp 186 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22
134 Dec 14 22:22:06 Safari: tcp_connection_tls_session_error_callback_imp 184 __tcp_connection_tls_session_callback_write_block_invoke.434 error 32
135 Dec 14 22:22:06 Safari: tcp_connection_tls_session_error_callback_imp 181 __tcp_connection_tls_session_callback_write_block_invoke.434 error 32
136 Dec 14 22:22:08 Safari: tcp_connection_tls_session_error_callback_imp 182 __tcp_connection_tls_session_callback_write_block_invoke.434 error 32
137
138 launchd log
139
140 Dec 12 20:04:24 com.apple.xpc.launchd.domain.system: Caller not allowed to perform action: open.1050, action = service submission, code = 1: Operation not permitted, uid = 501, euid = 501, gid = 20, egid = 20, asid = 100000
141 Dec 12 20:04:25 com.apple.xpc.launchd.domain.system: Could not read path: path = //System/Library/LaunchAgents/com.apple.MDCrashReportd.plist, error = 2: No such file or directory
142 Dec 12 20:04:25 com.apple.xpc.launchd.domain.system: Caller not allowed to perform action: launchctl.1090, action = start service, code = 1: Operation not permitted, uid = 501, euid = 501, gid = 20, egid = 20, asid = 100000
143 Dec 13 09:03:15 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.
144 Dec 13 09:03:15 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose
145 Dec 13 09:03:37 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.327, service = com.shazam.mac.ShazamHelper, error = 119: Service is disabled
146 Dec 13 09:03:37 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.327, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
147 Dec 13 16:19:10 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.
148 Dec 13 16:19:10 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose
149 Dec 13 16:19:24 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.261, service = com.shazam.mac.ShazamHelper, error = 119: Service is disabled
150 Dec 13 16:19:24 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.261, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
151 Dec 14 09:34:03 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.
152 Dec 14 09:34:03 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose
153 Dec 14 09:34:17 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.334, service = com.shazam.mac.ShazamHelper, error = 119: Service is disabled
154 Dec 14 09:34:17 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.334, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
155 Dec 14 09:35:57 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.
156 Dec 14 09:35:57 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose
157 Dec 14 09:38:46 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.
158 Dec 14 09:38:46 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose
159 Dec 14 09:39:02 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.264, service = com.shazam.mac.ShazamHelper, error = 119: Service is disabled
160 Dec 14 09:39:02 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.264, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
161 Dec 14 19:13:16 : Failed to remove file or directory: name = dyld_shared_cache_x86_64h, error = 1: Operation not permitted. Further logging suppressed.
162 Dec 14 19:13:16 com.apple.airplaydiagnostics.server: Unrecognized MachService property: ResetAtClose
163 Dec 14 19:13:43 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.257, service = com.shazam.mac.ShazamHelper, error = 119: Service is disabled
164 Dec 14 19:13:43 com.apple.xpc.launchd.user.domain.501.100007.Aqua: Could not import service from caller: caller = otherbsd.257, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
165
166 Console log
167
168 Dec 9 09:33:02 fontd: Failed to open read-only database, regenerating DB
169 Dec 12 08:52:09 fontd: Failed to open read-only database, regenerating DB
170 Dec 13 09:03:38 fontd: Failed to open read-only database, regenerating DB
171 Dec 14 09:36:18 fontd: XType - wal checkpoint: 0, -1, -1.
172 Dec 14 09:39:02 fontd: Failed to open read-only database, regenerating DB
173 Dec 14 11:08:48 hps: Error loading /Library/Internet Plug-Ins/Silverlight.plugin/Contents/MacOS/agcore: dlopen(/Library/Internet Plug-Ins/Silverlight.plugin/Contents/MacOS/agcore, 262): no suitable image found. Did find:
174 /Library/Internet Plug-Ins/Silverlight.plugin/Contents/MacOS/agcore: mach-o, but wrong architecture
175 Dec 14 19:13:44 fontd: Failed to open read-only database, regenerating DB
176
177 Loaded kernel extensions
178
179 com.checkpoint.cpfw (1.0)
180
181 System services loaded
182
183 com.apple.logd
184 - status: 1
185 com.apple.watchdogd
186 com.checkpoint.epc.service
187 com.microsoft.office.licensing.helper
188 com.oracle.java.Helper-Tool
189 com.teamviewer.Helper
190 com.transcend.TSRecoverHandlerHelp
191 com.transcend.TSSleepHandlerHelp
192 com.transcend.TSTRIMHandlerHelp
193
194 Login services loaded
195
196 com.checkpoint.eps.gui
197 com.checkpoint.eps.upgrader
198 com.citrix.AuthManager_Mac
199 com.citrix.ReceiverHelper
200 com.citrix.ServiceRecords
201 com.google.keystone.user.agent
202 com.oracle.java.Java-Updater
203
204 Login services disabled
205
206 com.shazam.mac.ShazamHelper
207
208 User services disabled
209
210 com.shazam.mac.ShazamHelper
211
212 Contents of /Library/LaunchAgents/com.checkpoint.eps.gui.plist
213 - mod date: Jun 21 12:54:28 2015
214 - size (B): 564
215 - checksum: 970934272
216
217 <?xml version="1.0" encoding="UTF-8"?>
218 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
219 <plist version="1.0">
220 <dict>
221 <key>Label</key>
222 <string>com.checkpoint.eps.gui</string>
223 <key>ProgramArguments</key>
224 <array>
225 <string>open</string>
226 <string>-a</string>
227 <string>Endpoint Security VPN.app</string>
228 </array>
229 <key>RunAtLoad</key>
230 <true/>
231 <key>ServiceIPC</key>
232 <false/>
233 </dict>
234 </plist>
235
236 Contents of /Library/LaunchAgents/com.checkpoint.eps.upgrader.plist
237 - mod date: Jun 21 12:54:29 2015
238 - size (B): 738
239 - checksum: 2620573250
240
241 <?xml version="1.0" encoding="UTF-8"?>
242 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
243 <plist version="1.0">
244 <dict>
245 <key>Label</key>
246 <string>com.checkpoint.eps.upgrader</string>
247 <key>ProgramArguments</key>
248 <array>
249 <string>/Library/Application Support/Checkpoint/Endpoint Connect/Upgrader</string>
250 </array>
251 <key>WatchPaths</key>
252 <array>
253 <string>/Library/Application Support/Checkpoint/Endpoint Connect/pkg</string>
254 </array>
255 <key>AbandonProcessGroup</key>
256 <true/>
257 <key>WorkingDirectory</key>
258 <string>/Library/Application Support/Checkpoint/Endpoint Connect</string>
259 </dict>
260 </plist>
261
262 Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
263 - mod date: Jul 12 20:00:10 2015
264 - size (B): 104
265 - checksum: 2739741283
266
267 <?xml version="1.0" encoding="UTF-8"?>
268 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
269 <plist version="1.0">
270 <dict>
271 <key>Label</key>
272 <string>com.oracle.java.Java-Updater</string>
273 <key>ProgramArguments</key>
274 <array>
275 <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
276 <string>-bgcheck</string>
277 </array>
278 <key>StandardErrorPath</key>
279 <string>/dev/null</string>
280 <key>StandardOutPath</key>
281 <string>/dev/null</string>
282 <key>StartCalendarInterval</key>
283 <dict>
284 <key>Hour</key>
285 <integer>7</integer>
286 <key>Minute</key>
287 <integer>20</integer>
288 <key>Weekday</key>
289 <integer>3</integer>
290 </dict>
291 </dict>
292
293 ...and 1 more line(s)
294
295 Contents of /Library/LaunchDaemons/com.checkpoint.epc.service.plist
296 - mod date: Jun 21 12:54:28 2015
297 - size (B): 1077
298 - checksum: 73522609
299
300 <?xml version="1.0" encoding="UTF-8"?>
301 <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
302 <plist version="1.0">
303 <dict>
304 <key>Label</key>
305 <string>com.checkpoint.epc.service</string>
306 <key>ProgramArguments</key>
307 <array>
308 <string>/Library/Application Support/Checkpoint/Endpoint Connect/TracSrvWrapper</string>
309 </array>
310 <key>WorkingDirectory</key>
311 <string>/Library/Application Support/Checkpoint/Endpoint Connect</string>
312 <key>RunAtLoad</key>
313 <true/>
314 <key>KeepAlive</key>
315 <dict>
316 <key>SuccessfulExit</key>
317 <false/>
318 </dict>
319 <key>ServiceIPC</key>
320 <true/>
321 <key>EnvironmentVariables</key>
322 <dict>
323 <key>TRACLOG</key>
324 <string>true</string>
325
326 ...and 7 more line(s)
327
328 Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist
329 - mod date: Mar 2 14:11:02 2015
330 - size (B): 611
331 - checksum: 2586050363
332
333 <?xml version="1.0" encoding="UTF-8"?>
334 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
335 <plist version="1.0">
336 <dict>
337 <key>Disabled</key>
338 <true/>
339 <key>Label</key>
340 <string>com.teamviewer.service</string>
341 <key>KeepAlive</key>
342 <true/>
343 <key>ProgramArguments</key>
344 <array>
345 <string>/Applications/TeamViewer.app/Contents/MacOS/TeamViewer_Service</string>
346 <string>-Module</string>
347 <string>Full</string>
348 </array>
349 <key>RunAtLoad</key>
350 <true/>
351 <key>WorkingDirectory</key>
352 <string>/Applications/TeamViewer.app/Contents/MacOS</string>
353 </dict>
354 </plist>
355
356 Contents of /Library/LaunchDaemons/com.transcend.TSRecoverHandlerHelp.plist
357 - mod date: Aug 14 17:47:26 2015
358 - size (B): 596
359 - checksum: 2394320075
360
361 <?xml version="1.0" encoding="UTF-8"?>
362 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
363 <plist version="1.0">
364 <dict>
365 <key>Label</key>
366 <string>com.transcend.TSRecoverHandlerHelp</string>
367 <key>MachServices</key>
368 <dict>
369 <key>com.transcend.TSRecoverHandlerHelp</key>
370 <true/>
371 </dict>
372 <key>Program</key>
373 <string>/Library/PrivilegedHelperTools/com.transcend.TSRecoverHandlerHelp</stri ng>
374 <key>ProgramArguments</key>
375 <array>
376 <string>/Library/PrivilegedHelperTools/com.transcend.TSRecoverHandlerHelp</stri ng>
377 </array>
378 </dict>
379 </plist>
380
381 Contents of /Library/LaunchDaemons/com.transcend.TSSleepHandlerHelp.plist
382 - mod date: Aug 14 17:47:26 2015
383 - size (B): 619
384 - checksum: 879412800
385
386 <?xml version="1.0" encoding="UTF-8"?>
387 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
388 <plist version="1.0">
389 <dict>
390 <key>KeepAlive</key>
391 <true/>
392 <key>Label</key>
393 <string>com.transcend.TSSleepHandlerHelp</string>
394 <key>MachServices</key>
395 <dict>
396 <key>com.transcend.TSSleepHandlerHelp</key>
397 <true/>
398 </dict>
399 <key>Program</key>
400 <string>/Library/PrivilegedHelperTools/com.transcend.TSSleepHandlerHelp</string >
401 <key>ProgramArguments</key>
402 <array>
403 <string>/Library/PrivilegedHelperTools/com.transcend.TSSleepHandlerHelp</string >
404 </array>
405 </dict>
406 </plist>
407
408 Contents of /Library/LaunchDaemons/com.transcend.TSTRIMHandlerHelp.plist
409 - mod date: Aug 14 17:47:26 2015
410 - size (B): 584
411 - checksum: 2461208954
412
413 <?xml version="1.0" encoding="UTF-8"?>
414 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
415 <plist version="1.0">
416 <dict>
417 <key>Label</key>
418 <string>com.transcend.TSTRIMHandlerHelp</string>
419 <key>MachServices</key>
420 <dict>
421 <key>com.transcend.TSTRIMHandlerHelp</key>
422 <true/>
423 </dict>
424 <key>Program</key>
425 <string>/Library/PrivilegedHelperTools/com.transcend.TSTRIMHandlerHelp</string>
426 <key>ProgramArguments</key>
427 <array>
428 <string>/Library/PrivilegedHelperTools/com.transcend.TSTRIMHandlerHelp</string>
429 </array>
430 </dict>
431 </plist>
432
433 Contents of Library/LaunchAgents/com.google.keystone.agent.plist
434 - mod date: Sep 24 20:24:23 2015
435 - size (B): 803
436 - checksum: 1800037854
437
438 <?xml version="1.0" encoding="UTF-8"?>
439 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
440 <plist version="1.0">
441 <dict>
442 <key>Label</key>
443 <string>com.google.keystone.user.agent</string>
444 <key>LimitLoadToSessionType</key>
445 <string>Aqua</string>
446 <key>ProgramArguments</key>
447 <array>
448 <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
449 <string>-runMode</string>
450 <string>ifneeded</string>
451 </array>
452 <key>RunAtLoad</key>
453 <true/>
454 <key>StartInterval</key>
455 <integer>3523</integer>
456 <key>StandardErrorPath</key>
457 <string>/dev/null</string>
458 <key>StandardOutPath</key>
459 <string>/dev/null</string>
460 </dict>
461 </plist>
462
463 User login items
464
465 iTunesHelper
466 - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
467 VMware Fusion Start Menu
468 - /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
469 SMARTReporter
470 - /Applications/SMARTReporter.app
471 owncloud
472 - /Applications/owncloud.app
473
474 Safari extensions
475
476 Adblock Plus
477 - org.adblockplus.adblockplussafari
478
479 iCloud errors
480
481 comapple.CloudPhotosConfiguration 20
482 cloudphotosd 20
483 cloudd 19
484 Finder 6
485 bird 5
486 Safari 1
487
488 Continuity errors
489
490 sharingd 58
491
492 Bad permissions: 9
493
494 Extensions
495
496 /System/Library/Extensions/cpfw.kext
497 - com.checkpoint.cpfw
498
499 Applications
500
501 /Applications/Citrix Receiver.app
502 - com.citrix.receiver.nomas
503 /Applications/Geekbench.app
504 - ca.primatelabs.Geekbench23
505 /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
506 - com.microsoft.ASApplication
507 /Applications/Microsoft Office 2011/Office/Equation Editor.app
508 - com.microsoft.EquationEditor
509 /Applications/Microsoft Office 2011/Office/Microsoft Office Setup Assistant.app
510 - com.microsoft.office.setupassistant
511 /Applications/Microsoft Office 2011/Office/Microsoft Query.app
512 - com.microsoft.Query
513 /Applications/TaiG.app
514 - com.jailbreak.TaiG
515 /Applications/iFunBox.app
516 - com.iFunBoxDevTeam.iFunBox
517 /Library/Application Support/Citrix Receiver/Citrix Receiver Launcher.app
518 - com.citrix.CitrixReceiverLauncher
519 /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
520 - com.microsoft.autoupdate2
521 /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
522 - com.microsoft.error_reporting
523 /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
524 - com.microsoft.netlib.shipassertprocess
525 /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
526 - com.microsoft.silverlight.sllauncher
527 /Users/USER/Applications/Chrome Apps.localized/Profile 1 apdfllckaahabafndbhieahigkjlhalf.app
528 - com.google.Chrome.app.Profile-1-apdfllckaahabafndbhieahigkjlhalf
529 /Users/USER/Applications/Chrome Apps.localized/Profile 1 blpcfgokakmgnkcojhhkbfbldkacnbeo.app
530 - com.google.Chrome.app.Profile-1-blpcfgokakmgnkcojhhkbfbldkacnbeo
531 /Users/USER/Applications/Chrome Apps.localized/Profile 1 coobgpohoikkiipiblmjeljniedjpjpf.app
532 - com.google.Chrome.app.Profile-1-coobgpohoikkiipiblmjeljniedjpjpf
533 /Users/USER/Applications/Chrome Apps.localized/Profile 1 pjkljhegncpnkpknbcohdijeoejaedia.app
534 - com.google.Chrome.app.Profile-1-pjkljhegncpnkpknbcohdijeoejaedia
535 /Users/USER/Applications/Chrome Apps.localized/app_list.app
536 - com.google.Chrome.app.Default-app_list
537 /Users/USER/Library/Application Support/Google/Chrome/Profile 1/Web Applications/_crx_aohghmighlieiainnegkcijnfilokake/Profile 1 aohghmighlieiainnegkcijnfilokake.app
538 - com.google.Chrome.app.Profile-1-aohghmighlieiainnegkcijnfilokake-internal
539 /Users/USER/Library/Application Support/Google/Chrome/Profile 1/Web Applications/_crx_apdfllckaahabafndbhieahigkjlhalf/Profile 1 apdfllckaahabafndbhieahigkjlhalf.app
540 - com.google.Chrome.app.Profile-1-apdfllckaahabafndbhieahigkjlhalf-internal
541 /Users/USER/Library/Application Support/Google/Chrome/Profile 1/Web Applications/_crx_blpcfgokakmgnkcojhhkbfbldkacnbeo/Profile 1 blpcfgokakmgnkcojhhkbfbldkacnbeo.app
542 - com.google.Chrome.app.Profile-1-blpcfgokakmgnkcojhhkbfbldkacnbeo-internal
543 /Users/USER/Library/Application Support/Google/Chrome/Profile 1/Web Applications/_crx_coobgpohoikkiipiblmjeljniedjpjpf/Profile 1 coobgpohoikkiipiblmjeljniedjpjpf.app
544 - com.google.Chrome.app.Profile-1-coobgpohoikkiipiblmjeljniedjpjpf-internal
545 /Users/USER/Library/Application Support/Google/Chrome/Profile 1/Web Applications/_crx_pjkljhegncpnkpknbcohdijeoejaedia/Profile 1 pjkljhegncpnkpknbcohdijeoejaedia.app
546 - com.google.Chrome.app.Profile-1-pjkljhegncpnkpknbcohdijeoejaedia-internal
547 /usr/local/libexec/AuthManager_Mac.app
548 - com.citrix.AuthManagerMac
549 /usr/local/libexec/ReceiverHelper.app
550 - com.citrix.ReceiverHelper
551 /usr/local/libexec/ServiceRecords.app
552 - Citrix.ServiceRecords
553
554 Frameworks
555
556 /Library/Frameworks/DivXInstallerUtilities.framework
557 - com.yourcompany.DivXInstallerUtilities
558
559 PrefPane
560
561 /Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/lib/deploy/JavaControlPanel.pref Pane
562 - com.oracle.java.JavaControlPanel
563 /Library/PreferencePanes/Tuxera NTFS.prefPane
564 - com.tuxera.ntfs.mac.prefpane
565
566 Bundles
567
568 /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
569 - com.citrix.citrixicaclientplugIn
570 /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
571 - com.oracle.java.JavaAppletPlugin
572 /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
573 - com.microsoft.sharepoint.browserplugin
574 /Library/Internet Plug-Ins/Silverlight.plugin
575 - com.microsoft.SilverlightPlugin
576 /Users/USER/Library/Address Book Plug-Ins/SkypeABDialer.bundle
577 - com.skype.skypeabdialer
578 /Users/USER/Library/Address Book Plug-Ins/SkypeABSMS.bundle
579 - com.skype.skypeabsms
580 /Users/USER/Library/Application Support/Google/Chrome/PepperFlash/19.0.0.226/PepperFlashPlayer.plugin
581 - com.macromedia.PepperFlashPlayer.pepper
582 /Users/USER/Library/Internet Plug-Ins/WebEx64.plugin
583 - com.cisco_webex.plugin.gpc64
584
585 Library paths
586
587 /Applications/Microsoft Office 2011/Office/MicrosoftSetupUI.framework/Libraries/mbupgx.dylib
588 /Applications/Microsoft Office 2011/Office/OPF.framework/Versions/14/Resources/OPF_Common.dylib
589 /Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/Fm20.dylib
590 /Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/MicrosoftOLE2TypesLib.dylib
591 /Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/RefEdit.dylib
592 /Applications/Microsoft Office 2011/Office/Visual Basic for Applications.framework/Versions/14/Frameworks/RichEdit.dylib
593 /Library/Application Support/Checkpoint/Endpoint Connect/Qt/plugins/imageformats/libqgif.dylib
594 /Users/USER/Library/Application Support/Firefox/Profiles/so0bvi35.default/gmp-gmpopenh264/1.5.1/libgmpopenh264. dylib
595 /Users/USER/Library/Application Support/Google/Chrome/WidevineCDM/1.4.8.866/_platform_specific/mac_x64/libwidev inecdm.dylib
596 /Users/USER/Library/Application Support/WebEx Folder/T30_MC/cmcrypto-30.0.0.2.dylib
597 /Users/USER/Library/Application Support/WebEx Folder/T30_MC/libcrypto-0.2.5.3.dylib
598 /Users/USER/Library/Application Support/WebEx Folder/T30_MC/libssl-0.2.5.3.dylib
599 /Users/USER/Library/Application Support/WebEx Folder/T30_MC/xml-29.0.0.1.dylib
600 /Users/USER/Library/Application Support/WebEx Folder/onprem_1224/atpp-7.1.20.0.dylib
601 /Users/USER/Library/Application Support/WebEx Folder/onprem_1224/cmcrypto-29.13.0.2.dylib
602 /Users/USER/Library/Application Support/WebEx Folder/onprem_1224/libcrypto.0.2.5.4.dylib
603 /Users/USER/Library/Application Support/WebEx Folder/onprem_1224/libssl.0.2.5.4.dylib
604 /Users/USER/Library/Application Support/WebEx Folder/onprem_1224/xml-11.18.32.0.dylib
605 /Users/USER/Library/Application Support/WebEx Folder/onprem_1524/cmcrypto-29.13.0.2.dylib
606 /Users/USER/Library/Application Support/WebEx Folder/onprem_1524/libcrypto-0.2.5.4.dylib
607 /Users/USER/Library/Application Support/WebEx Folder/onprem_1524/libssl-0.2.5.4.dylib
608 /Users/USER/Library/Application Support/WebEx Folder/onprem_1524/xml-29.0.0.1.dylib
609 /usr/local/lib/libTrAPI.dylib
610
611 App extensions
612
613 com.owncloud.desktopclient.FinderSyncExt
614
615 Modifications
616
617 file added: /Applications/VLC.app/Contents/MacOS/plugins/plugins.dat
618
619 Bad kernel extensions
620
621 /System/Library/Extensions/AppleOSXUSBNCM.kext
622
623 Installations
624
625 Microsoft Remote Desktop: 03.12.15, 17:43
626 Albelli Fotobücher: 02.12.15, 19:55
627 Office 2011 14.5.8 Update: 30.11.15, 08:56
628 Java 8 Update 66: 25.11.15, 07:20
629 Java 8 Update 66: 24.11.15, 22:35
630
631 Elapsed time (sec): 330
-
Dec 14, 2015 7:56 PMby Linc Davis,Please remove "Check Point Endpoint Security" and see whether there's an improvement.
Any third-party software that doesn't install from the App Store or by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.
-
Dec 14, 2015 10:12 PMby Madman1234,You can see, that the process AddressBookSourceSync (UID 501): 19.46 uses a lot of CPU resources. Something is wrong here.
As I said, I have the same issue also on other clients running 10.11.2. On other clients there is no VPN Client installed.
I will try to configure the Address Book from a VMWare Fusion OS X install and I will check, if the problem is version specific. Starting from 10.11. going to 10.11.1. and 10.11.2What do you think?
-
Dec 15, 2015 7:15 AMby Madman1234,I would like to know if I am on the correct track:
Do I need to create a new file under /usr/share/sandbox called com.apple.AddressBook.InternetAccountsBridge.sb ?
And there I need to allow access to /private/var/run/mDNSResponder?
Like:
(allow file-read* (literal "/private/var/run/mDNSResponder"))
?
Thanks
-
Dec 15, 2015 7:50 AMby Madman1234,I created a sandbox permission file with the following:
1)
(version 1)
(allow network-inbound
(local tcp "*:*")
(local udp "*:*")
(local udp "localhost:*")
)
(allow network-outbound
(literal "/private/var/run/mDNSResponder")
(remote tcp "*:*")
(remote udp "localhost:*"))
(allow default)
; all|allow
2)
I ran
sudo sandbox-exec -f /usr/share/sandbox/com.apple.AddressBook.InternetAccountsBridge.sb /System/Library/Frameworks/AddressBook.framework/Versions/A/XPCServices/com.app le.AddressBook.InternetAccountsBridge.xpc/Contents/MacOS/com.apple.AddressBook.I nternetAccountsBridge
But it still gives me the error. Is this the correct sandboxed application? Why is it still showingthe deny message?
-
Dec 16, 2015 1:52 AMby fergycool,Did a solution ever appear for this issue or did it go quiet as the bad smell of piracy appeared?
I've got the exact same issue with a (real!) MBP mid 2012 running OSX 10.11.2.
Opened Contacts, to start sending xmas cards, and Contacts get's the spinning rainbow wheel. Opened up console and there's a lot of messages along the lines of:
Dec 16 09:44:19 hybrid kernel[0]: Sandbox: com.apple.Addres(7497) deny(1) network-outbound /private/var/run/mDNSResponder
Dec 16 09:44:19 hybrid com.apple.AddressBook.InternetAccountsBridge[7497]: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Contacts are synced with Gmail, Linkedin and Facebook. Not iCloud.
The only unusual thing about this Mac is that it was purchased with OS X 10.9, then subsequently upgraded to Yosemite then El Capitan. Well, that's not that unusual!
