CarPlay not working with iPhone 16 Pro

Following the posts here I’ve tried 3 cables. Now ordered a data usb to usb c. This phone is known as a bad apple! I’ve had nothing but trouble with it. Wish I had never upgraded.

I changed to the recommended mophie cord ( since apple does not make a USB-USBC, and periodically have the problem because the USB-C does not click in the way the prior apple connector did.

Get in your car. Open your phone from your car display. ‘Add phone’

Go to your phone. Go to Bluetooth. Mine said ‘Car Multimedia’. Hit that. It should sync!

Go to settings

general

Transfer or reset

reset

try your CarPlay again 👍

There is no way you could have known in advance… If the CarPlay implementation in the Toyota CHR is sufficiently old, and though it may have worked with your iPhone 12, there is no assurance that it would have worked with an iPhone 15 Pro either.

Verify with the Toyota service department that no outstanding CarPlay update is available for your vehicle, and then review the owner's manual to confirm you are doing everything correctly to pair the iPhone 16 with your vehicle. What I mentioned above about the lack of multi-link BlueTooth may also be an issue where you cannot have the phone paired to two separate Bluetooth connections in the vehicle.

I had the same problem as everyone else connecting my new iPhone 16pro to Apple CarPlay in my Lexus. This suggestion, plus checking the Content & Privacy restrictions worked! It all now works just like it did with my old iPhone 12pro. Thanks for all the tips everyone !

i was having the same issue, i went from iphone 13 pro to iphone 16, ive ordered 2 other cords and i finally got it to work. i got the usb c - lightning adapter from apple, you just connect it to your old charger and it worked right away!!!

Mercedes folks: I have a 2019 E class that supports CarPlay over USB. I can’t believe I didn’t look for this setting until now, but go to your Mercedes main screen and select Connections and then you should see Apple CarPlay, Android Auto, etc etc. I had to re-enable and reauthorize CarPlay on this screen. Prompts should pop up when you connect the cable to your iPhone 16. First I removed the phone from the Phone menu, and removed the car from the phones Bluetooth settings. No new cables needed, no changes in iPhone settings other than make sure Siri is enabled. Hope this helps.

iPhone and Sienna 2021: it ONLY works via cable, connected to the USB slot right of the steering wheel. It needs to be a cable that can transmit data, not just charge. On the display, press menu -> setup -> projection settings -> Apple CarPlay: switch to On. This disables Bluetooth ( fine, you are connected via cable ). On your IPhone under Settings, you may need to turn on “Apple Intelligence and Siri” ( why?? I don’t want it! ), perhaps turn off privacy settings and/or turn on CarPlay. Good luck.

After getting support from If you need help with CarPlay - Apple Support, my new iPhone 16 Pro now works with my CarPlay. :)

Doesn’t work for me. Seems when I switched from E75 to USb c. It will not connect thru the cable. My 13 pro was fine.

Need a usb-c/lightning ADAPTER

I had same issue rang Apple support they talked me through his to connect now no issue

I have same problem it intermittently connects some time stay connected than drops out again. I have to restart the car to get connect.

sadly this is one of the many issues I have with this new iPhone 16PRO

I for one would be happier if Apple Pay’s attention to product quality than bringing more emojis

I am having the same problem with my 2019 Acura TLX. Got the iPhone 16 pro and got the usb to usb-c Cable but only my audio works. My navigation doesn’t work with my CarPlay and it did with my last phone which was a 14 Pro.